-
|
Hey! I just switched from AVM Fritz products to UniFi. I also changed the network to 192.168.1.0/24. All devices got there new IP address except ESP32. A few reboots doesn't helped and also assigning a static IP in UniFi doesn't work. In UniFi the ESP32 is shown with its old IP address. How can I adjust this? Thanks |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 1 reply
-
|
Are you sure the device was configured to use DHCP? Note: this file is for security reasons not accessible through the Web UI, so you must take the sd card out and put it into a PC to read/edit it! |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, this was the solution |
Beta Was this translation helpful? Give feedback.
Are you sure the device was configured to use DHCP?
You can check the content of the
wlan.inifile on the sd card, see https://github.com/jomjol/AI-on-the-edge-device/blob/rolling/sd-card/wlan.ini#L17-20Note: this file is for security reasons not accessible through the Web UI, so you must take the sd card out and put it into a PC to read/edit it!