working Hardware Seeed Studio XIAO ESP32S3 Sense ?

[0VV3NZ]

Hi, auf der suche nach ein ESP32 CAM habe ich dieses Modul entdeckt.
Ich wollte gerne von den Profis wissen ob diese Hardware kompatiebel ist.

https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html

Hi, looking for a ESP32 CAM I discovered this module.
I would like to know from the pros if this hardware is compatible.

[caco3]

Ich habe kein ESP32S3 und kann daher nicht sagen, ob es klappt oder nicht.
Die Kamera OV2640 ist grundsätzlich supported.

Und wir haben keinen Code drin, der andere Module explizit verweigern würde.

[dadcoachengineer]

Trying to flash this module with errors.

➜ AI-on-the-edge-device__manual-setup__v15.7.0 esptool.py --chip esp32s3 --port /dev/cu.usbmodem11201 write_flash 0x01000 bootloader.bin 0x08000 partitions.bin 0x10000 firmware.bin
esptool.py v4.7.0
Serial port /dev/cu.usbmodem11201
Connecting...
Chip is ESP32-S3 (QFN56) (revision v0.2)
Features: WiFi, BLE, Embedded PSRAM 8MB (AP_3v3)
Crystal is 40MHz
MAC: dc:da:0c:13:d7:8c
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Unexpected chip id in image. Expected 9 but value was 0. Is this image for a different chip model?

A fatal error occurred: bootloader.bin is not an ESP32-S3 image. Use --force to flash anyway.

[caco3]

I am sure you would have to compile it for the ESP32S3 to have at least a change to have it working.

[SybexX]

https://github.com/Dag0d/AI-on-the-edge-device-ESP32s3/tree/rolling

[caco3]

@Dag0d If your modification works and only requires a different build configuration, then we could add it to our pipeline and also let it automatically be built.

[larryson309]

I tried this, but I get to many errors in platform.IO. I'm at the beginning of any programmer-skills and some of the instructions confused me. So I tried it further.
Thx all of you for your work and time!

[SybexX]

https://github.com/Dag0d/AI-on-the-edge-device-ESP32s3/actions/runs/7960059040

[larryson309]

Hi, are there any Updates? @SybexX @Dag0d

[Dag0d]

I had it running on the Xiao ESP32S3 Sense board but the result was not great, the little board is running way too hot, which even causes crashes from time to time depending on the load and the duration.
my main reason behind that board was the integrated battery controller, which was also a disappointment, as it consumes way too much power. We would have to integrate proper deep sleep and everything.

I'm currently working on a different approach for the battery problem, I designed a ESP32 Cam "Hat" which integrates proper power management with a Mosfet which controls the power to the ESP32Cam.
I´m currently testing this and improving the firmware running on it´s microcontroller.
As soon as all issues are ironed out I will release the schematics and the software.

[larryson309]

Hi, ich versuche ebenfalls, AI-on-the-Edge auf dem Xiao ESP32S3 zum laufen zu bringen, leider ohne Erfolg.
Würde mich freuen, wenn es dann funktioniert.

Hi, I am also trying to get AI-on-the-Edge to run on the Xiao ESP32S3, unfortunately without success.
I would be happy if it works then.
Thanks for you replies.

[SybexX]

momentan leider keine Zeit um daran weiter zu machen, versuche mal die firmware von @Slider0007 :
https://github.com/Slider0007/AI-on-the-edge-device/tree/esp32s3wroom
https://github.com/Slider0007/AI-on-the-edge-device/actions/runs/10407913299