linux_802.1x.md

连接802.1x

配置/etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant  
ctrl_interface_group=root  
ap_scan=0  
network={  
   key_mgmt=IEEE8021X  
   eap=PEAP  
   phase1="peaplabel=0"  
   phase2="auth=MSCHAPV2"  
   identity="USERNAME"  
   password="PASSWORD"  
}

• 脚本启动认证和dhcp - startnet.sh

#!/bin/bash  
  
ifconfig eth0 up  
ifconfig eth0 promisc  
wpa_supplicant -i eth0 -B -Dwired -c /etc/wpa_supplicant/wpa_supplicant.conf  
sleep 1 
dhcpd eth0

FreeBSD上使用上述方法同样可行（注意网卡名称变化）

对于不使用802.1x的无线网络

/etc/wpa_supplicant/wpa_supplicant.conf

network={  
ssid="Your-AP-SSID"  
key_mgmt=WPA-PSK  
psk="your-password"  
priority=5  
} 

参考

• IEEE 802.1X