ACD-SMAP-MIB.mib

--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2008, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


ACD-SMAP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Unsigned32
        FROM SNMPv2-SMI
    DisplayString, TruthValue, RowStatus
        FROM SNMPv2-TC
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF

    acdMibs
        FROM ACCEDIAN-SMI;

acdSmap MODULE-IDENTITY

    LAST-UPDATED "201305110100Z"
    ORGANIZATION "Accedian Networks, Inc."
    CONTACT-INFO
            "Accedian Technical Assistance Center
             Accedian Networks, Inc.
             2351 Alfred-Nobel blvd., Suite N-410
             Saint-Laurent, Quebec Canada H4S 2A9
             E-mail: support@accedian.com"
    DESCRIPTION
            "The Service mapping database for this Accedian Networks device."

    REVISION "201305110100Z"        -- 11 April 2013
    DESCRIPTION
            "Add port cos mapping tables."

    REVISION "200810010100Z"        -- 1 October 2008
    DESCRIPTION
            "Definition revision."

    REVISION "200806150100Z"        -- 15 June 2008
    DESCRIPTION
            "Initial version of MIB module ACD-SMAP-MIB."

    ::= { acdMibs 8 }

acdSmapNotifications    OBJECT IDENTIFIER ::= { acdSmap 0 }
acdSmapMIBObjects       OBJECT IDENTIFIER ::= { acdSmap 1 }
acdSmapConformance      OBJECT IDENTIFIER ::= { acdSmap 2 }

acdSmapConfig           OBJECT IDENTIFIER ::= { acdSmapMIBObjects 1 }

---------------------------------------------------------------------------
 -- The CoS Profile configuration table
 -- This table contains all CoS Profile entry configurations.
---------------------------------------------------------------------------

acdSmapCoSProfTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapCoSProfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The CoS profile table. Each row in the table represents a CoS Profile.
         A CoS profile is used to map an input packet to an L2 class of service.
         This traffic mapping (classification) is accomplished using one of
         the following fields in the incoming packet:

         p-bits in 802.1Q / 802.1Q-in-Q tags
         IP precedence bits in IPv4 TOS byte
         DSCP bits in IPv4 DSCP byte

         The class of service value (0-7) assigned to the outgoing traffic is
         selected based on the conformance level (Green/Yellow) of the incoming
         traffic. The following sections describe the general configuration
         parameters and the mapping table of a CoS profile."
    ::= { acdSmapConfig 1 }

acdSmapCoSProfEntry OBJECT-TYPE
    SYNTAX      AcdSmapCoSProfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings to manage a CoS profile."
    INDEX   { acdSmapCoSProfID }
    ::=  { acdSmapCoSProfTable 1 }

AcdSmapCoSProfEntry ::= SEQUENCE {
    acdSmapCoSProfID                    Unsigned32,
    acdSmapCoSProfRowStatus             RowStatus,
    acdSmapCoSProfName                  DisplayString,
    acdSmapCoSProfType                  INTEGER,
    acdSmapCoSProfDecodeDropBit         TruthValue,
    acdSmapCoSProfEncodeDropBit         TruthValue
}

acdSmapCoSProfID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each CoS Profile instance."
    ::= { acdSmapCoSProfEntry 1 }

acdSmapCoSProfRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new CoS Profile you shall provide the a unique name and the
        type for an empty row with the RowStatus set to Create and Go. To
        delete the CoS Profile you need to set the RowStatus to destroy."
    ::= { acdSmapCoSProfEntry 2 }

acdSmapCoSProfName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to uniquely identify the CoS profile."
    ::= { acdSmapCoSProfEntry 3 }

acdSmapCoSProfType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    pcp(1),
                    dscp(2),
                    pre(3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the type of CoS profile. Possible values are:  PCP, IP
         precedence or DSCP."
    ::= { acdSmapCoSProfEntry 4 }

acdSmapCoSProfDecodeDropBit  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This field is only valid for PCP CoS profiles. If this field is set,
         the pre-marking color is decoded from the DEI bit (Drop Eligible
         Indication). Otherwise, the user defined pre-color is used."
    DEFVAL      { false }
    ::= { acdSmapCoSProfEntry 5 }

acdSmapCoSProfEncodeDropBit  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This field controls the DEI bit in an S-VLAN tag. If this field is set
         and the outgoing packet is marked yellow then the DEI bit is set to 1.
         Otherwise, the DEI is set to 0."
    DEFVAL      { false }
    ::= { acdSmapCoSProfEntry 6 }

