rivalcfg is a small CLI utility program that allows you to configure SteelSeries Rival gaming mice on Linux and Windows (probably works on BSD and Mac OS too, but not tested).
Supported mice:
- SteelSeries Rival (1038:1384)
- SteelSeries Rival 100 (1038:1702)
- SteelSeries Rival 110 (1038:1729)
- SteelSeries Rival 300 (1038:1710)
- SteelSeries Rival 300 CS:GO Fade Edition (1038:1394)
- SteelSeries Rival 300 CS:GO Hyperbeast Edition (1038:171a)
- SteelSeries Rival 300 HP Omen Edition (1038:1718)
- SteelSeries Heroes of the Storm (Sensei Raw) (1038:1390)
Experimental support:
- SteelSeries Rival 310 (1038:1720)
- SteelSeries Rival 500 (1038:170e)
- SteelSeries Rival 600 (1038:1724)
If you have trouble running this software, please open an issue on Github:
- Any Linux distribution that use
udev(Debian, Ubuntu, ArchLinux, Fedora,...) or Windows - hidapi
Linux:
Installation require a compilation toolchain and python headers to compile
hidapi. On Debian / Ubuntu, this can be installed with the following command
(as root):
apt-get install build-essential python-dev libusb-1.0-0-dev libudev-dev
Windows:
On Windows, you have to install first:
- Python 3.6 or 2.7: https://www.python.org/
- Visual C++ 2015 Build Tools: http://landinghub.visualstudio.com/visual-cpp-build-tools
Run the following command (as root):
pip install rivalcfg
Clone the repositiory:
git clone https://github.com/flozz/rivalcfg.git
cd rivalcfg
Install rivalcfg (as root):
pip install .
NOTE: udev rules should be automatically installed, but if setup fails, you
should copy the rules manually: cp rivalcfg/data/99-steelseries-rival.rules /etc/udev/rules.d/ and then run the udevadm trigger command.
Use package rivalcfg-git
Usage: rivalcfg [options]
Main Options:
--version show program's version number and exit
-h, --help show this help message and exit
-l, --list print compatible mice and exit
SteelSeries Rival and Rival 300 Options:
-c LOGO_COLOR, --logo-color=LOGO_COLOR
Set the logo backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF1800)
-e LOGO_LIGHT_EFFECT, --logo-light-effect=LOGO_LIGHT_EFFECT
Set the logo light effect (values: 1, 2, 3, 4, breath,
steady, default: steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
Set polling rate in Hz (values: 125, 250, 500, 1000,
default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (from 50 to 6500 in
increments of 50, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (from 50 to 6500 in
increments of 50, default: 1600)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
Set the wheel backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF1800)
-E WHEEL_LIGHT_EFFECT, --wheel-light-effect=WHEEL_LIGHT_EFFECT
Set the wheel light effect (values: 1, 2, 3, 4,
breath, steady, default: steady)
-r, --reset Reset all options to their factory values
SteelSeries Rival 100 Options:
-b BTN6_ACTION, --btn6-action=BTN6_ACTION
Set the action of the button under the wheel (values:
default, os, default: default)
-c COLOR, --color=COLOR
Set the mouse backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #00FFFF)
-e LIGHT_EFFECT, --light-effect=LIGHT_EFFECT
Set the light effect (values: 1, 2, 3, 4, breath,
steady, default: steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
Set polling rate in Hz (values: 125, 250, 500, 1000,
default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (values: 250, 500, 1000,
1250, 1500, 1750, 2000, 4000, default: 1000)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (values: 250, 500, 1000,
1250, 1500, 1750, 2000, 4000, default: 2000)
-r, --reset Reset all options to their factory values
SteelSeries Rival 110 Options:
-b BTN6_ACTION, --btn6-action=BTN6_ACTION
Set the action of the button under the wheel (values:
default, os, default: default)
-c COLOR, --color=COLOR
Set the mouse backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #00FFFF)
-e LIGHT_EFFECT, --light-effect=LIGHT_EFFECT
Set the light effect (values: steady, breath, 1, 2, 3,
4, default: steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
Set polling rate in Hz (values: 125, 250, 500, 1000,
default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (values: 200, 300, 400, 500,
600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400,
1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300,
2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, 3200,
3300, 3400, 3500, 3600, 3700, 3800, 3900, 4000, 4100,
4200, 4300, 4400, 4500, 4600, 4700, 4800, 4900, 5000,
5100, 5200, 5300, 5400, 5500, 5600, 5700, 5800, 5900,
6000, 6100, 6200, 6300, 6400, 6500, 6600, 6700, 6800,
6900, 7000, 7100, 7200, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (values: 200, 300, 400, 500,
600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400,
1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300,
2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, 3200,
3300, 3400, 3500, 3600, 3700, 3800, 3900, 4000, 4100,
4200, 4300, 4400, 4500, 4600, 4700, 4800, 4900, 5000,
5100, 5200, 5300, 5400, 5500, 5600, 5700, 5800, 5900,
6000, 6100, 6200, 6300, 6400, 6500, 6600, 6700, 6800,
6900, 7000, 7100, 7200, default: 1600)
-r, --reset Reset all options to their factory values
SteelSeries Rival 300 CS:GO Fade Edition Options:
-b BTN6_ACTION, --btn6-action=BTN6_ACTION
Set the action of the button under the wheel (values:
default, os, default: default)
-c LOGO_COLOR, --logo-color=LOGO_COLOR
Set the logo backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF5200)
-e LOGO_LIGHT_EFFECT, --logo-light-effect=LOGO_LIGHT_EFFECT
Set the logo light effect (values: breathfast,
breathmed, breathslow, steady, 1, 2, 3, 4, default:
steady)
-p POLLING_RATE, --polling-rate=POLLING_RATE
Set polling rate in Hz (values: 125, 250, 500, 1000,
default: 1000)
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (from 50 to 6500 in
increments of 50, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (from 50 to 6500 in
increments of 50, default: 1600)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
Set the wheel backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF5200)
-E WHEEL_LIGHT_EFFECT, --wheel-light-effect=WHEEL_LIGHT_EFFECT
Set the wheel light effect (values: breathfast,
breathmed, breathslow, steady, 1, 2, 3, 4, default:
steady)
-r, --reset Reset all options to their factory values
SteelSeries Rival 310 Options (Experimental):
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (from 100 to 12000 in
increments of 100, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (from 100 to 12000 in
increments of 100, default: 1600)
SteelSeries Rival 500 Options (Experimental):
-c LOGO_COLOR, --logo-color=LOGO_COLOR
Set the logo backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF1800)
-t COLOR1 COLOR2 SPEED, --logo-colorshift=COLOR1 COLOR2 SPEED
Set the logo backlight color (e.g. red aqua 200,
ff0000 00ffff 200, default: #FF1800 #FF1800 200)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
Set the wheel backlight color (e.g. red, #ff0000,
ff0000, #f00, f00, default: #FF1800)
-T COLOR1 COLOR2 SPEED, --wheel-colorshift=COLOR1 COLOR2 SPEED
Set the wheel backlight color (e.g. red aqua 200,
ff0000 00ffff 200, default: #FF1800 #FF1800 200)
-r, --reset Reset all options to their factory values
SteelSeries Rival 600 Options (Experimental):
-2 LEFT_STRIP_BOTTOM_COLOR, --lstrip-bottom-color=LEFT_STRIP_BOTTOM_COLOR
Set the color(s) and effects of the left LED strip
bottom section (e.g. red, #ff0000, ff0000, #f00, f00).
If more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-1 LEFT_STRIP_MID_COLOR, --lstrip-mid-color=LEFT_STRIP_MID_COLOR
Set the color(s) and effects of the left LED strip
middle section (e.g. red, #ff0000, ff0000, #f00, f00).
If more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-0 LEFT_STRIP_TOP_COLOR, --lstrip-top-color=LEFT_STRIP_TOP_COLOR
Set the color(s) and effects of the left LED strip
upper section (e.g. red, #ff0000, ff0000, #f00, f00).
If more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-c LOGO_COLOR, --logo-color=LOGO_COLOR
Set the logo backlight color(s) and effects (e.g. red,
#ff0000, ff0000, #f00, f00). If more than one value is
specified, a color shifting effect is set (e.g.
x,x,red,0,green,54,blue,54) syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-p POLLING_RATE, --polling-rate=POLLING_RATE
Set polling rate in Hz (values: 125, 250, 500, 1000,
default: 1000)
-5 RIGHT_STRIP_BOTTOM_COLOR, --rstrip-bottom-color=RIGHT_STRIP_BOTTOM_COLOR
Set the color(s) and effects of the right LED strip
bottom section (e.g. red, #ff0000, ff0000, #f00, f00).
If more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-4 RIGHT_STRIP_MID_COLOR, --rstrip-mid-color=RIGHT_STRIP_MID_COLOR
Set the color(s) and effects of the right LED strip
mid section (e.g. red, #ff0000, ff0000, #f00, f00). If
more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-3 RIGHT_STRIP_TOP_COLOR, --rstrip-top-color=RIGHT_STRIP_TOP_COLOR
Set the color(s) and effects of the right LED strip
upper section (e.g. red, #ff0000, ff0000, #f00, f00).
If more than one value is specified, a color shifting
effect is set (e.g. x,x,red,0,green,54,blue,54)
syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-s SENSITIVITY1, --sensitivity1=SENSITIVITY1
Set sensitivity preset 1 (from 100 to 12000 in
increments of 100, default: 800)
-S SENSITIVITY2, --sensitivity2=SENSITIVITY2
Set sensitivity preset 2 (from 100 to 12000 in
increments of 100, default: 1600)
-C WHEEL_COLOR, --wheel-color=WHEEL_COLOR
Set the wheel backlight color(s) and effects (e.g.
red, #ff0000, ff0000, #f00, f00). If more than one
value is specified, a color shifting effect is set
(e.g. x,x,red,0,green,54,blue,54) syntax:
time(ms),trigger_mask,color1,pos1,...,colorn,posn
-r, --reset Reset all options to their factory values
Lights are configured via RGB color, so to have a lower brightness, just set a darker color (e.g. #880000 instead of #FF0000 for a darker red).
