Skip to content

Latest commit

 

History

History
238 lines (192 loc) · 9.37 KB

README.md

File metadata and controls

238 lines (192 loc) · 9.37 KB

podman

Table of Contents

  1. Description
  2. Setup - Getting started with podman
  3. Usage - Configuration options and additional functionality
  4. Examples - Example configurations
  5. Limitations - OS compatibility, etc.
  6. Development - Guide for contributing to the module

Description

Podman enables running standard docker containers without the usual docker daemon. This has some benefits from a security perspective, with the key point of enabling containers to run as an unprivileged user. Podman also has the concept of a 'pod', which is a shared namespace where multiple containers can be deployed and communicate with each other over the loopback address of '127.0.0.1'.

Podman version 4.4 and later include support for quadlets that enable managing containers directly with systemd unit files and services. This greatly simplies managing podman services and is now supported by this module with the new 'quadlet' defined type that manages the systemd unit files and resulting services.

The defined types 'pod', 'image', 'volume', 'secret' and 'container' are essentially wrappers around the respective podman "create" commands (podman <type> create). The defined types support all flags for the command, but require them to be expressed using the long form (--env instead of -e). Flags that don't require values should set the value to undef (use ~ or null in YAML). Flags that are used more than once should be expressed as an array. The Jenkins example configuration below demonstrates some of this in the flags and service_flags hashes.

Setup

The module installs packages including 'podman', 'skopeo', and optionally 'podman-docker'. The 'podman' package provides core functionality for running containers, while 'skopeo' is used to check for container image updates. The 'podman-docker' package provides a 'docker' command for those that are used to typing 'docker' instead of 'podman' (the 'podman' command is purposefully compatible with 'docker').

Simply including the module is enough to install the packages. There is no service associated with podman, so the module just installs the packages. Management of 'pods', 'images', 'volumes', 'containers' and 'quadlets' is done using defined types. The module's defined types are all implemented in the main 'podman' class, allowing resources to be declared as hiera hashes. See the reference for usage of the defined types.

Usage

Assign the module to node(s):

include podman

With the module assigned you can manage podman resources using hiera data. When podman defined types are used with the user parameter the resources will be owned by the defined user to support rootless containers. Using rootless containers this way also enables 'loginctl enable-linger' on the user so rootless containers can start and run automatically under the assigned user account when the system boots.

The module implements quadlet support by allowing the systemd unit file to be represented as a hash. The only quirk with this is that systemd unit files can have sections with duplicate keys while hashes must have unique keys. To work around this you can express hash keys with an array of values to producce the desired systemd unit file. The following hiera data shows this with the 'PublishPort' key. Note that the rootless "jenkins" user must also be managed as a puppet resource with a UID and valid subuid/subgid mappings - see the last example here for those resources.

podman::quadlets:
  jenkins-v0:
    quadlet_type: "volume"
    user: jenkins
    settings:
      Install:
        WantedBy: jenkins.service
  jenkins:
    user: jenkins
    settings:
      Container:
        Image: 'docker.io/jenkins/jenkins:lts'
        PublishPort:
          - '8080:8080'
          - '5000:5000'
        Environment: 'JENKINS_OPTS="--prefix=/jenkins"'
        Volume: "systemd-jenkins-v0:/var/jenkins_home"
      Service:
        TimeoutStartSec: 300
      Unit:
        Requires: "jenkins-v0-volume.service"

General podman and systemd notes

Be aware of how to work with podman and systemd user services when running rootless containers. The systemd and podman commands rely on the 'XDG_RUNTIME_DIR' environment variable that is normally set during login by pam_systemd. When you switch users this value will likely need to be set in the shell as follows:

su - <container_user>
export XDG_RUNTIME_DIR=/run/user/$(id -u)

Systemd user services use the same 'systemctl' commands, but with the --user flag. As the container user with the environment set, you an run podman and 'systemctl' commands.

podman container list [-a]

systemctl --user status podman-<container_name>

containerd configuration

This module also contains minimal support for editing the containerd configuration files that control some of the lower level settings for how containers are created. Currently, the only supported configuration files are /etc/containers/storage.conf and /etc/containers/containers.conf. You should be able to set any of the settings with those files using the $podman::storage_options and $podman::containers_options parameters respectively. For example (if using Hiera):

podman::storage_options:
  storage:
    rootless_storage_path: '"/tmp/containers-user-$UID/storage"'
podman::containers_options:
  engine:
    cgroup_manager: '"cgroupfs"'

Note the use of double quotes inside single quotes above. This is due to the way the puppetlabs/inifile module works currently.

Examples

The following example is a hiera-based role that leverages the types module to manage some dependent resources, then uses this module to deploy a rootless Jenkins container. Note that the environment here is using hiera lookup for class assignments. The example will perform the following configuration:

  • Create the jenkins user, group, and home directory using the types module
  • Manage the /etc/subuid and /etc/subgid files, creating entries for the jenkins user
  • Use loginctl to enable-linger on the 'jenkins' user so the user's containers can run as a systemd user service
  • Creates volume jenkins owned by user jenkins
  • Creates container jenkins from the defined image source owned by user jenkins
  • Creates secret db_pass with secret version and gives it to jenkins container as an environment variable.
  • Sets container flags to label the container, publish ports, and attach the previously created jenkins volume
  • Set service flags for the systemd service to timeout at 60 seconds
  • A systemd service podman-<container_name> is created, enabled, and started that runs as a user service
  • The container will be re-deployed any time the image source digest does not match the running container image because the default defined type parameter podman::container::update defaults to true
  • Creates a firewall rule on the host to allow connections to port 8080, which is published by the container. The rule is created with the firewalld_port type from the firewalld module, using the types module again so it can be defined entirely in hiera.
---
# Hiera based role for Jenkins container deployment

classes:
  - types
  - podman
  - firewalld

types::types:
  - firewalld_port

types::user:
  jenkins:
    ensure: present
    forcelocal: true
    uid:  222001
    gid:  222001
    password: '!!'
    home: /home/jenkins

types::group:
  jenkins:
    ensure: present
    forcelocal: true
    gid:  222001

types::file:
  /home/jenkins:
    ensure: directory
    owner: 222001
    group: 222001
    mode: '0700'
    require: 'User[jenkins]'

podman::manage_subuid: true
podman::subid:
  '222001':
    subuid: 12300000
    count: 65535

podman::volumes:
  jenkins:
    user: jenkins

lookup_options:
  podman::secret::secret:
    convert_to: "Sensitive"
podman::secret:
  db_pass:
    user: jenkins
    secret: very
    label:
      - version=20230615

podman::containers:
  jenkins:
    user: jenkins
    image: 'docker.io/jenkins/jenkins:lts'
    flags:
      label:
        - purpose=dev
      publish:
        - '8080:8080'
        - '50000:50000'
      volume: 'jenkins:/var/jenkins_home'
      secret:
        - 'db_pass,type=env,target=DB_PASS'
    service_flags:
      timeout: '60'
    require:
      - Podman::Volume[jenkins]

types::firewalld_port:
  podman_jenkins:
    ensure: present
    zone: public
    port: 8080
    protocol: tcp

Several additional examples are in a separate github project, including a Traefik container configuration that enables SSL termination and proxy access to other containers running on the host, with a dynamic configuration directory enabling updates to proxy rules as new containers are added and/or removed.

Limitations

The module was written and tested with RedHat/CentOS, but should work with any distribution that uses systemd and includes the podman and skopeo packages

Development

I'd appreciate any feedback. To contribute to development, fork the source and submit a pull request.