16.0.0 RC3: Typo in overlay of "Reference Image and Camera Settings"

[dandjo]

The Problem

"Device is busy, plase waiting..." is a bit of an accident. :-)

Version

16.0.0-RC3 (Commit: a0333d9+)

Logfile

[0d00h00m00s] 2024-10-05T21:20:40 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-10-05T21:20:40 <INF> [MAIN] ==================== Start ======================
[0d00h00m00s] 2024-10-05T21:20:40 <INF> [MAIN] =================================================
[0d00h00m00s] 2024-10-05T21:20:40 <INF> [MAIN] PSRAM size: 8388608 byte (8MB / 64MBit)
[0d00h00m00s] 2024-10-05T21:20:40 <INF> [MAIN] Total heap: 4382779 byte
[0d00h00m02s] 2024-10-05T21:20:42 <INF> [MAIN] Camera info: PID: 0x26, VER: 0x42, MIDL: 0x7f, MIDH: 0xa2
[0d00h00m02s] 2024-10-05T21:20:42 <INF> [SDCARD] Basic R/W check started...
[0d00h00m02s] 2024-10-05T21:20:42 <INF> [SDCARD] Basic R/W check successful
[0d00h00m02s] 2024-10-05T21:20:42 <INF> [SNTP] TimeServer not defined, using default: pool.ntp.org
[0d00h00m02s] 2024-10-05T21:20:42 <INF> [SNTP] Configuring NTP Client...
[0d00h00m02s] 2024-10-05T23:20:42 <INF> [SNTP] Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
[0d00h00m02s] 2024-10-05T23:20:42 <INF> [SNTP] time zone: +0200 Delta to UTC: 7200 seconds
[0d00h00m02s] 2024-10-05T23:20:42 <INF> [SNTP] Time is already set: 2024-10-05 23:20:42
[0d00h00m02s] 2024-10-05T23:20:42 <INF> [MAIN] CPU frequency: 240 MHz
[0d00h00m02s] 2024-10-05T23:20:43 <INF> [SDCARD] Folder/file presence check started...
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [SDCARD] Folder/file presence check successful
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [MAIN] Tag: 'v16.0.0-RC3', Release: v16.0.0-RC3 (Commit: a0333d9+), Date/Time: 2024-10-05 21:10, Web UI: Release: v16.0.0-RC3 (Commit: a0333d9+)
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [MAIN] Reset reason: Via esp_restart
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WLANINI] SSID: luftnetz-domotics
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WLANINI] Password: XXXXXXXX
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WLANINI] Hostname: water-meter
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WLANINI] RSSIThreshold: -75
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [MAIN] WLAN config loaded, init WIFI...
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WIFI] Automatic interface config --> Use DHCP service
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WIFI] Set hostname to: water-meter
[0d00h00m03s] 2024-10-05T23:20:43 <INF> [WIFI] Init successful
[0d00h00m05s] 2024-10-05T23:20:46 <INF> [WIFI] Connected to: luftnetz-domotics, RSSI: -60
[0d00h00m06s] 2024-10-05T23:20:47 <INF> [WIFI] Assigned IP: 10.3.0.19
[0d00h00m07s] 2024-10-05T23:20:47 <INF> [SNTP] Time is synced with NTP Server pool.ntp.org: 2024-10-05 23:20:47
[0d00h00m09s] 2024-10-05T23:20:49 <INF> [MAIN] Device info: CPU cores: 2, Chip revision: 301
[0d00h00m09s] 2024-10-05T23:20:49 <INF> [MAIN] SD card info: Name: SD32G, Capacity: 30436MB, Free: 30405MB
[0d00h00m11s] 2024-10-05T23:20:51 <INF> [MAIN] Initialization completed successfully
[0d00h00m13s] 2024-10-05T23:20:54 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m13s] 2024-10-05T23:20:54 <INF> [TFLITE] Trying to load the model. If it crashes here, it ist most likely due to a corrupted model!
[0d00h00m13s] 2024-10-05T23:20:54 <INF> [LOGFILE] Set log level to ERROR

Screenshots

[caco3]

Thanks!
Fixed in #3309