---------------------------------------------------------------------------
 -- The CoS Profile Code Point configuration table
 -- This table contains all Code Point for a CoS profile entry.
---------------------------------------------------------------------------

acdSmapCoSProfCodePointTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapCoSProfCodePointEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Configuration table of all code point entries. Each row in the
         table represents a Code point. the number of code points depend of the
         acdSmapCoSProfType value.

         p-bits in 802.1Q / 802.1Q-in-Q tags
         IP precedence bits in IPv4 TOS byte
         DSCP bits in IPv4 DSCP byte

         The class of service value (0-7) assigned to the outgoing traffic is
         selected based on the conformance level (Green/Yellow) of the incoming
         traffic."
    ::= { acdSmapConfig 2 }

acdSmapCoSProfCodePointEntry OBJECT-TYPE
    SYNTAX      AcdSmapCoSProfCodePointEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings for a code point."
    INDEX   { acdSmapCoSProfID, acdSmapCoSProfCodePointID }
    ::=  { acdSmapCoSProfCodePointTable 1 }

AcdSmapCoSProfCodePointEntry ::= SEQUENCE {
    acdSmapCoSProfCodePointID               Unsigned32,
    acdSmapCoSProfCodePointPreMarkingColor  INTEGER,
    acdSmapCoSProfCodePointGreenOut         Unsigned32,
    acdSmapCoSProfCodePointYellowOut        Unsigned32
}

acdSmapCoSProfCodePointID  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..63)
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each row. Base on Code Point, 0 to 63 for DSCP or 0
         to 7 for PCP or IP precedence."
    ::= { acdSmapCoSProfCodePointEntry 1 }

acdSmapCoSProfCodePointPreMarkingColor  OBJECT-TYPE
    SYNTAX      INTEGER {
                    green(1),
                    yellow(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This is the user pre-color to mark the incoming traffic. This field
         is only valid if acdSmapCoSProfDecodeDropBit is not set."
    DEFVAL      { green }
    ::= { acdSmapCoSProfCodePointEntry 2 }

acdSmapCoSProfCodePointGreenOut  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The class of service value that will be used in the outgoing green
         packets. This value is selected if the result of the bandwidth
         regulator assigned to this entry is green or if the pre-marking
         color is green and no bandwidth regulator is assigned to this entry."
    DEFVAL      { 0 }
    ::= { acdSmapCoSProfCodePointEntry 3 }

acdSmapCoSProfCodePointYellowOut  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The class of service value that will be used in the outgoing yellow
         packets. This value is selected if the result of the bandwidth
         regulator assigned to this entry is yellow or if the pre-marking
         color is yellow and no bandwidth regulator is assigned to this entry."
    DEFVAL      { 0 }
    ::= { acdSmapCoSProfCodePointEntry 4 }

---------------------------------------------------------------------------
 -- The Regulator Set configuration table
 -- This table contains all Regulator Set entry configurations.
---------------------------------------------------------------------------

acdSmapRegSetTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapRegSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Regulator Set profile table. Each row in the table represents a
         Regulator Set. A bandwidth regulator set allows the user to regulate
         traffic based on the following information:

         p-bits in 802.1Q / 802.1Q-in-Q tags
         IP precedence bits in IPv4 TOS byte
         DSCP bits in IPv4 DSCP byte.
        "
    ::= { acdSmapConfig 3 }

acdSmapRegSetEntry OBJECT-TYPE
    SYNTAX      AcdSmapRegSetEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings to manage a Regulator set."
    INDEX   { acdSmapRegSetID }
    ::=  { acdSmapRegSetTable 1 }

AcdSmapRegSetEntry ::= SEQUENCE {
    acdSmapRegSetID                 Unsigned32,
    acdSmapRegSetRowStatus          RowStatus,
    acdSmapRegSetName               DisplayString,
    acdSmapRegSetType               INTEGER
}

acdSmapRegSetID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each Regulator set instance."
    ::= { acdSmapRegSetEntry 1 }

acdSmapRegSetRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
       "All columns must have a valid value before a row can be activated. To
        create a new Regulator set you shall provide the a unique name and the
        type for an empty row with the RowStatus set to Create and Go. To
        delete the CoS Profile you need to set the RowStatus to destroy."
    ::= { acdSmapRegSetEntry 2 }

acdSmapRegSetName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (1..31))
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "This is a string to uniquely identify the Regulator set."
    ::= { acdSmapRegSetEntry 3 }

acdSmapRegSetType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    pcp(1),
                    dscp(2),
                    pre(3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Indicates the type of Regulator Set. Possible values are:  PCP, IP
         precedence or DSCP."
    ::= { acdSmapRegSetEntry 4 }

