Error to add HUAWEI

[StackAls]

Hello! I install new netbox with netdoc - Instruction
I also add ntc-templates.
But my data not parsed.

what logs and data should I provide you with?

[dainok]

Open a log, for example display arp. Export (top-right) the JSON file and send it to me.

[StackAls]

Open a log, for example display arp. Export (top-right) the JSON file and send it to me.

logs.tar.gz

Thanks!! I cut the password in 89.json

[dainok]

@StackAls which type of device is this?
Huawei is a nightmare because many models give a different outputs, and that's hard to automate.

The failing supported logs are

• display arp all
• display lldp neighbor
• display interface

The command about display vlan is failing, is this correct? Is there any other commands?
Templates to be fixes are stored in a 3rd party repository: https://github.com/networktocode/ntc-templates

[StackAls]

@dainok HUAWEI CloudEngine S5735-S24T4X

logs of commands
netbox.log

display vlan

<MSH294317TEST2>display vlan all    
                             ^
Error: Wrong parameter found at '^' position.
<MSH294317TEST2>display vlan     
The total number of VLANs is: 2
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------

VID  Type    Ports                                                          
--------------------------------------------------------------------------------
1    common  UT:GE0/0/2(D)      GE0/0/3(D)      GE0/0/4(D)      GE0/0/5(D)      
                GE0/0/6(D)      GE0/0/7(D)      GE0/0/8(D)      GE0/0/9(D)      
                GE0/0/10(D)     GE0/0/11(D)     GE0/0/12(D)     GE0/0/13(D)     
                GE0/0/14(D)     GE0/0/15(D)     GE0/0/16(D)     GE0/0/17(D)     
                GE0/0/18(D)     GE0/0/19(D)     GE0/0/20(D)     GE0/0/21(D)     
                GE0/0/22(D)     GE0/0/23(D)     GE0/0/24(D)     XGE0/0/1(D)     
                XGE0/0/2(D)     XGE0/0/3(D)     XGE0/0/4(D)                     
2008 common  UT:GE0/0/1(U)                                                      

VID  Status  Property      MAC-LRN Statistics Description      
--------------------------------------------------------------------------------
1    enable  default       enable  disable    VLAN 0001                         
2008 enable  default       enable  disable    VLAN 2008                         
<MSH294317TEST2>

I add this https://github.com/networktocode/ntc-templates - also errors

[dainok]

You are required to fix NTC Templates. I can help you on that, but I expect busy days in the next weeks.ì so it will take times.