You can turn the lights off by setting the black color to the lights.
Example with Rival 100:
rivalcfg --color=black
Example with Rival, Rival 300:
rivalcfg --logo-color=black --wheel-color=black
If you have an error like
IOError: [Errno 13] Permission denied: u'/dev/hidrawXX'
this means that the udev rules have not been installed with the software. This can be fixed using the following commands (as root):
wget https://raw.githubusercontent.com/flozz/rivalcfg/master/rivalcfg/data/99-steelseries-rival.rules -O /etc/udev/rules.d/99-steelseries-rival.rules
sudo udevadm trigger
Rivalcfg uses several environment variable to enable different debug features:
-
RIVALCFG_DEBUG=1: Enable debug. Setting this variable will allow rivalcfg to write debug information to stdout. -
RIVALCFG_DRY=1Enable dry run. Setting this variable will avoid rivalcfg to write anything to a real device plugged to the computer (i any). It will instead simulate the device, so it can be used to make test on mice that are not plugged to the computer if used in conjunction to theRIVALCFG_PROFILEvariable. -
RIVALCFG_PROFILE=<VendorID>:<ProductID>: Forces rivalcfg to load the corresponding profile instead of the one of the plugged device (if any). -
RIVALCFG_DEVICE=<VendorID>:<ProductID>: Forces rivalcfg to write bytes to this device, even if it is not matching the selected profile.
Example: debug logging only:
$ RIVALCFG_DEBUG=1 rivalcfg --list
Example: dry run on Rival 300 profile:
$ RIVALCFG_DRY=1 RIVALCFG_PROFILE=1038:1710 rivalcfg -c ff1800
Example: using Rival 300 command set on Rival 300 CS:GO Fade Editon mouse:
$ RIVALCFG_PROFILE=1038:1710 RIVALCFG_DEVICE=1038:1394 rivalcfg -c ff1800
# ↑ selects "Rival 300" profile ↑ but write on the "Rival 300 CS:GO Fade Edition" device
Example debug output:
[DEBUG] Rivalcfg 2.5.3
[DEBUG] Python version: 2.7.13
[DEBUG] OS: Linux
[DEBUG] Linux distribution: Ubuntu 17.04 zesty
[DEBUG] Dry run enabled
[DEBUG] Forced profile: 1038:1710
[DEBUG] Targeted device: 1038:1710
[DEBUG] Selected mouse: <Mouse SteelSeries Rival 300 (1038:1710:00)>
[DEBUG] Mouse._device_write: 00 08 01 FF 18 00
[DEBUG] Mouse._device_write: 00 09 00
- 3.0.0:
- Adds support of the Rival 300 HP Omen Edition (#52, @FadedCoder)
- Adds experimental support of the Rival 600 (#60, @ergor)
- Varous fixes
- 3.0.0-beta1:
- Support of the Rival 110
- Support of the Heroes of the Storm (Sensei Raw)
- Partial support of the Rival 310
- Partial support of the Rival 500
- Microsoft Windows (and Mac OS?) support
- rivalcfg now uses the
hidapilib instead of manipulating udev directly - Code refactored (almost all API changed)
- Various bug fixes
- 2.6.0: Add CS:GO Hyperbeast Edition support (thanks @chriscoyfish, #33)
- 2.5.3: Minor typo fixes for cli (thanks @chriscoyfish, #31)
- 2.5.2: Fixes Rival 300 with updated firmware not working (#5, #25, #28, special thanks to @Thiblizz)
- 2.5.1: Fixes mouse not recognized on system with more than 10 USB busses (#21)
- 2.5.0: Rival 300 CS:GO Fade Edition support (thanks @Percinnamon, #20)
- 2.4.4: Improves debug options
- 2.4.3: Fixes an issue with Python 3 (#8)
- 2.4.2: Fixes a TypeError with Python 3 (#7)
- 2.4.1: Help improved
- 2.4.0: Python 3 support (#4)
- 2.3.0:
- Rival and Rival 300 support is no more experimental
- Improves the device listing (--list)
- Fixes bug with color parsing in CLI (#1)
- Fixes unrecognized devices path on old kernel (#2)
- 2.2.0: Experimental Rival 300 support
- 2.1.1: Includes udev rules in the package and automatically install the rules (if possible)
- 2.1.0: Experimental Original Rival support
- 2.0.0: Refactored to support multiple mice
- 1.0.1: Fixes the pypi package
- 1.0.0: Initial release