Digits and analog Model cannot be selected.

[New-three]

The Problem

I can't select the model for Digits and Analog in the settings. I also get a message in the browser.
In the selected field the value '/config/ana-cont_11.3.0_s2.tflite' in the section 'Analog' in the field 'Model' is invalid. PLEASE CHECK BEFORE SAVING!

I tried a fresh install. Also a web installation and two SD cards

Version

12.0.1

Logfile

2022-12-02T15:56:04: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2022-12-02T15:56:04: =============================================================================================
2022-12-02T15:56:04: =================================== Main Started ============================================
2022-12-02T15:56:04: =============================================================================================
2022-12-02T15:56:04: Branch: 'HEAD', Tag: 'v12.0.1', Revision: dfe2c46, Date/Time: 2022-09-29 17:13
2022-12-02T16:45:19: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2022-12-02T16:45:19: =============================================================================================
2022-12-02T16:45:19: =================================== Main Started ============================================
2022-12-02T16:45:19: =============================================================================================
2022-12-02T16:45:19: Branch: 'HEAD', Tag: 'v12.0.1', Revision: dfe2c46, Date/Time: 2022-09-29 17:13

Expected Behavior

No response

Screenshots

No response

Additional Context

No response

[jomjol]

Either your /config folder does not contain a tflite / tfl file or you have a mismatch between html version and firmware.

[New-three]

I installed version 12.0.1 via the web installer. Then all files from the source code (zip) of version 12.0.1 copied to the SD card.

[jomjol]

Can you switch to version 13.x?

[caco3]

Most likely a caching issue of your webbrowser!
Try to force-refresh or use another webbrowser

[New-three]

I tried the OTA update 13.0.1 again and now it works.
Many thanks for the replies and great praise for the great project

[svenschedlbauer]

Hello, I have exactly the same problem.
How can I update to 13.0.3? I have already downloaded the update.zip file --> I was able to make the update.
But since that I see no picture in the overview....

[stefanbode]

same problem here after upgrade from 12.0.1 to 13.0.4. Then again additional update then it works partially. The model is back. After that MQTT and Homeassistant also produces error. I assume the default values are the problem. After selecting something from the drop down this is also gone. Remaining problem: Overview page is often empty. The later on no response at all on the ip for 10 minutes. Then it is back. all quite strange. I start from scratch and even here I had to do an update.zip to get back to a more or less working html page. Looks like there is quite a lot messed up now.

[svenschedlbauer]

I have seen now, that I have only updaded the file update.zip, which is not correct.
After I updated first the "firmware.bin" file out of the update.zip folder and second I updated the "update.zip" file it seem to work perfect!
May you made the same mistake. Pls check.

[stefanbode]

Same procedure. First update zip with a mess. Then firmware update. Still not good but better. Then update.zip again. Now even better but as mentioned far from perfekt because of missing connections. Need to investigate.

[svenschedlbauer]

I am really happy with the result. It is now working great together with my home assistant.

[caco3]

Same procedure. First update zip with a mess. Then firmware update. Still not good but better. Then update.zip again.

The update from 12.0.1 is buggy, this is why we clearly note that you should check that the firmware and the Web UI have the correct version. If they mismatch, even a message is shown!

But I agree that during adding all those new functionality, some bits an d pieces got broken. We work hard to fix it all again, please be patient!