PCBWay Audit failure: Requesting to confirm if a 2 or 4 layer board

[aschmeer01]

Very new to this and wanted to try your project.
When ordering the PCB on PCBWay, I received an audit failure and they are requesting to confirm if it is a 2 or 4 layer board.
Unsure what layer to confirm, help needed.
Thanks!

[Kampi]

Hi,
It's a four layer setup. Please make sure that you assign the right layer names to each layer. You can find a screenshot for this step in the production folder.

[aschmeer01]

Thank you!
I see where that is done.

After uploading the Gerber file, the screenshot of the PCB Specification has a different size. Do I need to change the size of 40.9 X 38 to 41.2 X 41.2?
Also, once I change to 4 layer (and add the names of each layer), it changes FR4-TG value to S1000H TG 150 and will not let me change to TG 150-160 (which the screenshot shows). Allow S1000H TG 150?

[Kampi]

Hi,

the PCB dimension isn't that important because PCBway will change it to the right one. I guess the changed the selection mask for the material which causes the TG value to be different to the screenshot. Anyway the TG value doesn't care for this application because it means the maximum temperature before the PCB is melting away. Please use the recommended setting from the selection mask.

Feel free to share the screenshot before placing the order. I will change the screenshots in the repo later or maybe we can add a better solution to share the complete settings.

[aschmeer01]

Ok understood, I am attaching screenshots of the selections after Gerber file loaded and selecting 4 layers.
There is an additional selection "UV printing Multi-color (beta)", which I set to "None".

FYI: I too have a calico kitty, love your avatar pic!

[Kampi]

Hi,
it looks good. If you filled out the layers correctly you can order it.

[aschmeer01]

Ordered! Thanks for the help!