.appveyor.yml

environment:

  matrix:

    # For Python versions available on Appveyor, see
    # http://www.appveyor.com/docs/installed-software#python
    # The list here is complete (excluding Python 2.6, which
    # isn't covered by this document) at the time of writing.

    - PYTHON_VERSION: 2.7
      #PYTHON: "C:\\Python27"
      PYTHON: "C:\\Miniconda-x64"
      CATEGORY: "nightly"

    # Removing testing of 3.4, as it inexplicably runs >10x slower than
    # other Python versions and regularly times out (60 minutes)
    #- PYTHON_VERSION: 3.4
    #  #PYTHON: "C:\\Python34"
    #  PYTHON: "C:\\Miniconda3-x64"
    #  CATEGORY: "nightly"

    - PYTHON_VERSION: 3.5
      #PYTHON: "C:\\Python35"
      PYTHON: "C:\\Miniconda35-x64"
      CATEGORY: "nightly"

    - PYTHON_VERSION: 3.6
      #PYTHON: "C:\\Python36"
      PYTHON: "C:\\Miniconda36-x64"
      CATEGORY: "nightly"

    - PYTHON_VERSION: 2.7
      #PYTHON: "C:\\Python27"
      PYTHON: "C:\\Miniconda-x64"
      CATEGORY: "nightly"
      EXTRAS: YES

    - PYTHON_VERSION: 3.6
      #PYTHON: "C:\\Python36"
      PYTHON: "C:\\Miniconda36-x64"
      CATEGORY: "nightly"
      EXTRAS: YES


    ##- PYTHON: "C:\\Python33"
    #- PYTHON: "C:\\Python34"
    #- PYTHON: "C:\\Python27-x64"
    ##- PYTHON: "C:\\Python33-x64"
    ##  DISTUTILS_USE_SDK: "1"
    #- PYTHON: "C:\\Python34-x64"
    #  DISTUTILS_USE_SDK: "1"
    #- PYTHON: "C:\\Python35-x64"

install:
  # We need wheel installed to build wheels
  - "SET PATH=%PYTHON%;%PYTHON%\\Scripts;%PYTHON%\\Library\\bin;%PATH%"
  - python --version
  #
  # Set standardized ways to invoke conda for the various channels.  We
  # are seeing strange issues where conda-forge and cachemeorg are
  # fighting with anaconda over the version of core packages (notably,
  # conda).  The following prevents conda-forge and cacheme.org from
  # overriding anaconda.
  #
  - SET CONDA_INSTALL=conda install -q -y
  - "SET ANACONDA=%CONDA_INSTALL% -c anaconda"
  - "SET CONDAFORGE=%CONDA_INSTALL% -c conda-forge --no-update-dependencies"
  - "SET CACHEMEORG=%CONDA_INSTALL% -c cachemeorg --no-update-dependencies"
  #
  # Update conda, then force it to NOT update itself again
  #
  - conda config --set always_yes yes
  - conda update -q -y -c anaconda conda
  - conda config --set auto_update_conda false
  #
  - "%CONDAFORGE% setuptools pip"
  - "IF %PYTHON_VERSION%==2.6 (python -m pip install ordereddict)"
  - python -m pip install coverage
  - python -m pip install codecov
  - IF DEFINED YAML (python -m pip install pyyaml)
  - "IF DEFINED PYRO (python -m pip install %PYRO%)"
  - python -m pip install xlrd
  - python -m pip install openpyxl
  - python -m pip install sphinx_rtd_theme
  - "%ANACONDA% pandas networkx"
  - "IF NOT %PYTHON_VERSION%==2.6 (%ANACONDA% scipy)"
  #
  # Install GAMS
  #
  - ps: Start-FileDownload 'https://d37drm4t2jghv5.cloudfront.net/distributions/24.8.5/windows/windows_x64_64.exe'
  - windows_x64_64.exe /SP- /VERYSILENT /NORESTART /DIR=.\gams /NOICONS
  - "SET PATH=%cd%\\gams;%PATH%"
  #
  # Install pyomo.extras
  #
  - "IF DEFINED EXTRAS (%CONDAFORGE% pyomo.extras)"
  #
  - "%CONDAFORGE% glpk"
  - "glpsol -v"
  # NOTE: conda-forge doesn't build ipopt for Windows....
  - "%CACHEMEORG% ipopt_bin"
  - "ipopt -v"
  #
  # Clone but don't install pyomo-model-libraries
  #
  - "git clone https://github.com/Pyomo/pyomo-model-libraries.git"
  - "python -m pip install git+https://github.com/PyUtilib/pyutilib"
  - "python setup.py develop"
  #
  # Verify the python version
  - python --version

build: off


test_script:
  # Put your test command here.
  # If you don't need to build C extensions on 64-bit Python 3.3 or 3.4,
  # you can remove "build.cmd" from the front of the command, as it's
  # only needed to support those cases.
  # Note that you must use the environment variable %PYTHON% to refer to
  # the interpreter you're using - Appveyor does not do anything special
  # to put the Python evrsion you want to use on PATH.
  #
  # This block of commands enable tracking of coverage for any
  # subprocesses launched by tests
  - "SET BUILD_DIR=%cd%"
  - "SET COVERAGE_PROCESS_START=%BUILD_DIR%\\coveragerc"
  - "copy %BUILD_DIR%\\.coveragerc %COVERAGE_PROCESS_START%"
  - "echo data_file=%BUILD_DIR%\\.coverage >> %COVERAGE_PROCESS_START%"
  - python -c "from distutils.sysconfig import get_python_lib; import os; FILE=open(os.path.join(get_python_lib(),'run_coverage_at_startup.pth'), 'w'); FILE.write('import coverage; coverage.process_startup()'); FILE.close()"

  # Run Pyomo tests
  - "test.pyomo -v --cat=%CATEGORY% pyomo %BUILD_DIR%\\pyomo-model-libraries"

  # Run documentation tests
  - "nosetests -v --with-doctest --doctest-extension=.rst doc\\OnlineDocs"


#after_test:
  # This step builds your wheels.
  # Again, you only need build.cmd if you're building C extensions for
  # 64-bit Python 3.3/3.4. And you need to use %PYTHON% to get the correct
  # interpreter
  #- "build.cmd %PYTHON%\\python.exe setup.py bdist_wheel"


#artifacts:
  # bdist_wheel puts your built wheel in the dist directory
  #- path: dist\*


on_success:
  #  You can use this step to upload your artifacts to a public website.
  #  See Appveyor's documentation for more details. Or you can simply
  #  access your wheels from the Appveyor "artifacts" tab for your build.
  #
  # Combine coverage reports over all subprocesses
  - "cd %BUILD_DIR%"
  - dir .cov*
  - "coverage combine %BUILD_DIR%"
  - codecov -X gcov