Home

Welcome to the mptsd wiki!

Below is my basic usage information page to assist with usage and shall be updated when improvements and feature available.

mptsd is a versatile tool for MPEG TS multichannel multiplexing of individual spts => mpts. mptsd offering a wide range of features from server configuration to handling various output settings. This document provides an overview of all command-line options available as of 28-03-2024.

Usage

Identification

• -i ident: Sets the server ident. Default: ux/mptsd.

Server Settings

• -b addr: Binds to a local IP address. Default: 0.0.0.0.
• -p port: Sets the port to listen on. Default: 0.
• -N: Disables network.
• -d pidfile: Daemonizes with specified pidfile.
• -l host: Specifies the Syslog host. Default: disabled.
• -L port: Sets the Syslog port. Default: 514.

Configuration Files

• -g file: Specifies the global configuration file. Default: mptsd.conf.
• -c file: Specifies the channels configuration file. Default: mptsd_channels.conf.
• -e file: Specifies the EPG configuration file. Default: mptsd_epg.conf.
• -n file: Specifies the NIT configuration file. Default: mptsd_nit.conf.

Output Settings

• -O ip: Sets the output UDP address.
• -P ip: Sets the output UDP port. Default: 5000.
• -o ip: Specifies the output interface address. Default: 0.0.0.0.
• -t ttl: Sets the multicast TTL. Default: 1.
• -s SSRC: Enables RTP. Default: disabled.
• -B Mbps: Sets the output bitrate in Mbps. Default: 38.00.
• -m mode: Sets the PCR mode. Available modes:
  • Mode 0: Do not touch PCRs (default).
  • Mode 1: Move PCRs to their calculated place.
  • Mode 2: Rewrite PCRs using output bitrate.
  • Mode 3: Move PCRs and rewrite them.

Other Settings

• -q: Quiet mode.
• -D: Debug mode.
• -W: Write output file (recommended to use with -N).
• -f: Specifies the output filename. Default: mptsd-output.ts (use - for stdout).
• -E: Write input file.
• -9: Enable LCN support. Default: disabled.

Example command line

mptsd -m 3 -b 0.0.0.0 -O 224.0.0.1 -p 1234 -g ./somepath/mux/mptsd.conf -c ./somepath/mux/mptsd_channels.conf -e ./somepath/mux/mptsd_epg.conf -n ./somepath/mux/mptsd_nit.conf -i mysuper-mux