custom_postgui.hal

# Include your customized HAL commands here
# The commands in this file are run after the AXIS GUI (including PyVCP panel) starts

#loadrt pwmgen output_type=0

#addf pwmgen.make-pulses base-thread
#addf pwmgen.update servo-thread

#net pwm_out pwmgen.0.pwm 
#net pwm_out parport.0.pin-14-out 
#net pwm_value pwmgen.0.value 
#net pwm_value pyvcp.value-f
#net pwm_dutycycle pwmgen.0.curr-dc 
#net pwm_dutycycle pyvcp.dutycycle

#setp pwmgen.0.scale 30
#setp pwmgen.0.pwm-freq 1000
#setp pwmgen.0.dither-pwm 0
#setp pwmgen.0.min-dc 0.0
#setp pwmgen.0.max-dc 1.0

#net pwm_en pwmgen.0.enable
#net pwm_en pyvcp.pwm-en