---------------------------------------------------------------------------
 -- The Regulator Set Code Point configuration table
 -- This table contains all Code Point for a Regulator set profile entry.
---------------------------------------------------------------------------

acdSmapRegSetCodePointTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapRegSetCodePointEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The Configuration table of all code point entries. Each row in the
         table represents a Code point. the number of code points depend of the
         acdSmapCoSProfType value.

         p-bits in 802.1Q / 802.1Q-in-Q tags;
         IP precedence bits in IPv4 TOS byte;
         DSCP bits in IPv4 DSCP byte.
         "
    ::= { acdSmapConfig 4 }

acdSmapRegSetCodePointEntry OBJECT-TYPE
    SYNTAX      AcdSmapRegSetCodePointEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings for a code point."
    INDEX   { acdSmapRegSetID, acdSmapRegSetCodePointID }
    ::=  { acdSmapRegSetCodePointTable 1 }

AcdSmapRegSetCodePointEntry ::= SEQUENCE {
    acdSmapRegSetCodePointID                Unsigned32,
    acdSmapRegSetCodePointRegulatorID       Unsigned32,
    acdSmapRegSetCodePointRegulatorEnable   TruthValue
}

acdSmapRegSetCodePointID  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..63)
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each row. Base on Code Point, 0 to 64 for DSCP or 0
         to 7 for PCP or IP precedence."
    ::= { acdSmapRegSetCodePointEntry 1 }


acdSmapRegSetCodePointRegulatorID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The bandwidth regulator that will be used to regulate the traffic flow
         that has this PCP/IP precendence/DSCP value. Refer to acdRegulatorTable 
         to find the exact identifier (same as acdRegulatorID)."
    DEFVAL      { 0 }
    ::= { acdSmapRegSetCodePointEntry 2 }

acdSmapRegSetCodePointRegulatorEnable  OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Enable or disable traffic regulation for this  PCP, IP precedence or
         DSCP value."
    DEFVAL      { false }
    ::= { acdSmapRegSetCodePointEntry 3 }

---------------------------------------------------------------------------
 -- The Port CoS to encode DEI enable configuration table
---------------------------------------------------------------------------

acdSmapPortCoSEncodeDeiTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapPortCoSEncodeDeiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "TBD"
    ::= { acdSmapConfig 5 }

acdSmapPortCoSEncodeDeiEntry OBJECT-TYPE
    SYNTAX      AcdSmapPortCoSEncodeDeiEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings for a code point."
    INDEX   { acdSmapPortCoSPortID }
    ::=  { acdSmapPortCoSEncodeDeiTable 1 }

AcdSmapPortCoSEncodeDeiEntry ::= SEQUENCE {
    acdSmapPortCoSPortID              Unsigned32,
    acdSmapPortCoSEncodeDeiEnable     INTEGER
}

acdSmapPortCoSPortID  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Unique value for each row. Based on port number."
    ::= { acdSmapPortCoSEncodeDeiEntry 1 }

acdSmapPortCoSEncodeDeiEnable  OBJECT-TYPE
    SYNTAX      INTEGER {
                    enable(0),
                    disable(1)
                }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Entry to enable/disable encode DEI on a port."
    ::= { acdSmapPortCoSEncodeDeiEntry 2 }

---------------------------------------------------------------------------
 -- The Port CoS to Pcp mapping configuration table
 -- This table contains all Code Point for a CoS profile entry.
---------------------------------------------------------------------------

acdSmapPortCoSMapTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF AcdSmapPortCoSMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "TBD"
    ::= { acdSmapConfig 6 }

acdSmapPortCoSMapEntry OBJECT-TYPE
    SYNTAX      AcdSmapPortCoSMapEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry consisting of all settings for a code point."
    INDEX   { acdSmapPortCoSPortID, acdSmapPortCoSMapID }
    ::=  { acdSmapPortCoSMapTable 1 }

