Skip to content

Latest commit

 

History

History
191 lines (156 loc) · 9.82 KB

CHANGELOG.md

File metadata and controls

191 lines (156 loc) · 9.82 KB
Raw

Change Log

All notable changes to this project will be documented in this file. This project adheres to Semantic Versioning.

[1.3.2] - 2017-02-09

Summary

This is a bug-fix release

Known issues

Carried-over from prior releases:

  • For Windows, trigger an agent run after upgrade to get Puppet to create the necessary directory structures.
  • Upgrades on EL4-based systems are not supported.
  • Mac OS X Open Source package upgrades are not yet implemented.

Bug fixes

  • Service management wasn't always applied when intended (MODULES-3994)
  • Allow setting MSI installation parameters on Windows (MODULES-4214)
  • Ensure all variables are populated to prevent failures when STRICT_VARIABLES='yes'
  • Only update server.cfg if not already managed by PE
  • Enable the puppet service on Windows if service param includes it (MODULES-4243)
  • Add custom fact puppet_agent_appdata, as common_appdata was only defined in PE (MODULES-4241)
  • Use getvar to fix facts to work with the strict_variables setting (MODULES-3710)
  • Optionally move puppetres.dll on Windows upgrade (MODULES-4207)
  • Allow disabling proxy settings for yum repo (MODULES-4236)

[1.3.1] - 2016-11-17

Summary

This is a bug-fix release

Known issues

Carried-over from prior releases:

  • For Windows, trigger an agent run after upgrade to get Puppet to create the necessary directory structures.
  • Upgrades on EL4-based systems are not supported.
  • Mac OS X Open Source package upgrades are not yet implemented.

Bug fixes

  • Fix upgrading a global Solaris zone would break upgrading other zones (MODULES-4092)
  • Fix line endings of install_puppet.bat
  • Fix upgrading between releases of the same package version (MODULES-4030)

[1.3.0] - 2016-10-19

Summary

The addition of several OS support features and a considerable amount of compatibility and bug fixes.

Known issues

Carried-over from prior releases:

  • For Windows, trigger an agent run after upgrade to get Puppet to create the necessary directory structures.
  • Upgrades on EL4-based systems are not supported.
  • Mac OS X Open Source package upgrades are not yet implemented.

Features

  • Add support for Ubuntu 16.04 and Fedora 23
  • Allow MSI install path to be defined on Windows (MODULES-3571)
  • Allow agent upgrade on non-English versions for Windows (MODULES-3636)
  • Allow the use of a hosted repository for packages (MODULES-3872)
  • Remove POWER8 restriction for AIX (MODULES-3912)

Bug fixes

  • Fix upgrade process on Windows using a PID file (MODULES-3433)
  • Fix metadata to indicate support for Puppet 3.7
  • Fix upgrade process on Windows by stopping PXP service (MODULES-3449)
  • Add extra logging during upgrade process on Windows
  • Disable SSL verification on Xenial (PE-16317)
  • Fix preserving the environment name when upgrading on Windows (MODULES-3517)
  • Puppet run will fail if stringify_facts is set to true (MODULES-3591 MODULES-3951)
  • Fix infinite loop scenario on Windows during upgrade (MODULES-3434)
  • Fix the waiting process on Windows during an upgrade (MODULES-3657)
  • Fix duplicate resource error on AIX with PE (MODULES-3893)
  • Fix minor errors in RakeFile and spec_helper_acceptance
  • Fix setting permissions on Windows package
  • Update GPG Keys (RE-7976)
  • Fix puppet-agent suffix on Fedora (PE-16317)
  • Fix unless condition on SUSE and RedHat GPG key imports (MODULES-3894)
  • Avoid Unknown variable errors in Puppet 4 (MODULES-3896)
  • Fix logic for detecting Solaris 11 package name (PE-17663)
  • Fix spec test fixtures to use the Forge
  • Add Windows examples to README
  • Fix acceptance tests ignoring resource errors (MODULES-3953)
  • Add acceptance tests for manage_repo parameter (MODULES-3872)
  • Fix Windows package download URL (MODULES-3970)

[1.2.0] - 2016-05-04

Summary

Supports upgrades from puppet-agent packages! Applies to both PE and FOSS, for example upgrades from PE 2015.3.2 to 2015.3.3 and puppet-agent 1.3.0 to 1.4.0 are supported. Upgrading from older Puppet 3 versions is also no longer explicitly prevented. Adds support for Solaris 11.

