Onboard LED not working #3181
-
|
I have two systems running (hot water and cold water) cold water system is running perfect. |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment 12 replies
-
|
I would say that if both systems are running with the same firmware and the same settings, your onboard flash LED will probably be broken. |
Beta Was this translation helpful? Give feedback.
-
|
I did all measurements. For S8050 same results. I can't believe that I have 3 new non-functional boards. :-( |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
On both systems it looks like this: |
Beta Was this translation helpful? Give feedback.
-
|
if the onboard flash led is used, the option "GPIO" should not be activated.
You could try to measure directly on the ESP32 module to rule out a defect in the conductor track. |
Beta Was this translation helpful? Give feedback.
-
|
All 3 new boards have the same issue :-( |
Beta Was this translation helpful? Give feedback.
-
|
What does the circle mean? |
Beta Was this translation helpful? Give feedback.
-
|
The conductor track is probably broken and he bridged it with the cable. |
Beta Was this translation helpful? Give feedback.
if the onboard flash led is used, the option "GPIO" should not be activated.
You could try to measure directly on the ESP32 module to rule out a defect in the conductor track.