AcdSmapPortCoSMapEntry ::= SEQUENCE {
    acdSmapPortCoSMapID            Unsigned32,
    acdSmapPortCoSMapCosIn         Unsigned32,
    acdSmapPortCoSMapGreenOut      Unsigned32,
    acdSmapPortCoSMapYellowOut     Unsigned32
}

acdSmapPortCoSMapID  OBJECT-TYPE
    SYNTAX      Unsigned32 (1..8)
    MAX-ACCESS not-accessible
    STATUS      current
    DESCRIPTION
        "A unique value based on CoS value."
    ::= { acdSmapPortCoSMapEntry 1 }

acdSmapPortCoSMapCosIn  OBJECT-TYPE
    SYNTAX      Unsigned32  (0..7)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The CoS value for this entry."
    ::= { acdSmapPortCoSMapEntry 2 }

acdSmapPortCoSMapGreenOut  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Priority code Point value that will be used in the outgoing green
         packets. This value is selected if the result of the bandwidth
         regulator assigned to this entry is green or if the pre-marking
         color is green and no bandwidth regulator is assigned to this entry."
    ::= { acdSmapPortCoSMapEntry 3 }

acdSmapPortCoSMapYellowOut  OBJECT-TYPE
    SYNTAX      Unsigned32 (0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The Priority code Point value that will be used in the outgoing yellow
         packets. This value is selected if the result of the bandwidth
         regulator assigned to this entry is yellow or if the pre-marking
         color is yellow and no bandwidth regulator is assigned to this entry."
    ::= { acdSmapPortCoSMapEntry 4 }

---------------------------------------------------------------------------
 -- ACD-SMAP-MIB Module - Conformance Information
---------------------------------------------------------------------------

acdSmapCompliances  OBJECT IDENTIFIER ::= { acdSmapConformance 1 }
acdSmapGroups       OBJECT IDENTIFIER ::= { acdSmapConformance 2 }

---------------------------------------------------------------------------
 -- Units of conformance
---------------------------------------------------------------------------

acdSmapCoSProfGroup OBJECT-GROUP
    OBJECTS {
        acdSmapCoSProfRowStatus,
        acdSmapCoSProfName,
        acdSmapCoSProfType,
        acdSmapCoSProfDecodeDropBit,
        acdSmapCoSProfEncodeDropBit
    }
    STATUS      current
    DESCRIPTION
       "Objects for the CoS profile Group."
    ::= { acdSmapGroups 1 }

acdSmapCoSProfCodePointGroup OBJECT-GROUP
    OBJECTS {
        acdSmapCoSProfCodePointPreMarkingColor,
        acdSmapCoSProfCodePointGreenOut,
        acdSmapCoSProfCodePointYellowOut
    }
    STATUS      current
    DESCRIPTION
       "Objects for the CoS profile CodePoint Group."
    ::= { acdSmapGroups 2 }

acdSmapRegSetGroup OBJECT-GROUP
    OBJECTS {
        acdSmapRegSetRowStatus,
        acdSmapRegSetName,
        acdSmapRegSetType
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Regulator Set Group."
    ::= { acdSmapGroups 3 }

acdSmapRegSetCodePointGroup OBJECT-GROUP
    OBJECTS {
        acdSmapRegSetCodePointRegulatorID,
        acdSmapRegSetCodePointRegulatorEnable
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Regulator Set CodePoint Group."
    ::= { acdSmapGroups 4 }

acdSmapPortCoSEncodeDeiGroup OBJECT-GROUP
    OBJECTS {
        acdSmapPortCoSEncodeDeiEnable
    }
    STATUS      current
    DESCRIPTION
       "Objects for the Port CoS Map DIE enable Group."
    ::= { acdSmapGroups 5 }

acdSmapPortCoSMapGroup OBJECT-GROUP
    OBJECTS {
        acdSmapPortCoSMapCosIn,
        acdSmapPortCoSMapGreenOut,
        acdSmapPortCoSMapYellowOut
    }
    STATUS      current
    DESCRIPTION
       "Objects for the CoS profile CodePoint Group."
    ::= { acdSmapGroups 6 }

   
acdSmapCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
       "The compliance statement for support of the ACD-SMAP-MIB module."
    MODULE
        MANDATORY-GROUPS {
            acdSmapCoSProfGroup,
            acdSmapCoSProfCodePointGroup,
            acdSmapRegSetGroup,
            acdSmapRegSetCodePointGroup,
            acdSmapPortCoSEncodeDeiGroup,
            acdSmapPortCoSMapGroup
         }


    OBJECT  acdSmapCoSProfRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    OBJECT  acdSmapRegSetRowStatus
      SYNTAX       RowStatus { active(1) }
      WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
      DESCRIPTION "Support for createAndWait is not required."

    ::= { acdSmapCompliances 1 }

END