Known issues

Carried-over from prior releases:

  • For Windows, trigger an agent run after upgrade to get Puppet to create the necessary directory structures.
  • Upgrades on EL4-based systems are not supported.
  • Upgrades on Fedora systems are not supported.

Newly identified issues:

  • Mac OS X Open Source package upgrades are not yet implemented.
  • AIX package names are based on PowerPC architecture version. PowerPC 8 is not yet supported.

Features

  • Upgrades between puppet-agent packages, such as 2015.2.x to 2015.3.x.
  • Adds support for Solaris 11.
  • The pluginsync setting was deprecated in puppet-agent 1.4.0. This module removes it when upgrading to that version or later unless otherwise managed.
  • Remove the lower-version requirement. All Puppet 3 versions potentially can be upgraded, although testing is only performed starting with Puppet/PE 3.8. Earlier versions likely work back to 3.5, as long as the manifest is compiled using 3.7+ with future parser enabled.

Bug fixes

  • Fixes the release identification for Amazon Linux distributions to use EL 6 packages.
  • Fix Debian upgrades for PE.
  • Support upgrades of 32-bit Windows packages for PE (via pe_repo).
  • Fixed an issue that would cause compilation to fail with Unknown function: 'pe_compiling_server_aio_build' in some environments.

[1.1.0] - 2016-03-01

Summary

The addition of several OS support features and a considerable amount of compatibility and bug fixes.

Known issues

While this release adds considerable features and bug fixes the following areas are known issues and require more work:

  • For Windows, trigger an agent run after upgrade to get Puppet to create the necessary directory structures.
  • There is currently ongoing work to allow for upgrading from 2015.2.x to 2015.3.x.
  • Solaris 11 support work is in progess, but currently still buggy.

Features

  • Adds support for SLES 10, Solaris 10, AIX.
  • Add OSX 10.9 upgrades.
  • Add no-internet Windows upgrade in PE.
  • Added puppet_master_server fact.
  • Adds /opt/puppetlabs to the managed directories.
  • Additional test checks for /opt/puppetlabs.

Bug fixes

  • Use rspec expect syntax for catching errors.
  • Base master_agent_version on pe_compiling_server_aio_build().
  • Update in metadata to include support for SLES 10 and 11.
  • Ensure pe-puppet/mcollective services stopped after removing the PUPpuppet and PUPmcollective packages.
  • Small readme typo fix.
  • Pass in Puppet agent PID as command line parameter to avoid recreating install_puppet.bat at every agent run.
  • Allow using the internal mirror when resolving gems.
  • Add Solaris 10 sparc to supported arch.
  • No longer converts Windows file resource to RAL catalog.
  • Create/use local_package_dir in params.pp.
  • Fix behavior for non-PE.
  • Fix specs for Windows changes.
  • Remove check for null $service_names.
  • Fix linter errors on Windows PR 66.
  • Use common_appdata on Windows.
  • Removes management of the puppet/mco services on Windows systems.
  • Add start/wait to Windows upgrade.
  • Pass in configured server to Windows MSI.
  • Fixes SLES11 GPG key import issue.
  • Fixed regex for SLES compatibility.
  • Ensures local MSI package resource defined on Windows.

[1.0.0] - 2015-07-28

Summary

Fixed minor bugs and improved documentation. Now a Puppet Supported module.

Features

  • Improved documentation of upgrade process.

Bug fixes

  • For Windows PE upgrades, by default install the agent version corresponding to the PE master.
  • Reset puppet.conf's classfile setting.

[0.2.0] - 2015-07-21

Summary

Added support for most systems with both Puppet 3.8 and Puppet-Agent packages released by Puppet Labs.

Features

  • Support for Debian 6/7, Ubuntu 12.04/14.04, SLES 12, and Windows 2003 through 2012R2.

Bug fixes

  • Fix puppet_agent module doesn't touch puppet.conf settings outside an INI section (PUP-4886)
  • Made internal classes private, using stdlib's assert_private helper
  • Migrate SSL cert directories individually to account for individual settings (PUP-4690)
  • Migrated mcollective configuration should prefer the new plugin location (PUP-4658)
  • Fixed updating mcollective configuration files with multiple libdir or plugin.yaml definitions (PUP-4746)

[0.1.0] - 2015-06-02

Added

  • Initial release of puppetlabs-puppet_agent, supporting Redhat and Centos 5/6/7.