-
Notifications
You must be signed in to change notification settings - Fork 654
This issue was moved to a discussion.
You can continue the conversation there. Go to discussion →
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Ersteinrichtung unter v15.4.0 krass langsam #2797
Comments
Same Problem |
I had the same issue. Tried to switch SD card without any effect. Found that it worked well, slow but reliant when the ESP switched to another hotspot that was further away (RSSI -85ish). I started to compare both hotspots (AVM with Mesh enabled) and found that it started to work perfectly when I changed the Wi-Fi channel of the hotspot that was sitting next to the ESP to 1. The same goes for channel 6. I had this hotspot on channel 7 before. When I switch back to 7, it is slow as before (as described in the first post). TLDR: Problem solved for me by setting the Wi-Fi channel to 1 or 6 on the hotspot, the device connects to. |
Hi |
Interesting! Now that I have also set a fixed channel (previously auto-mode), it actually works better. Thanks for this tip. |
Maybe the device does just work better with "standard" channels 1,6 and 11. At least that is my observation. |
I had the same issue, this "fixed" it for me. |
This issue was moved to a discussion.
You can continue the conversation there. Go to discussion →
The Problem
Ich habe derzeit 3 Systeme unter v15.4.0 in Betrieb. Zwei davon habe ich nun per Ersteinrichtung (per Web Installer und blanker SD-KArte) neu eingerichtet. Das war extrem schwierig, weil der Seitenaufbau extrem langsam war. Extrem bedeutet, dass der Seitenwechsel jeweils viele Minuten dauert.
Bis ich verstanden habe, dass man hier nach Klick auf "next" bis zu über 30 Minuten warten muß, habe ich die Ersteinrichtung x-mal neu gestartet und Schaltungsfehler gesucht.
Nachdem ich kapiert habe, länger zu warten, lief bei beiden Systemen die Ersteinrichtung schließlich (nach insgesamt Stunden) durch. Der eigentliche Betrieb danach läuft dann wiederum fast normal.
Mein Eindruck: das hat irgendetwas mit dem Datenaustausch mit der SD-Karte zu tun. Dies vermute ich, weil der statische Teil der Seiten schnell da ist und man auf dem dynamischen Teil (Fotos, Daten) eben lange warten muß. Ein mehrfacher SD-Kartentausch änderte an dem Problem aber nichts.
Version
v15.4.0 (Commit: 74d4f20)
Logfile
Expected Behavior
schneller Seitenaufbau auch nach Einrichten des Systems
Screenshots
Additional Context
No response
The text was updated successfully, but these errors were encountered: