From 74f0fc936c059e622e1a0c1006c7a7d2fcd29a58 Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Fri, 31 Aug 2018 16:01:19 +0800 Subject: [PATCH 01/41] docs/vm/hmm.rst: Add missed space This space missing caused the colour scheme in vim editor messy after that line. Add it to fix. Signed-off-by: Baoquan He [ jc: fixed alignment after the changed line ] Signed-off-by: Jonathan Corbet --- Documentation/vm/hmm.rst | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst index cdf3911582c863..44205f0b671fa0 100644 --- a/Documentation/vm/hmm.rst +++ b/Documentation/vm/hmm.rst @@ -194,13 +194,13 @@ use either:: unsigned long start, unsigned long end, hmm_pfn_t *pfns); - int hmm_vma_fault(struct vm_area_struct *vma, - struct hmm_range *range, - unsigned long start, - unsigned long end, - hmm_pfn_t *pfns, - bool write, - bool block); + int hmm_vma_fault(struct vm_area_struct *vma, + struct hmm_range *range, + unsigned long start, + unsigned long end, + hmm_pfn_t *pfns, + bool write, + bool block); The first one (hmm_vma_get_pfns()) will only fetch present CPU page table entries and will not trigger a page fault on missing or non-present entries. From 0e0f00935ae182d579c40d59720634b466562d84 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 24 Aug 2018 14:47:44 +0200 Subject: [PATCH 02/41] doc: dev-tools: kselftest.rst: update config file location Config fragment files should be placed in tools/testing/selftests//config Signed-off-by: Anders Roxell Acked-by: Shuah Khan (Samsung OSG) Signed-off-by: Jonathan Corbet --- Documentation/dev-tools/kselftest.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 6f653acea24845..dad1bb8711e264 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -159,7 +159,7 @@ Contributing new tests (details) * If a test needs specific kernel config options enabled, add a config file in the test directory to enable them. - e.g: tools/testing/selftests/android/ion/config + e.g: tools/testing/selftests/android/config Test Harness ============ From cb95ff7da1182e9d60a810d79e76a333db929d98 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 18 Aug 2018 02:33:30 +0900 Subject: [PATCH 03/41] docs: fix typo in table describing 4.16 development cycle Fix s/4.17/4.16/ typo. Fixes: 8962e40c1993 ("docs: update kernel versions and dates in tables") Cc: Tim Bird Cc: Jonathan Corbet Signed-off-by: Akinobu Mita Signed-off-by: Jonathan Corbet --- Documentation/process/2.Process.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index 51d0349c780990..ae020d84d7c460 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -82,7 +82,7 @@ As an example, here is how the 4.16 development cycle went (all dates in March 11 4.16-rc5 March 18 4.16-rc6 March 25 4.16-rc7 - April 1 4.17 stable release + April 1 4.16 stable release ============== =============================== How do the developers decide when to close the development cycle and create From ff7872ef6f9ada550e81a177f8792da766e554d8 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 16 Aug 2018 21:12:07 -0700 Subject: [PATCH 04/41] Documentation/fb/vesafb.txt: "inverse" option corrections Spell the vesafb "inverse" option correctly and tell what it does. Signed-off-by: Randy Dunlap Cc: Bartlomiej Zolnierkiewicz Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Cc: Antonino A. Daplas Signed-off-by: Jonathan Corbet --- Documentation/fb/vesafb.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt index 950d5a658cb338..413bb73235bedc 100644 --- a/Documentation/fb/vesafb.txt +++ b/Documentation/fb/vesafb.txt @@ -114,11 +114,11 @@ to turn it on. You can pass options to vesafb using "video=vesafb:option" on the kernel command line. Multiple options should be separated -by comma, like this: "video=vesafb:ypan,invers" +by comma, like this: "video=vesafb:ypan,inverse" Accepted options: -invers no comment... +inverse use inverse color map ypan enable display panning using the VESA protected mode interface. The visible screen is just a window of the From 8a2933cfe7841cf8e3ed268b13210b71a80aabf0 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 16 Aug 2018 18:50:47 +0900 Subject: [PATCH 05/41] docs: tracing: Add stacktrace filter command Add a description of stacktrace filter command. Signed-off-by: Masami Hiramatsu Acked-by: Steven Rostedt (VMware) Signed-off-by: Jonathan Corbet --- Documentation/trace/ftrace.rst | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index 7ea16a0ceffc50..f82434f2795e21 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -2987,6 +2987,9 @@ The following commands are supported: command, it only prints out the contents of the ring buffer for the CPU that executed the function that triggered the dump. +- stacktrace: + When the function is hit, a stack trace is recorded. + trace_pipe ---------- From 60ca05c3b44566b70d64fbb8e87a6e0c67725468 Mon Sep 17 00:00:00 2001 From: Salvatore Bonaccorso Date: Wed, 15 Aug 2018 07:46:04 +0200 Subject: [PATCH 06/41] Documentation/l1tf: Fix small spelling typo Fix small typo (wiil -> will) in the "3.4. Nested virtual machines" section. Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry") Cc: linux-kernel@vger.kernel.org Cc: Jonathan Corbet Cc: Josh Poimboeuf Cc: Paolo Bonzini Cc: Greg Kroah-Hartman Cc: Tony Luck Cc: linux-doc@vger.kernel.org Cc: trivial@kernel.org Signed-off-by: Salvatore Bonaccorso Signed-off-by: Jonathan Corbet --- Documentation/admin-guide/l1tf.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/admin-guide/l1tf.rst b/Documentation/admin-guide/l1tf.rst index bae52b845de0b9..b85dd80510b026 100644 --- a/Documentation/admin-guide/l1tf.rst +++ b/Documentation/admin-guide/l1tf.rst @@ -553,7 +553,7 @@ When nested virtualization is in use, three operating systems are involved: the bare metal hypervisor, the nested hypervisor and the nested virtual machine. VMENTER operations from the nested hypervisor into the nested guest will always be processed by the bare metal hypervisor. If KVM is the -bare metal hypervisor it wiil: +bare metal hypervisor it will: - Flush the L1D cache on every switch from the nested hypervisor to the nested virtual machine, so that the nested hypervisor's secrets are not From 9799445af124c2476c7e0cc5432375348b6a4724 Mon Sep 17 00:00:00 2001 From: Markus Heiser Date: Tue, 14 Aug 2018 13:43:12 +0200 Subject: [PATCH 07/41] docs: tidy up TOCs and refs to license-rules.rst The documentation and TOCs are organized in a manner of a tree. Adding a TOC to the root, which refers to a file which is located in a subfolder forms a grid. Those TOCs are a bit confusing and thats why we get additional error messages while building partial documentation:: $ make SPHINXDIRS=process htmldocs ... checking consistency... Documentation/process/license-rules.rst: \ WARNING: document isn't included in any toctree To fix it, the *root-license-TOC* is replaced by a reference and the 'license-roles.txt' is added to the Documentation/process/index.rst TOC. BTW: there was an old licences remark in Documentation/process/howto.rst which is also updated, mentioning SPDX and pointing to the license-rules.rst Signed-off-by: Markus Heiser Signed-off-by: Jonathan Corbet --- Documentation/index.rst | 5 +---- Documentation/process/howto.rst | 13 +++++++------ Documentation/process/index.rst | 1 + Documentation/process/license-rules.rst | 2 ++ 4 files changed, 11 insertions(+), 10 deletions(-) diff --git a/Documentation/index.rst b/Documentation/index.rst index 5db7e87c7cb1d6..c858c2e66e361d 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -22,10 +22,7 @@ The following describes the license of the Linux kernel source code (GPLv2), how to properly mark the license of individual files in the source tree, as well as links to the full license text. -.. toctree:: - :maxdepth: 2 - - process/license-rules.rst +* :ref:`kernel_licensing` User-oriented documentation --------------------------- diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index 130bf0f4887502..dcb25f94188e42 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -57,12 +57,13 @@ of doing things. Legal Issues ------------ -The Linux kernel source code is released under the GPL. Please see the -file, COPYING, in the main directory of the source tree, for details on -the license. If you have further questions about the license, please -contact a lawyer, and do not ask on the Linux kernel mailing list. The -people on the mailing lists are not lawyers, and you should not rely on -their statements on legal matters. +The Linux kernel source code is released under the GPL. Please see the file +COPYING in the main directory of the source tree. The Linux kernel licensing +rules and how to use `SPDX `_ identifiers in source code are +descibed in :ref:`Documentation/process/license-rules.rst `. +If you have further questions about the license, please contact a lawyer, and do +not ask on the Linux kernel mailing list. The people on the mailing lists are +not lawyers, and you should not rely on their statements on legal matters. For common questions and answers about the GPL, please see: diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 37bd0628b6ee90..c0b3bd25dbae57 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -19,6 +19,7 @@ Below are the essential guides that every developer should read. .. toctree:: :maxdepth: 1 + license-rules howto code-of-conflict development-process diff --git a/Documentation/process/license-rules.rst b/Documentation/process/license-rules.rst index 8ea26325fe3f11..2bb8c0fc2238a2 100644 --- a/Documentation/process/license-rules.rst +++ b/Documentation/process/license-rules.rst @@ -1,5 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 +.. _kernel_licensing: + Linux kernel licensing rules ============================ From 9eff4a2e92a2ea8e8364976a699e3a03937c3457 Mon Sep 17 00:00:00 2001 From: Himanshu Jha Date: Mon, 13 Aug 2018 16:16:38 +0530 Subject: [PATCH 08/41] docs: dev-tools: coccinelle: Update documentation * Fix install instruction by adding `./autogen` command before `./configure`. * Add link to a more detailed installation instruction. * Add link to SmPL grammar documentation. * Add single space after ',' to slightly improve readability. Signed-off-by: Himanshu Jha Acked-by: Julia Lawall Signed-off-by: Jonathan Corbet --- Documentation/dev-tools/coccinelle.rst | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst index 94f41c290bfc69..aa14f05cabb1bb 100644 --- a/Documentation/dev-tools/coccinelle.rst +++ b/Documentation/dev-tools/coccinelle.rst @@ -30,18 +30,29 @@ of many distributions, e.g. : - NetBSD - FreeBSD -You can get the latest version released from the Coccinelle homepage at +Some distribution packages are obsolete and it is recommended +to use the latest version released from the Coccinelle homepage at http://coccinelle.lip6.fr/ -Once you have it, run the following command:: +Or from Github at: - ./configure +https://github.com/coccinelle/coccinelle + +Once you have it, run the following commands:: + + ./autogen + ./configure make as a regular user, and install it with:: sudo make install +More detailed installation instructions to build from source can be +found at: + +https://github.com/coccinelle/coccinelle/blob/master/install.txt + Supplemental documentation --------------------------- @@ -51,6 +62,10 @@ https://bottest.wiki.kernel.org/coccicheck The wiki documentation always refers to the linux-next version of the script. +For Semantic Patch Language(SmPL) grammar documentation refer to: + +http://coccinelle.lip6.fr/documentation.php + Using Coccinelle on the Linux kernel ------------------------------------ @@ -223,7 +238,7 @@ Since coccicheck runs through make, it naturally runs from the kernel proper dir, as such the second rule above would be implied for picking up a .cocciconfig when using ``make coccicheck``. -``make coccicheck`` also supports using M= targets.If you do not supply +``make coccicheck`` also supports using M= targets. If you do not supply any M= target, it is assumed you want to target the entire kernel. The kernel coccicheck script has:: From 9a40068220cb6ef15785a82155f38298d5ee9d35 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Sep 2018 17:02:21 -0700 Subject: [PATCH 09/41] FireWire: clean up firewire-cdev.h kernel-doc Clean up kernel-doc warnings in so that it can be added to a Firewire/IEEE 1394 driver-api chapter without adding lots of noisy warnings to the documentation build. Signed-off-by: Randy Dunlap Cc: Stefan Richter Cc: Takashi Sakamoto Cc: linux-doc@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: Randy Dunlap Cc: Andrew Morton Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Jonathan Corbet Signed-off-by: Jonathan Corbet --- include/uapi/linux/firewire-cdev.h | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/include/uapi/linux/firewire-cdev.h b/include/uapi/linux/firewire-cdev.h index 1db453e4b550eb..1acd2b179aeff6 100644 --- a/include/uapi/linux/firewire-cdev.h +++ b/include/uapi/linux/firewire-cdev.h @@ -47,11 +47,11 @@ #define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09 /** - * struct fw_cdev_event_common - Common part of all fw_cdev_event_ types + * struct fw_cdev_event_common - Common part of all fw_cdev_event_* types * @closure: For arbitrary use by userspace - * @type: Discriminates the fw_cdev_event_ types + * @type: Discriminates the fw_cdev_event_* types * - * This struct may be used to access generic members of all fw_cdev_event_ + * This struct may be used to access generic members of all fw_cdev_event_* * types regardless of the specific type. * * Data passed in the @closure field for a request will be returned in the @@ -123,7 +123,13 @@ struct fw_cdev_event_response { /** * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2 + * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST + * @tcode: Transaction code of the incoming request + * @offset: The offset into the 48-bit per-node address space + * @handle: Reference to the kernel-side pending request + * @length: Data length, i.e. the request's payload size in bytes + * @data: Incoming data, if any * * This event is sent instead of &fw_cdev_event_request2 if the kernel or * the client implements ABI version <= 3. &fw_cdev_event_request lacks @@ -353,7 +359,7 @@ struct fw_cdev_event_phy_packet { }; /** - * union fw_cdev_event - Convenience union of fw_cdev_event_ types + * union fw_cdev_event - Convenience union of fw_cdev_event_* types * @common: Valid for all types * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE @@ -735,7 +741,7 @@ struct fw_cdev_set_iso_channels { * @header: Header and payload in case of a transmit context. * * &struct fw_cdev_iso_packet is used to describe isochronous packet queues. - * Use the FW_CDEV_ISO_ macros to fill in @control. + * Use the FW_CDEV_ISO_* macros to fill in @control. * The @header array is empty in case of receive contexts. * * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT: @@ -842,7 +848,7 @@ struct fw_cdev_queue_iso { * the %FW_CDEV_ISO_SYNC bit set * @tags: Tag filter bit mask. Only valid for isochronous reception. * Determines the tag values for which packets will be accepted. - * Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags. + * Use FW_CDEV_ISO_CONTEXT_MATCH_* macros to set @tags. * @handle: Isochronous context handle within which to transmit or receive */ struct fw_cdev_start_iso { @@ -1009,8 +1015,8 @@ struct fw_cdev_send_stream_packet { * on the same card as this device. After transmission, an * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated. * - * The payload @data[] shall be specified in host byte order. Usually, - * @data[1] needs to be the bitwise inverse of @data[0]. VersaPHY packets + * The payload @data\[\] shall be specified in host byte order. Usually, + * @data\[1\] needs to be the bitwise inverse of @data\[0\]. VersaPHY packets * are an exception to this rule. * * The ioctl is only permitted on device files which represent a local node. From 48f02b88c82b5aaf51adbce0932e47a3044e35d4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Sep 2018 17:02:22 -0700 Subject: [PATCH 10/41] FireWire: clean up core-iso.c kernel-doc Clean up kernel-doc warnings in so that it can be added to a Firewire/IEEE 1394 driver-api chapter without adding lots of noisy warnings to the documentation build. Signed-off-by: Randy Dunlap Cc: Stefan Richter Cc: Takashi Sakamoto Cc: linux-doc@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: Randy Dunlap Cc: Andrew Morton Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Jonathan Corbet Signed-off-by: Jonathan Corbet --- drivers/firewire/core-iso.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/firewire/core-iso.c b/drivers/firewire/core-iso.c index 051327a951b195..35e784cffc23d3 100644 --- a/drivers/firewire/core-iso.c +++ b/drivers/firewire/core-iso.c @@ -337,9 +337,16 @@ static void deallocate_channel(struct fw_card *card, int irm_id, /** * fw_iso_resource_manage() - Allocate or deallocate a channel and/or bandwidth + * @card: card interface for this action + * @generation: bus generation + * @channels_mask: bitmask for channel allocation + * @channel: pointer for returning channel allocation result + * @bandwidth: pointer for returning bandwidth allocation result + * @allocate: whether to allocate (true) or deallocate (false) * * In parameters: card, generation, channels_mask, bandwidth, allocate * Out parameters: channel, bandwidth + * * This function blocks (sleeps) during communication with the IRM. * * Allocates or deallocates at most one channel out of channels_mask. From 226b18ad5589550e989afce6b293580abc880a79 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Sep 2018 17:02:23 -0700 Subject: [PATCH 11/41] FireWire: clean up core-transaction.c kernel-doc Clean up kernel-doc warnings in so that it can be added to a Firewire/IEEE 1394 driver-api chapter without adding lots of noisy warnings to the documentation build. Signed-off-by: Randy Dunlap Cc: Stefan Richter Cc: Takashi Sakamoto Cc: linux-doc@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: Randy Dunlap Cc: Andrew Morton Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Jonathan Corbet Signed-off-by: Jonathan Corbet --- drivers/firewire/core-transaction.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c index 4372f9e4b0daeb..50bf1fe1775f91 100644 --- a/drivers/firewire/core-transaction.c +++ b/drivers/firewire/core-transaction.c @@ -410,6 +410,14 @@ static void transaction_callback(struct fw_card *card, int rcode, /** * fw_run_transaction() - send request and sleep until transaction is completed + * @card: card interface for this request + * @tcode: transaction code + * @destination_id: destination node ID, consisting of bus_ID and phy_ID + * @generation: bus generation in which request and response are valid + * @speed: transmission speed + * @offset: 48bit wide offset into destination's address space + * @payload: data payload for the request subaction + * @length: length of the payload, in bytes * * Returns the RCODE. See fw_send_request() for parameter documentation. * Unlike fw_send_request(), @data points to the payload of the request or/and @@ -604,6 +612,7 @@ EXPORT_SYMBOL(fw_core_add_address_handler); /** * fw_core_remove_address_handler() - unregister an address handler + * @handler: callback * * To be called in process context. * @@ -828,6 +837,7 @@ EXPORT_SYMBOL(fw_send_response); /** * fw_get_request_speed() - returns speed at which the @request was received + * @request: firewire request data */ int fw_get_request_speed(struct fw_request *request) { From ea2ae0ecc9ad8c47ca25837823cc25679a1e4d1a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Sep 2018 17:02:24 -0700 Subject: [PATCH 12/41] FireWire: add a Documentation driver-api chapter Add a basic Firewire/IEEE 1394 driver API chapter to the Linux kernel documentation. Signed-off-by: Randy Dunlap Cc: Stefan Richter Cc: Takashi Sakamoto Cc: linux-doc@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: Randy Dunlap Cc: Andrew Morton Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Jonathan Corbet Signed-off-by: Jonathan Corbet --- Documentation/driver-api/firewire.rst | 33 +++++++++++++++++++++++++++ Documentation/driver-api/index.rst | 1 + 2 files changed, 34 insertions(+) create mode 100644 Documentation/driver-api/firewire.rst diff --git a/Documentation/driver-api/firewire.rst b/Documentation/driver-api/firewire.rst new file mode 100644 index 00000000000000..31f0b292bb757e --- /dev/null +++ b/Documentation/driver-api/firewire.rst @@ -0,0 +1,33 @@ +=========================================== +Firewire (IEEE 1394) driver Interface Guide +=========================================== + +Introduction and Overview +========================= + +TBD + +Firewire char device data structures +==================================== + +.. kernel-doc:: include/uapi/linux/firewire-cdev.h + :internal: + +Firewire device probing and sysfs interfaces +============================================ + +.. kernel-doc:: drivers/firewire/core-device.c + :export: + +Firewire core transaction interfaces +==================================== + +.. kernel-doc:: drivers/firewire/core-transaction.c + :export: + +Firewire Isochronous I/O interfaces +=================================== + +.. kernel-doc:: drivers/firewire/core-iso.c + :export: + diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 6d9f2f9fe20ee6..1f0cdba2b2bfd0 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -29,6 +29,7 @@ available subsections can be seen below. iio/index input usb/index + firewire pci spi i2c From 2f4830ef96d21e144b742c394eb12888b0e233cc Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Tue, 4 Sep 2018 17:02:25 -0700 Subject: [PATCH 13/41] FireWire: add driver-api Introduction section Replace the Introduction section's TBD with some useful overview text. Signed-off-by: Takashi Sakamoto Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Randy Dunlap Cc: Stefan Richter Cc: Takashi Sakamoto Cc: linux-doc@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: Randy Dunlap Cc: Andrew Morton Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Jonathan Corbet Signed-off-by: Jonathan Corbet --- Documentation/driver-api/firewire.rst | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/Documentation/driver-api/firewire.rst b/Documentation/driver-api/firewire.rst index 31f0b292bb757e..94a2d7f01d9992 100644 --- a/Documentation/driver-api/firewire.rst +++ b/Documentation/driver-api/firewire.rst @@ -5,17 +5,32 @@ Firewire (IEEE 1394) driver Interface Guide Introduction and Overview ========================= -TBD +The Linux FireWire subsystem adds some interfaces into the Linux system to + use/maintain+any resource on IEEE 1394 bus. + +The main purpose of these interfaces is to access address space on each node +on IEEE 1394 bus by ISO/IEC 13213 (IEEE 1212) procedure, and to control +isochronous resources on the bus by IEEE 1394 procedure. + +Two types of interfaces are added, according to consumers of the interface. A +set of userspace interfaces is available via `firewire character devices`. A set +of kernel interfaces is available via exported symbols in `firewire-core` module. Firewire char device data structures ==================================== +.. include:: /ABI/stable/firewire-cdev + :literal: + .. kernel-doc:: include/uapi/linux/firewire-cdev.h :internal: Firewire device probing and sysfs interfaces ============================================ +.. include:: /ABI/stable/sysfs-bus-firewire + :literal: + .. kernel-doc:: drivers/firewire/core-device.c :export: From 9331e5e7b848edfced6b35547888eae913e3e189 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Sep 2018 19:29:27 +0100 Subject: [PATCH 14/41] efi_stub: update documentation on dtb= parameter The dtb= parameter is no longer the primary mechanism for providing a devicetree to the kernel. Now either firmware or the boot selector (ex. Grub) should provide the devicetree and dtb= should only be used for debug or when using firmware that doesn't understand DT. Update the EFI stub documentation to reflect the current usage. Signed-off-by: Grant Likely Reviewed-by: Alexander Graf Acked-by: Leif Lindholm Acked-by: Olof Johansson Acked-by: Ard Biesheuvel Signed-off-by: Jonathan Corbet --- Documentation/efi-stub.txt | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/Documentation/efi-stub.txt b/Documentation/efi-stub.txt index 41df801f9a507a..833edb0d0bc4a2 100644 --- a/Documentation/efi-stub.txt +++ b/Documentation/efi-stub.txt @@ -83,7 +83,18 @@ is passed to bzImage.efi. The "dtb=" option ----------------- -For the ARM and arm64 architectures, we also need to be able to provide a -device tree to the kernel. This is done with the "dtb=" command line option, -and is processed in the same manner as the "initrd=" option that is +For the ARM and arm64 architectures, a device tree must be provided to +the kernel. Normally firmware shall supply the device tree via the +EFI CONFIGURATION TABLE. However, the "dtb=" command line option can +be used to override the firmware supplied device tree, or to supply +one when firmware is unable to. + +Please note: Firmware adds runtime configuration information to the +device tree before booting the kernel. If dtb= is used to override +the device tree, then any runtime data provided by firmware will be +lost. The dtb= option should only be used either as a debug tool, or +as a last resort when a device tree is not provided in the EFI +CONFIGURATION TABLE. + +"dtb=" is processed in the same manner as the "initrd=" option that is described above. From b67620798b1ed93603a5a8de5f84f29ce4627fb9 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 7 Sep 2018 12:30:21 +0200 Subject: [PATCH 15/41] MAINTAINERS: sort excludes for Documentation Helps reading and hopefully avoids duplicates. Also, consistently add the trailing '/' to make clear those are directories. Signed-off-by: Wolfram Sang Signed-off-by: Jonathan Corbet --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index a5b256b259057c..8e6d1683958913 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4485,11 +4485,11 @@ S: Maintained F: Documentation/ F: scripts/kernel-doc X: Documentation/ABI/ +X: Documentation/acpi/ X: Documentation/devicetree/ -X: Documentation/acpi -X: Documentation/power -X: Documentation/spi -X: Documentation/media +X: Documentation/media/ +X: Documentation/power/ +X: Documentation/spi/ T: git git://git.lwn.net/linux.git docs-next DOCUMENTATION/ITALIAN From 9d92e4835ffce841a72e9cf6d1c022adc55428aa Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 7 Sep 2018 12:30:22 +0200 Subject: [PATCH 16/41] MAINTAINERS: add i2c to the excludes for Documentation I'll handle these myself but thanks for providing the fallback! Signed-off-by: Wolfram Sang Signed-off-by: Jonathan Corbet --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8e6d1683958913..a0bc1f2ea72122 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4487,6 +4487,7 @@ F: scripts/kernel-doc X: Documentation/ABI/ X: Documentation/acpi/ X: Documentation/devicetree/ +X: Documentation/i2c/ X: Documentation/media/ X: Documentation/power/ X: Documentation/spi/ From a7ddcea58ae22d85d94eabfdd3de75c3742e376b Mon Sep 17 00:00:00 2001 From: Henrik Austad Date: Tue, 4 Sep 2018 00:15:23 +0200 Subject: [PATCH 17/41] Drop all 00-INDEX files from Documentation/ This is a respin with a wider audience (all that get_maintainer returned) and I know this spams a *lot* of people. Not sure what would be the correct way, so my apologies for ruining your inbox. The 00-INDEX files are supposed to give a summary of all files present in a directory, but these files are horribly out of date and their usefulness is brought into question. Often a simple "ls" would reveal the same information as the filenames are generally quite descriptive as a short introduction to what the file covers (it should not surprise anyone what Documentation/sched/sched-design-CFS.txt covers) A few years back it was mentioned that these files were no longer really needed, and they have since then grown further out of date, so perhaps it is time to just throw them out. A short status yields the following _outdated_ 00-INDEX files, first counter is files listed in 00-INDEX but missing in the directory, last is files present but not listed in 00-INDEX. List of outdated 00-INDEX: Documentation: (4/10) Documentation/sysctl: (0/1) Documentation/timers: (1/0) Documentation/blockdev: (3/1) Documentation/w1/slaves: (0/1) Documentation/locking: (0/1) Documentation/devicetree: (0/5) Documentation/power: (1/1) Documentation/powerpc: (0/5) Documentation/arm: (1/0) Documentation/x86: (0/9) Documentation/x86/x86_64: (1/1) Documentation/scsi: (4/4) Documentation/filesystems: (2/9) Documentation/filesystems/nfs: (0/2) Documentation/cgroup-v1: (0/2) Documentation/kbuild: (0/4) Documentation/spi: (1/0) Documentation/virtual/kvm: (1/0) Documentation/scheduler: (0/2) Documentation/fb: (0/1) Documentation/block: (0/1) Documentation/networking: (6/37) Documentation/vm: (1/3) Then there are 364 subdirectories in Documentation/ with several files that are missing 00-INDEX alltogether (and another 120 with a single file and no 00-INDEX). I don't really have an opinion to whether or not we /should/ have 00-INDEX, but the above 00-INDEX should either be removed or be kept up to date. If we should keep the files, I can try to keep them updated, but I rather not if we just want to delete them anyway. As a starting point, remove all index-files and references to 00-INDEX and see where the discussion is going. Signed-off-by: Henrik Austad Acked-by: "Paul E. McKenney" Just-do-it-by: Steven Rostedt Reviewed-by: Jens Axboe Acked-by: Paul Moore Acked-by: Greg Kroah-Hartman Acked-by: Mark Brown Acked-by: Mike Rapoport Cc: [Almost everybody else] Signed-off-by: Jonathan Corbet --- Documentation/00-INDEX | 428 ------------------------ Documentation/PCI/00-INDEX | 26 -- Documentation/RCU/00-INDEX | 34 -- Documentation/RCU/rcu.txt | 4 - Documentation/admin-guide/README.rst | 3 +- Documentation/arm/00-INDEX | 50 --- Documentation/block/00-INDEX | 34 -- Documentation/blockdev/00-INDEX | 18 - Documentation/cdrom/00-INDEX | 11 - Documentation/cgroup-v1/00-INDEX | 26 -- Documentation/devicetree/00-INDEX | 12 - Documentation/fb/00-INDEX | 75 ----- Documentation/filesystems/00-INDEX | 153 --------- Documentation/filesystems/nfs/00-INDEX | 26 -- Documentation/fmc/00-INDEX | 38 --- Documentation/gpio/00-INDEX | 4 - Documentation/ide/00-INDEX | 14 - Documentation/ioctl/00-INDEX | 12 - Documentation/isdn/00-INDEX | 42 --- Documentation/kbuild/00-INDEX | 14 - Documentation/laptops/00-INDEX | 16 - Documentation/leds/00-INDEX | 32 -- Documentation/locking/00-INDEX | 16 - Documentation/m68k/00-INDEX | 7 - Documentation/mips/00-INDEX | 4 - Documentation/mmc/00-INDEX | 10 - Documentation/netlabel/00-INDEX | 10 - Documentation/netlabel/cipso_ipv4.txt | 11 +- Documentation/netlabel/introduction.txt | 2 +- Documentation/networking/00-INDEX | 234 ------------- Documentation/parisc/00-INDEX | 6 - Documentation/power/00-INDEX | 44 --- Documentation/powerpc/00-INDEX | 34 -- Documentation/s390/00-INDEX | 28 -- Documentation/scheduler/00-INDEX | 18 - Documentation/scsi/00-INDEX | 108 ------ Documentation/serial/00-INDEX | 16 - Documentation/spi/00-INDEX | 16 - Documentation/sysctl/00-INDEX | 16 - Documentation/timers/00-INDEX | 16 - Documentation/virtual/00-INDEX | 11 - Documentation/virtual/kvm/00-INDEX | 35 -- Documentation/vm/00-INDEX | 50 --- Documentation/w1/00-INDEX | 10 - Documentation/w1/masters/00-INDEX | 12 - Documentation/w1/slaves/00-INDEX | 14 - Documentation/x86/00-INDEX | 20 -- Documentation/x86/x86_64/00-INDEX | 16 - README | 1 - scripts/check_00index.sh | 67 ---- 50 files changed, 8 insertions(+), 1896 deletions(-) delete mode 100644 Documentation/00-INDEX delete mode 100644 Documentation/PCI/00-INDEX delete mode 100644 Documentation/RCU/00-INDEX delete mode 100644 Documentation/arm/00-INDEX delete mode 100644 Documentation/block/00-INDEX delete mode 100644 Documentation/blockdev/00-INDEX delete mode 100644 Documentation/cdrom/00-INDEX delete mode 100644 Documentation/cgroup-v1/00-INDEX delete mode 100644 Documentation/devicetree/00-INDEX delete mode 100644 Documentation/fb/00-INDEX delete mode 100644 Documentation/filesystems/00-INDEX delete mode 100644 Documentation/filesystems/nfs/00-INDEX delete mode 100644 Documentation/fmc/00-INDEX delete mode 100644 Documentation/gpio/00-INDEX delete mode 100644 Documentation/ide/00-INDEX delete mode 100644 Documentation/ioctl/00-INDEX delete mode 100644 Documentation/isdn/00-INDEX delete mode 100644 Documentation/kbuild/00-INDEX delete mode 100644 Documentation/laptops/00-INDEX delete mode 100644 Documentation/leds/00-INDEX delete mode 100644 Documentation/locking/00-INDEX delete mode 100644 Documentation/m68k/00-INDEX delete mode 100644 Documentation/mips/00-INDEX delete mode 100644 Documentation/mmc/00-INDEX delete mode 100644 Documentation/netlabel/00-INDEX delete mode 100644 Documentation/networking/00-INDEX delete mode 100644 Documentation/parisc/00-INDEX delete mode 100644 Documentation/power/00-INDEX delete mode 100644 Documentation/powerpc/00-INDEX delete mode 100644 Documentation/s390/00-INDEX delete mode 100644 Documentation/scheduler/00-INDEX delete mode 100644 Documentation/scsi/00-INDEX delete mode 100644 Documentation/serial/00-INDEX delete mode 100644 Documentation/spi/00-INDEX delete mode 100644 Documentation/sysctl/00-INDEX delete mode 100644 Documentation/timers/00-INDEX delete mode 100644 Documentation/virtual/00-INDEX delete mode 100644 Documentation/virtual/kvm/00-INDEX delete mode 100644 Documentation/vm/00-INDEX delete mode 100644 Documentation/w1/00-INDEX delete mode 100644 Documentation/w1/masters/00-INDEX delete mode 100644 Documentation/w1/slaves/00-INDEX delete mode 100644 Documentation/x86/00-INDEX delete mode 100644 Documentation/x86/x86_64/00-INDEX delete mode 100755 scripts/check_00index.sh diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX deleted file mode 100644 index 2754fe83f0d449..00000000000000 --- a/Documentation/00-INDEX +++ /dev/null @@ -1,428 +0,0 @@ - -This is a brief list of all the files in ./linux/Documentation and what -they contain. If you add a documentation file, please list it here in -alphabetical order as well, or risk being hunted down like a rabid dog. -Please keep the descriptions small enough to fit on one line. - Thanks -- Paul G. - -Following translations are available on the WWW: - - - Japanese, maintained by the JF Project (jf@listserv.linux.or.jp), at - http://linuxjf.sourceforge.jp/ - -00-INDEX - - this file. -ABI/ - - info on kernel <-> userspace ABI and relative interface stability. -CodingStyle - - nothing here, just a pointer to process/coding-style.rst. -DMA-API.txt - - DMA API, pci_ API & extensions for non-consistent memory machines. -DMA-API-HOWTO.txt - - Dynamic DMA mapping Guide -DMA-ISA-LPC.txt - - How to do DMA with ISA (and LPC) devices. -DMA-attributes.txt - - listing of the various possible attributes a DMA region can have -EDID/ - - directory with info on customizing EDID for broken gfx/displays. -IPMI.txt - - info on Linux Intelligent Platform Management Interface (IPMI) Driver. -IRQ-affinity.txt - - how to select which CPU(s) handle which interrupt events on SMP. -IRQ-domain.txt - - info on interrupt numbering and setting up IRQ domains. -IRQ.txt - - description of what an IRQ is. -Intel-IOMMU.txt - - basic info on the Intel IOMMU virtualization support. -Makefile - - It's not of interest for those who aren't touching the build system. -PCI/ - - info related to PCI drivers. -RCU/ - - directory with info on RCU (read-copy update). -SAK.txt - - info on Secure Attention Keys. -SM501.txt - - Silicon Motion SM501 multimedia companion chip -SubmittingPatches - - nothing here, just a pointer to process/coding-style.rst. -accounting/ - - documentation on accounting and taskstats. -acpi/ - - info on ACPI-specific hooks in the kernel. -admin-guide/ - - info related to Linux users and system admins. -aoe/ - - description of AoE (ATA over Ethernet) along with config examples. -arm/ - - directory with info about Linux on the ARM architecture. -arm64/ - - directory with info about Linux on the 64 bit ARM architecture. -auxdisplay/ - - misc. LCD driver documentation (cfag12864b, ks0108). -backlight/ - - directory with info on controlling backlights in flat panel displays -block/ - - info on the Block I/O (BIO) layer. -blockdev/ - - info on block devices & drivers -bt8xxgpio.txt - - info on how to modify a bt8xx video card for GPIO usage. -btmrvl.txt - - info on Marvell Bluetooth driver usage. -bus-devices/ - - directory with info on TI GPMC (General Purpose Memory Controller) -bus-virt-phys-mapping.txt - - how to access I/O mapped memory from within device drivers. -cdrom/ - - directory with information on the CD-ROM drivers that Linux has. -cgroup-v1/ - - cgroups v1 features, including cpusets and memory controller. -cma/ - - Continuous Memory Area (CMA) debugfs interface. -conf.py - - It's not of interest for those who aren't touching the build system. -connector/ - - docs on the netlink based userspace<->kernel space communication mod. -console/ - - documentation on Linux console drivers. -core-api/ - - documentation on kernel core components. -cpu-freq/ - - info on CPU frequency and voltage scaling. -cpu-hotplug.txt - - document describing CPU hotplug support in the Linux kernel. -cpu-load.txt - - document describing how CPU load statistics are collected. -cpuidle/ - - info on CPU_IDLE, CPU idle state management subsystem. -cputopology.txt - - documentation on how CPU topology info is exported via sysfs. -crc32.txt - - brief tutorial on CRC computation -crypto/ - - directory with info on the Crypto API. -dcdbas.txt - - information on the Dell Systems Management Base Driver. -debugging-modules.txt - - some notes on debugging modules after Linux 2.6.3. -debugging-via-ohci1394.txt - - how to use firewire like a hardware debugger memory reader. -dell_rbu.txt - - document demonstrating the use of the Dell Remote BIOS Update driver. -dev-tools/ - - directory with info on development tools for the kernel. -device-mapper/ - - directory with info on Device Mapper. -dmaengine/ - - the DMA engine and controller API guides. -devicetree/ - - directory with info on device tree files used by OF/PowerPC/ARM -digsig.txt - -info on the Digital Signature Verification API -dma-buf-sharing.txt - - the DMA Buffer Sharing API Guide -docutils.conf - - nothing here. Just a configuration file for docutils. -dontdiff - - file containing a list of files that should never be diff'ed. -driver-api/ - - the Linux driver implementer's API guide. -driver-model/ - - directory with info about Linux driver model. -early-userspace/ - - info about initramfs, klibc, and userspace early during boot. -efi-stub.txt - - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems. -eisa.txt - - info on EISA bus support. -extcon/ - - directory with porting guide for Android kernel switch driver. -isa.txt - - info on EISA bus support. -fault-injection/ - - dir with docs about the fault injection capabilities infrastructure. -fb/ - - directory with info on the frame buffer graphics abstraction layer. -features/ - - status of feature implementation on different architectures. -filesystems/ - - info on the vfs and the various filesystems that Linux supports. -firmware_class/ - - request_firmware() hotplug interface info. -flexible-arrays.txt - - how to make use of flexible sized arrays in linux -fmc/ - - information about the FMC bus abstraction -fpga/ - - FPGA Manager Core. -futex-requeue-pi.txt - - info on requeueing of tasks from a non-PI futex to a PI futex -gcc-plugins.txt - - GCC plugin infrastructure. -gpio/ - - gpio related documentation -gpu/ - - directory with information on GPU driver developer's guide. -hid/ - - directory with information on human interface devices -highuid.txt - - notes on the change from 16 bit to 32 bit user/group IDs. -hwspinlock.txt - - hardware spinlock provides hardware assistance for synchronization -timers/ - - info on the timer related topics -hw_random.txt - - info on Linux support for random number generator in i8xx chipsets. -hwmon/ - - directory with docs on various hardware monitoring drivers. -i2c/ - - directory with info about the I2C bus/protocol (2 wire, kHz speed). -x86/i386/ - - directory with info about Linux on Intel 32 bit architecture. -ia64/ - - directory with info about Linux on Intel 64 bit architecture. -ide/ - - Information regarding the Enhanced IDE drive. -iio/ - - info on industrial IIO configfs support. -index.rst - - main index for the documentation at ReST format. -infiniband/ - - directory with documents concerning Linux InfiniBand support. -input/ - - info on Linux input device support. -intel_txt.txt - - info on intel Trusted Execution Technology (intel TXT). -io-mapping.txt - - description of io_mapping functions in linux/io-mapping.h -io_ordering.txt - - info on ordering I/O writes to memory-mapped addresses. -ioctl/ - - directory with documents describing various IOCTL calls. -iostats.txt - - info on I/O statistics Linux kernel provides. -irqflags-tracing.txt - - how to use the irq-flags tracing feature. -isapnp.txt - - info on Linux ISA Plug & Play support. -isdn/ - - directory with info on the Linux ISDN support, and supported cards. -kbuild/ - - directory with info about the kernel build process. -kdump/ - - directory with mini HowTo on getting the crash dump code to work. -doc-guide/ - - how to write and format reStructuredText kernel documentation -kernel-per-CPU-kthreads.txt - - List of all per-CPU kthreads and how they introduce jitter. -kobject.txt - - info of the kobject infrastructure of the Linux kernel. -kprobes.txt - - documents the kernel probes debugging feature. -kref.txt - - docs on adding reference counters (krefs) to kernel objects. -laptops/ - - directory with laptop related info and laptop driver documentation. -ldm.txt - - a brief description of LDM (Windows Dynamic Disks). -leds/ - - directory with info about LED handling under Linux. -livepatch/ - - info on kernel live patching. -locking/ - - directory with info about kernel locking primitives -lockup-watchdogs.txt - - info on soft and hard lockup detectors (aka nmi_watchdog). -logo.gif - - full colour GIF image of Linux logo (penguin - Tux). -logo.txt - - info on creator of above logo & site to get additional images from. -lsm.txt - - Linux Security Modules: General Security Hooks for Linux -lzo.txt - - kernel LZO decompressor input formats -m68k/ - - directory with info about Linux on Motorola 68k architecture. -mailbox.txt - - How to write drivers for the common mailbox framework (IPC). -md/ - - directory with info about Linux Software RAID -media/ - - info on media drivers: uAPI, kAPI and driver documentation. -memory-barriers.txt - - info on Linux kernel memory barriers. -memory-devices/ - - directory with info on parts like the Texas Instruments EMIF driver -memory-hotplug.txt - - Hotpluggable memory support, how to use and current status. -men-chameleon-bus.txt - - info on MEN chameleon bus. -mic/ - - Intel Many Integrated Core (MIC) architecture device driver. -mips/ - - directory with info about Linux on MIPS architecture. -misc-devices/ - - directory with info about devices using the misc dev subsystem -mmc/ - - directory with info about the MMC subsystem -mtd/ - - directory with info about memory technology devices (flash) -namespaces/ - - directory with various information about namespaces -netlabel/ - - directory with information on the NetLabel subsystem. -networking/ - - directory with info on various aspects of networking with Linux. -nfc/ - - directory relating info about Near Field Communications support. -nios2/ - - Linux on the Nios II architecture. -nommu-mmap.txt - - documentation about no-mmu memory mapping support. -numastat.txt - - info on how to read Numa policy hit/miss statistics in sysfs. -ntb.txt - - info on Non-Transparent Bridge (NTB) drivers. -nvdimm/ - - info on non-volatile devices. -nvmem/ - - info on non volatile memory framework. -output/ - - default directory where html/LaTeX/pdf files will be written. -padata.txt - - An introduction to the "padata" parallel execution API -parisc/ - - directory with info on using Linux on PA-RISC architecture. -parport-lowlevel.txt - - description and usage of the low level parallel port functions. -pcmcia/ - - info on the Linux PCMCIA driver. -percpu-rw-semaphore.txt - - RCU based read-write semaphore optimized for locking for reading -perf/ - - info about the APM X-Gene SoC Performance Monitoring Unit (PMU). -phy/ - - ino on Samsung USB 2.0 PHY adaptation layer. -phy.txt - - Description of the generic PHY framework. -pi-futex.txt - - documentation on lightweight priority inheritance futexes. -pinctrl.txt - - info on pinctrl subsystem and the PINMUX/PINCONF and drivers -platform/ - - List of supported hardware by compal and Dell laptop. -pnp.txt - - Linux Plug and Play documentation. -power/ - - directory with info on Linux PCI power management. -powerpc/ - - directory with info on using Linux with the PowerPC. -prctl/ - - directory with info on the priveledge control subsystem -preempt-locking.txt - - info on locking under a preemptive kernel. -process/ - - how to work with the mainline kernel development process. -pps/ - - directory with information on the pulse-per-second support -pti/ - - directory with info on Intel MID PTI. -ptp/ - - directory with info on support for IEEE 1588 PTP clocks in Linux. -pwm.txt - - info on the pulse width modulation driver subsystem -rapidio/ - - directory with info on RapidIO packet-based fabric interconnect -rbtree.txt - - info on what red-black trees are and what they are for. -remoteproc.txt - - info on how to handle remote processor (e.g. AMP) offloads/usage. -rfkill.txt - - info on the radio frequency kill switch subsystem/support. -robust-futex-ABI.txt - - documentation of the robust futex ABI. -robust-futexes.txt - - a description of what robust futexes are. -rpmsg.txt - - info on the Remote Processor Messaging (rpmsg) Framework -rtc.txt - - notes on how to use the Real Time Clock (aka CMOS clock) driver. -s390/ - - directory with info on using Linux on the IBM S390. -scheduler/ - - directory with info on the scheduler. -scsi/ - - directory with info on Linux scsi support. -security/ - - directory that contains security-related info -serial/ - - directory with info on the low level serial API. -sgi-ioc4.txt - - description of the SGI IOC4 PCI (multi function) device. -sh/ - - directory with info on porting Linux to a new architecture. -smsc_ece1099.txt - -info on the smsc Keyboard Scan Expansion/GPIO Expansion device. -sound/ - - directory with info on sound card support. -spi/ - - overview of Linux kernel Serial Peripheral Interface (SPI) support. -sphinx/ - - no documentation here, just files required by Sphinx toolchain. -sphinx-static/ - - no documentation here, just files required by Sphinx toolchain. -static-keys.txt - - info on how static keys allow debug code in hotpaths via patching -svga.txt - - short guide on selecting video modes at boot via VGA BIOS. -sync_file.txt - - Sync file API guide. -sysctl/ - - directory with info on the /proc/sys/* files. -target/ - - directory with info on generating TCM v4 fabric .ko modules -tee.txt - - info on the TEE subsystem and drivers -this_cpu_ops.txt - - List rationale behind and the way to use this_cpu operations. -thermal/ - - directory with information on managing thermal issues (CPU/temp) -trace/ - - directory with info on tracing technologies within linux -translations/ - - translations of this document from English to another language -unaligned-memory-access.txt - - info on how to avoid arch breaking unaligned memory access in code. -unshare.txt - - description of the Linux unshare system call. -usb/ - - directory with info regarding the Universal Serial Bus. -vfio.txt - - info on Virtual Function I/O used in guest/hypervisor instances. -video-output.txt - - sysfs class driver interface to enable/disable a video output device. -virtual/ - - directory with information on the various linux virtualizations. -vm/ - - directory with info on the Linux vm code. -w1/ - - directory with documents regarding the 1-wire (w1) subsystem. -watchdog/ - - how to auto-reboot Linux if it has "fallen and can't get up". ;-) -wimax/ - - directory with info about Intel Wireless Wimax Connections -core-api/workqueue.rst - - information on the Concurrency Managed Workqueue implementation -x86/x86_64/ - - directory with info on Linux support for AMD x86-64 (Hammer) machines. -xillybus.txt - - Overview and basic ui of xillybus driver -xtensa/ - - directory with documents relating to arch/xtensa port/implementation -xz.txt - - how to make use of the XZ data compression within linux kernel -zorro.txt - - info on writing drivers for Zorro bus devices found on Amigas. diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX deleted file mode 100644 index 206b1d5c1e7111..00000000000000 --- a/Documentation/PCI/00-INDEX +++ /dev/null @@ -1,26 +0,0 @@ -00-INDEX - - this file -acpi-info.txt - - info on how PCI host bridges are represented in ACPI -MSI-HOWTO.txt - - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. -PCIEBUS-HOWTO.txt - - a guide describing the PCI Express Port Bus driver -pci-error-recovery.txt - - info on PCI error recovery -pci-iov-howto.txt - - the PCI Express I/O Virtualization HOWTO -pci.txt - - info on the PCI subsystem for device driver authors -pcieaer-howto.txt - - the PCI Express Advanced Error Reporting Driver Guide HOWTO -endpoint/pci-endpoint.txt - - guide to add endpoint controller driver and endpoint function driver. -endpoint/pci-endpoint-cfs.txt - - guide to use configfs to configure the PCI endpoint function. -endpoint/pci-test-function.txt - - specification of *PCI test* function device. -endpoint/pci-test-howto.txt - - userguide for PCI endpoint test function. -endpoint/function/binding/ - - binding documentation for PCI endpoint function diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX deleted file mode 100644 index f46980c060aad9..00000000000000 --- a/Documentation/RCU/00-INDEX +++ /dev/null @@ -1,34 +0,0 @@ -00-INDEX - - This file -arrayRCU.txt - - Using RCU to Protect Read-Mostly Arrays -checklist.txt - - Review Checklist for RCU Patches -listRCU.txt - - Using RCU to Protect Read-Mostly Linked Lists -lockdep.txt - - RCU and lockdep checking -lockdep-splat.txt - - RCU Lockdep splats explained. -NMI-RCU.txt - - Using RCU to Protect Dynamic NMI Handlers -rcu_dereference.txt - - Proper care and feeding of return values from rcu_dereference() -rcubarrier.txt - - RCU and Unloadable Modules -rculist_nulls.txt - - RCU list primitives for use with SLAB_TYPESAFE_BY_RCU -rcuref.txt - - Reference-count design for elements of lists/arrays protected by RCU -rcu.txt - - RCU Concepts -RTFP.txt - - List of RCU papers (bibliography) going back to 1980. -stallwarn.txt - - RCU CPU stall warnings (module parameter rcu_cpu_stall_suppress) -torture.txt - - RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST) -UP.txt - - RCU on Uniprocessor Systems -whatisRCU.txt - - What is RCU? diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt index 7d4ae110c2c916..721b3e42651553 100644 --- a/Documentation/RCU/rcu.txt +++ b/Documentation/RCU/rcu.txt @@ -87,7 +87,3 @@ o Where can I find more information on RCU? See the RTFP.txt file in this directory. Or point your browser at http://www.rdrop.com/users/paulmck/RCU/. - -o What are all these files in this directory? - - See 00-INDEX for the list. diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index 15ea785b2dfaaa..0797eec76be139 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -51,8 +51,7 @@ Documentation - There are various README files in the Documentation/ subdirectory: these typically contain kernel-specific installation notes for some - drivers for example. See Documentation/00-INDEX for a list of what - is contained in each file. Please read the + drivers for example. Please read the :ref:`Documentation/process/changes.rst ` file, as it contains information about the problems, which may result by upgrading your kernel. diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX deleted file mode 100644 index b6e69fd371c4f8..00000000000000 --- a/Documentation/arm/00-INDEX +++ /dev/null @@ -1,50 +0,0 @@ -00-INDEX - - this file -Booting - - requirements for booting -CCN.txt - - Cache Coherent Network ring-bus and perf PMU driver. -Interrupts - - ARM Interrupt subsystem documentation -IXP4xx - - Intel IXP4xx Network processor. -Netwinder - - Netwinder specific documentation -Porting - - Symbol definitions for porting Linux to a new ARM machine. -Setup - - Kernel initialization parameters on ARM Linux -README - - General ARM documentation -SA1100/ - - SA1100 documentation -Samsung-S3C24XX/ - - S3C24XX ARM Linux Overview -SPEAr/ - - ST SPEAr platform Linux Overview -VFP/ - - Release notes for Linux Kernel Vector Floating Point support code -cluster-pm-race-avoidance.txt - - Algorithm for CPU and Cluster setup/teardown -empeg/ - - Ltd's Empeg MP3 Car Audio Player -firmware.txt - - Secure firmware registration and calling. -kernel_mode_neon.txt - - How to use NEON instructions in kernel mode -kernel_user_helpers.txt - - Helper functions in kernel space made available for userspace. -mem_alignment - - alignment abort handler documentation -memory.txt - - description of the virtual memory layout -nwfpe/ - - NWFPE floating point emulator documentation -swp_emulation - - SWP/SWPB emulation handler/logging description -tcm.txt - - ARM Tightly Coupled Memory -uefi.txt - - [U]EFI configuration and runtime services documentation -vlocks.txt - - Voting locks, low-level mechanism relying on memory system atomic writes. diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX deleted file mode 100644 index 8d55b4bbb5e2ef..00000000000000 --- a/Documentation/block/00-INDEX +++ /dev/null @@ -1,34 +0,0 @@ -00-INDEX - - This file -bfq-iosched.txt - - BFQ IO scheduler and its tunables -biodoc.txt - - Notes on the Generic Block Layer Rewrite in Linux 2.5 -biovecs.txt - - Immutable biovecs and biovec iterators -capability.txt - - Generic Block Device Capability (/sys/block//capability) -cfq-iosched.txt - - CFQ IO scheduler tunables -cmdline-partition.txt - - how to specify block device partitions on kernel command line -data-integrity.txt - - Block data integrity -deadline-iosched.txt - - Deadline IO scheduler tunables -ioprio.txt - - Block io priorities (in CFQ scheduler) -pr.txt - - Block layer support for Persistent Reservations -null_blk.txt - - Null block for block-layer benchmarking. -queue-sysfs.txt - - Queue's sysfs entries -request.txt - - The members of struct request (in include/linux/blkdev.h) -stat.txt - - Block layer statistics in /sys/block//stat -switching-sched.txt - - Switching I/O schedulers at runtime -writeback_cache_control.txt - - Control of volatile write back caches diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX deleted file mode 100644 index c08df56dd91bdd..00000000000000 --- a/Documentation/blockdev/00-INDEX +++ /dev/null @@ -1,18 +0,0 @@ -00-INDEX - - this file -README.DAC960 - - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. -cciss.txt - - info, major/minor #'s for Compaq's SMART Array Controllers. -cpqarray.txt - - info on using Compaq's SMART2 Intelligent Disk Array Controllers. -floppy.txt - - notes and driver options for the floppy disk driver. -mflash.txt - - info on mGine m(g)flash driver for linux. -nbd.txt - - info on a TCP implementation of a network block device. -paride.txt - - information about the parallel port IDE subsystem. -ramdisk.txt - - short guide on how to set up and use the RAM disk. diff --git a/Documentation/cdrom/00-INDEX b/Documentation/cdrom/00-INDEX deleted file mode 100644 index 433edf23dc4970..00000000000000 --- a/Documentation/cdrom/00-INDEX +++ /dev/null @@ -1,11 +0,0 @@ -00-INDEX - - this file (info on CD-ROMs and Linux) -Makefile - - only used to generate TeX output from the documentation. -cdrom-standard.tex - - LaTeX document on standardizing the CD-ROM programming interface. -ide-cd - - info on setting up and using ATAPI (aka IDE) CD-ROMs. -packet-writing.txt - - Info on the CDRW packet writing module - diff --git a/Documentation/cgroup-v1/00-INDEX b/Documentation/cgroup-v1/00-INDEX deleted file mode 100644 index 13e0c85e7b3571..00000000000000 --- a/Documentation/cgroup-v1/00-INDEX +++ /dev/null @@ -1,26 +0,0 @@ -00-INDEX - - this file -blkio-controller.txt - - Description for Block IO Controller, implementation and usage details. -cgroups.txt - - Control Groups definition, implementation details, examples and API. -cpuacct.txt - - CPU Accounting Controller; account CPU usage for groups of tasks. -cpusets.txt - - documents the cpusets feature; assign CPUs and Mem to a set of tasks. -admin-guide/devices.rst - - Device Whitelist Controller; description, interface and security. -freezer-subsystem.txt - - checkpointing; rationale to not use signals, interface. -hugetlb.txt - - HugeTLB Controller implementation and usage details. -memcg_test.txt - - Memory Resource Controller; implementation details. -memory.txt - - Memory Resource Controller; design, accounting, interface, testing. -net_cls.txt - - Network classifier cgroups details and usages. -net_prio.txt - - Network priority cgroups details and usages. -pids.txt - - Process number cgroups details and usages. diff --git a/Documentation/devicetree/00-INDEX b/Documentation/devicetree/00-INDEX deleted file mode 100644 index 8c4102c6a5e77b..00000000000000 --- a/Documentation/devicetree/00-INDEX +++ /dev/null @@ -1,12 +0,0 @@ -Documentation for device trees, a data structure by which bootloaders pass -hardware layout to Linux in a device-independent manner, simplifying hardware -probing. This subsystem is maintained by Grant Likely - and has a mailing list at -https://lists.ozlabs.org/listinfo/devicetree-discuss - -00-INDEX - - this file -booting-without-of.txt - - Booting Linux without Open Firmware, describes history and format of device trees. -usage-model.txt - - How Linux uses DT and what DT aims to solve. \ No newline at end of file diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX deleted file mode 100644 index fe85e7c5907a54..00000000000000 --- a/Documentation/fb/00-INDEX +++ /dev/null @@ -1,75 +0,0 @@ -Index of files in Documentation/fb. If you think something about frame -buffer devices needs an entry here, needs correction or you've written one -please mail me. - Geert Uytterhoeven - -00-INDEX - - this file. -api.txt - - The frame buffer API between applications and buffer devices. -arkfb.txt - - info on the fbdev driver for ARK Logic chips. -aty128fb.txt - - info on the ATI Rage128 frame buffer driver. -cirrusfb.txt - - info on the driver for Cirrus Logic chipsets. -cmap_xfbdev.txt - - an introduction to fbdev's cmap structures. -deferred_io.txt - - an introduction to deferred IO. -efifb.txt - - info on the EFI platform driver for Intel based Apple computers. -ep93xx-fb.txt - - info on the driver for EP93xx LCD controller. -fbcon.txt - - intro to and usage guide for the framebuffer console (fbcon). -framebuffer.txt - - introduction to frame buffer devices. -gxfb.txt - - info on the framebuffer driver for AMD Geode GX2 based processors. -intel810.txt - - documentation for the Intel 810/815 framebuffer driver. -intelfb.txt - - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. -internals.txt - - quick overview of frame buffer device internals. -lxfb.txt - - info on the framebuffer driver for AMD Geode LX based processors. -matroxfb.txt - - info on the Matrox framebuffer driver for Alpha, Intel and PPC. -metronomefb.txt - - info on the driver for the Metronome display controller. -modedb.txt - - info on the video mode database. -pvr2fb.txt - - info on the PowerVR 2 frame buffer driver. -pxafb.txt - - info on the driver for the PXA25x LCD controller. -s3fb.txt - - info on the fbdev driver for S3 Trio/Virge chips. -sa1100fb.txt - - information about the driver for the SA-1100 LCD controller. -sh7760fb.txt - - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. -sisfb.txt - - info on the framebuffer device driver for various SiS chips. -sm501.txt - - info on the framebuffer device driver for sm501 videoframebuffer. -sstfb.txt - - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. -tgafb.txt - - info on the TGA (DECChip 21030) frame buffer driver. -tridentfb.txt - info on the framebuffer driver for some Trident chip based cards. -udlfb.txt - - Driver for DisplayLink USB 2.0 chips. -uvesafb.txt - - info on the userspace VESA (VBE2+ compliant) frame buffer device. -vesafb.txt - - info on the VESA frame buffer device. -viafb.modes - - list of modes for VIA Integration Graphic Chip. -viafb.txt - - info on the VIA Integration Graphic Chip console framebuffer driver. -vt8623fb.txt - - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX deleted file mode 100644 index 0937bade1099d6..00000000000000 --- a/Documentation/filesystems/00-INDEX +++ /dev/null @@ -1,153 +0,0 @@ -00-INDEX - - this file (info on some of the filesystems supported by linux). -Locking - - info on locking rules as they pertain to Linux VFS. -9p.txt - - 9p (v9fs) is an implementation of the Plan 9 remote fs protocol. -adfs.txt - - info and mount options for the Acorn Advanced Disc Filing System. -afs.txt - - info and examples for the distributed AFS (Andrew File System) fs. -affs.txt - - info and mount options for the Amiga Fast File System. -autofs-mount-control.txt - - info on device control operations for autofs module. -automount-support.txt - - information about filesystem automount support. -befs.txt - - information about the BeOS filesystem for Linux. -bfs.txt - - info for the SCO UnixWare Boot Filesystem (BFS). -btrfs.txt - - info for the BTRFS filesystem. -caching/ - - directory containing filesystem cache documentation. -ceph.txt - - info for the Ceph Distributed File System. -cifs/ - - directory containing CIFS filesystem documentation and example code. -coda.txt - - description of the CODA filesystem. -configfs/ - - directory containing configfs documentation and example code. -cramfs.txt - - info on the cram filesystem for small storage (ROMs etc). -dax.txt - - info on avoiding the page cache for files stored on CPU-addressable - storage devices. -debugfs.txt - - info on the debugfs filesystem. -devpts.txt - - info on the devpts filesystem. -directory-locking - - info about the locking scheme used for directory operations. -dlmfs.txt - - info on the userspace interface to the OCFS2 DLM. -dnotify.txt - - info about directory notification in Linux. -dnotify_test.c - - example program for dnotify. -ecryptfs.txt - - docs on eCryptfs: stacked cryptographic filesystem for Linux. -efivarfs.txt - - info for the efivarfs filesystem. -exofs.txt - - info, usage, mount options, design about EXOFS. -ext2.txt - - info, mount options and specifications for the Ext2 filesystem. -ext3.txt - - info, mount options and specifications for the Ext3 filesystem. -ext4.txt - - info, mount options and specifications for the Ext4 filesystem. -f2fs.txt - - info and mount options for the F2FS filesystem. -fiemap.txt - - info on fiemap ioctl. -files.txt - - info on file management in the Linux kernel. -fuse.txt - - info on the Filesystem in User SpacE including mount options. -gfs2-glocks.txt - - info on the Global File System 2 - Glock internal locking rules. -gfs2-uevents.txt - - info on the Global File System 2 - uevents. -gfs2.txt - - info on the Global File System 2. -hfs.txt - - info on the Macintosh HFS Filesystem for Linux. -hfsplus.txt - - info on the Macintosh HFSPlus Filesystem for Linux. -hpfs.txt - - info and mount options for the OS/2 HPFS. -inotify.txt - - info on the powerful yet simple file change notification system. -isofs.txt - - info and mount options for the ISO 9660 (CDROM) filesystem. -jfs.txt - - info and mount options for the JFS filesystem. -locks.txt - - info on file locking implementations, flock() vs. fcntl(), etc. -mandatory-locking.txt - - info on the Linux implementation of Sys V mandatory file locking. -nfs/ - - nfs-related documentation. -nilfs2.txt - - info and mount options for the NILFS2 filesystem. -ntfs.txt - - info and mount options for the NTFS filesystem (Windows NT). -ocfs2.txt - - info and mount options for the OCFS2 clustered filesystem. -omfs.txt - - info on the Optimized MPEG FileSystem. -path-lookup.txt - - info on path walking and name lookup locking. -pohmelfs/ - - directory containing pohmelfs filesystem documentation. -porting - - various information on filesystem porting. -proc.txt - - info on Linux's /proc filesystem. -qnx6.txt - - info on the QNX6 filesystem. -quota.txt - - info on Quota subsystem. -ramfs-rootfs-initramfs.txt - - info on the 'in memory' filesystems ramfs, rootfs and initramfs. -relay.txt - - info on relay, for efficient streaming from kernel to user space. -romfs.txt - - description of the ROMFS filesystem. -seq_file.txt - - how to use the seq_file API. -sharedsubtree.txt - - a description of shared subtrees for namespaces. -spufs.txt - - info and mount options for the SPU filesystem used on Cell. -squashfs.txt - - info on the squashfs filesystem. -sysfs-pci.txt - - info on accessing PCI device resources through sysfs. -sysfs-tagging.txt - - info on sysfs tagging to avoid duplicates. -sysfs.txt - - info on sysfs, a ram-based filesystem for exporting kernel objects. -sysv-fs.txt - - info on the SystemV/V7/Xenix/Coherent filesystem. -tmpfs.txt - - info on tmpfs, a filesystem that holds all files in virtual memory. -ubifs.txt - - info on the Unsorted Block Images FileSystem. -udf.txt - - info and mount options for the UDF filesystem. -ufs.txt - - info on the ufs filesystem. -vfat.txt - - info on using the VFAT filesystem used in Windows NT and Windows 95. -vfs.txt - - overview of the Virtual File System. -xfs-delayed-logging-design.txt - - info on the XFS Delayed Logging Design. -xfs-self-describing-metadata.txt - - info on XFS Self Describing Metadata. -xfs.txt - - info and mount options for the XFS filesystem. diff --git a/Documentation/filesystems/nfs/00-INDEX b/Documentation/filesystems/nfs/00-INDEX deleted file mode 100644 index 53f3b596ac0dd9..00000000000000 --- a/Documentation/filesystems/nfs/00-INDEX +++ /dev/null @@ -1,26 +0,0 @@ -00-INDEX - - this file (nfs-related documentation). -Exporting - - explanation of how to make filesystems exportable. -fault_injection.txt - - information for using fault injection on the server -knfsd-stats.txt - - statistics which the NFS server makes available to user space. -nfs.txt - - nfs client, and DNS resolution for fs_locations. -nfs41-server.txt - - info on the Linux server implementation of NFSv4 minor version 1. -nfs-rdma.txt - - how to install and setup the Linux NFS/RDMA client and server software -nfsd-admin-interfaces.txt - - Administrative interfaces for nfsd. -nfsroot.txt - - short guide on setting up a diskless box with NFS root filesystem. -pnfs.txt - - short explanation of some of the internals of the pnfs client code -rpc-cache.txt - - introduction to the caching mechanisms in the sunrpc layer. -idmapper.txt - - information for configuring request-keys to be used by idmapper -rpc-server-gss.txt - - Information on GSS authentication support in the NFS Server diff --git a/Documentation/fmc/00-INDEX b/Documentation/fmc/00-INDEX deleted file mode 100644 index 431c69570f43f5..00000000000000 --- a/Documentation/fmc/00-INDEX +++ /dev/null @@ -1,38 +0,0 @@ - -Documentation in this directory comes from sections of the manual we -wrote for the externally-developed fmc-bus package. The complete -manual as of today (2013-02) is available in PDF format at -http://www.ohwr.org/projects/fmc-bus/files - -00-INDEX - - this file. - -FMC-and-SDB.txt - - What are FMC and SDB, basic concepts for this framework - -API.txt - - The functions that are exported by the bus driver - -parameters.txt - - The module parameters - -carrier.txt - - writing a carrier (a device) - -mezzanine.txt - - writing code for your mezzanine (a driver) - -identifiers.txt - - how identification and matching works - -fmc-fakedev.txt - - about drivers/fmc/fmc-fakedev.ko - -fmc-trivial.txt - - about drivers/fmc/fmc-trivial.ko - -fmc-write-eeprom.txt - - about drivers/fmc/fmc-write-eeprom.ko - -fmc-chardev.txt - - about drivers/fmc/fmc-chardev.ko diff --git a/Documentation/gpio/00-INDEX b/Documentation/gpio/00-INDEX deleted file mode 100644 index 17e19a68058f08..00000000000000 --- a/Documentation/gpio/00-INDEX +++ /dev/null @@ -1,4 +0,0 @@ -00-INDEX - - This file -sysfs.txt - - Information about the GPIO sysfs interface diff --git a/Documentation/ide/00-INDEX b/Documentation/ide/00-INDEX deleted file mode 100644 index 22f98ca79539d5..00000000000000 --- a/Documentation/ide/00-INDEX +++ /dev/null @@ -1,14 +0,0 @@ -00-INDEX - - this file -ChangeLog.ide-cd.1994-2004 - - ide-cd changelog -ChangeLog.ide-floppy.1996-2002 - - ide-floppy changelog -ChangeLog.ide-tape.1995-2002 - - ide-tape changelog -ide-tape.txt - - info on the IDE ATAPI streaming tape driver -ide.txt - - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS). -warm-plug-howto.txt - - using sysfs to remove and add IDE devices. \ No newline at end of file diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX deleted file mode 100644 index c1a9257879500f..00000000000000 --- a/Documentation/ioctl/00-INDEX +++ /dev/null @@ -1,12 +0,0 @@ -00-INDEX - - this file -botching-up-ioctls.txt - - how to avoid botching up ioctls -cdrom.txt - - summary of CDROM ioctl calls -hdio.txt - - summary of HDIO_ ioctl calls -ioctl-decoding.txt - - how to decode the bits of an IOCTL code -ioctl-number.txt - - how to implement and register device/driver ioctl calls diff --git a/Documentation/isdn/00-INDEX b/Documentation/isdn/00-INDEX deleted file mode 100644 index 2d1889b6c1fa81..00000000000000 --- a/Documentation/isdn/00-INDEX +++ /dev/null @@ -1,42 +0,0 @@ -00-INDEX - - this file (info on ISDN implementation for Linux) -CREDITS - - list of the kind folks that brought you this stuff. -HiSax.cert - - information about the ITU approval certification of the HiSax driver. -INTERFACE - - description of isdn4linux Link Level and Hardware Level interfaces. -INTERFACE.fax - - description of the fax subinterface of isdn4linux. -INTERFACE.CAPI - - description of kernel CAPI Link Level to Hardware Level interface. -README - - general info on what you need and what to do for Linux ISDN. -README.FAQ - - general info for FAQ. -README.HiSax - - info on the HiSax driver which replaces the old teles. -README.audio - - info for running audio over ISDN. -README.avmb1 - - info on driver for AVM-B1 ISDN card. -README.concap - - info on "CONCAP" encapsulation protocol interface used for X.25. -README.diversion - - info on module for isdn diversion services. -README.fax - - info for using Fax over ISDN. -README.gigaset - - info on the drivers for Siemens Gigaset ISDN adapters -README.hfc-pci - - info on hfc-pci based cards. -README.hysdn - - info on driver for Hypercope active HYSDN cards -README.mISDN - - info on the Modular ISDN subsystem (mISDN) -README.syncppp - - info on running Sync PPP over ISDN. -README.x25 - - info for running X.25 over ISDN. -syncPPP.FAQ - - frequently asked questions about running PPP over ISDN. diff --git a/Documentation/kbuild/00-INDEX b/Documentation/kbuild/00-INDEX deleted file mode 100644 index 8c5e6aa78004ab..00000000000000 --- a/Documentation/kbuild/00-INDEX +++ /dev/null @@ -1,14 +0,0 @@ -00-INDEX - - this file: info on the kernel build process -headers_install.txt - - how to export Linux headers for use by userspace -kbuild.txt - - developer information on kbuild -kconfig.txt - - usage help for make *config -kconfig-language.txt - - specification of Config Language, the language in Kconfig files -makefiles.txt - - developer information for linux kernel makefiles -modules.txt - - how to build modules and to install them diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX deleted file mode 100644 index 86169dc766f7b1..00000000000000 --- a/Documentation/laptops/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - This file -asus-laptop.txt - - information on the Asus Laptop Extras driver. -disk-shock-protection.txt - - information on hard disk shock protection. -laptop-mode.txt - - how to conserve battery power using laptop-mode. -sony-laptop.txt - - Sony Notebook Control Driver (SNC) Readme. -sonypi.txt - - info on Linux Sony Programmable I/O Device support. -thinkpad-acpi.txt - - information on the (IBM and Lenovo) ThinkPad ACPI Extras driver. -toshiba_haps.txt - - information on the Toshiba HDD Active Protection Sensor driver. diff --git a/Documentation/leds/00-INDEX b/Documentation/leds/00-INDEX deleted file mode 100644 index ae626b29a74023..00000000000000 --- a/Documentation/leds/00-INDEX +++ /dev/null @@ -1,32 +0,0 @@ -00-INDEX - - This file -leds-blinkm.txt - - Driver for BlinkM LED-devices. -leds-class.txt - - documents LED handling under Linux. -leds-class-flash.txt - - documents flash LED handling under Linux. -leds-lm3556.txt - - notes on how to use the leds-lm3556 driver. -leds-lp3944.txt - - notes on how to use the leds-lp3944 driver. -leds-lp5521.txt - - notes on how to use the leds-lp5521 driver. -leds-lp5523.txt - - notes on how to use the leds-lp5523 driver. -leds-lp5562.txt - - notes on how to use the leds-lp5562 driver. -leds-lp55xx.txt - - description about lp55xx common driver. -leds-lm3556.txt - - notes on how to use the leds-lm3556 driver. -leds-mlxcpld.txt - - notes on how to use the leds-mlxcpld driver. -ledtrig-oneshot.txt - - One-shot LED trigger for both sporadic and dense events. -ledtrig-transient.txt - - LED Transient Trigger, one shot timer activation. -ledtrig-usbport.txt - - notes on how to use the drivers/usb/core/ledtrig-usbport.c trigger. -uleds.txt - - notes on how to use the uleds driver. diff --git a/Documentation/locking/00-INDEX b/Documentation/locking/00-INDEX deleted file mode 100644 index c256c9bee2a4d8..00000000000000 --- a/Documentation/locking/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - this file. -lockdep-design.txt - - documentation on the runtime locking correctness validator. -lockstat.txt - - info on collecting statistics on locks (and contention). -mutex-design.txt - - info on the generic mutex subsystem. -rt-mutex-design.txt - - description of the RealTime mutex implementation design. -rt-mutex.txt - - desc. of RT-mutex subsystem with PI (Priority Inheritance) support. -spinlocks.txt - - info on using spinlocks to provide exclusive access in kernel. -ww-mutex-design.txt - - Intro to Mutex wait/would deadlock handling.s diff --git a/Documentation/m68k/00-INDEX b/Documentation/m68k/00-INDEX deleted file mode 100644 index 2be8c6b00e7464..00000000000000 --- a/Documentation/m68k/00-INDEX +++ /dev/null @@ -1,7 +0,0 @@ -00-INDEX - - this file -README.buddha - - Amiga Buddha and Catweasel IDE Driver -kernel-options.txt - - command line options for Linux/m68k - diff --git a/Documentation/mips/00-INDEX b/Documentation/mips/00-INDEX deleted file mode 100644 index 8ae9cffc226234..00000000000000 --- a/Documentation/mips/00-INDEX +++ /dev/null @@ -1,4 +0,0 @@ -00-INDEX - - this file. -AU1xxx_IDE.README - - README for MIPS AU1XXX IDE driver. diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX deleted file mode 100644 index 4623bc0aa0bb49..00000000000000 --- a/Documentation/mmc/00-INDEX +++ /dev/null @@ -1,10 +0,0 @@ -00-INDEX - - this file -mmc-dev-attrs.txt - - info on SD and MMC device attributes -mmc-dev-parts.txt - - info on SD and MMC device partitions -mmc-async-req.txt - - info on mmc asynchronous requests -mmc-tools.txt - - info on mmc-utils tools diff --git a/Documentation/netlabel/00-INDEX b/Documentation/netlabel/00-INDEX deleted file mode 100644 index 837bf35990e282..00000000000000 --- a/Documentation/netlabel/00-INDEX +++ /dev/null @@ -1,10 +0,0 @@ -00-INDEX - - this file. -cipso_ipv4.txt - - documentation on the IPv4 CIPSO protocol engine. -draft-ietf-cipso-ipsecurity-01.txt - - IETF draft of the CIPSO protocol, dated 16 July 1992. -introduction.txt - - NetLabel introduction, READ THIS FIRST. -lsm_interface.txt - - documentation on the NetLabel kernel security module API. diff --git a/Documentation/netlabel/cipso_ipv4.txt b/Documentation/netlabel/cipso_ipv4.txt index 93dacb132c3c12..a6075481fd60e6 100644 --- a/Documentation/netlabel/cipso_ipv4.txt +++ b/Documentation/netlabel/cipso_ipv4.txt @@ -6,11 +6,12 @@ May 17, 2006 * Overview -The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial IP -Security Option (CIPSO) draft from July 16, 1992. A copy of this draft can be -found in this directory, consult '00-INDEX' for the filename. While the IETF -draft never made it to an RFC standard it has become a de-facto standard for -labeled networking and is used in many trusted operating systems. +The NetLabel CIPSO/IPv4 protocol engine is based on the IETF Commercial +IP Security Option (CIPSO) draft from July 16, 1992. A copy of this +draft can be found in this directory +(draft-ietf-cipso-ipsecurity-01.txt). While the IETF draft never made +it to an RFC standard it has become a de-facto standard for labeled +networking and is used in many trusted operating systems. * Outbound Packet Processing diff --git a/Documentation/netlabel/introduction.txt b/Documentation/netlabel/introduction.txt index 5ecd8d1dcf4e5d..3caf77bcff0f64 100644 --- a/Documentation/netlabel/introduction.txt +++ b/Documentation/netlabel/introduction.txt @@ -22,7 +22,7 @@ refrain from calling the protocol engines directly, instead they should use the NetLabel kernel security module API described below. Detailed information about each NetLabel protocol engine can be found in this -directory, consult '00-INDEX' for filenames. +directory. * Communication Layer diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX deleted file mode 100644 index 02a323c432612c..00000000000000 --- a/Documentation/networking/00-INDEX +++ /dev/null @@ -1,234 +0,0 @@ -00-INDEX - - this file -3c509.txt - - information on the 3Com Etherlink III Series Ethernet cards. -6pack.txt - - info on the 6pack protocol, an alternative to KISS for AX.25 -LICENSE.qla3xxx - - GPLv2 for QLogic Linux Networking HBA Driver -LICENSE.qlge - - GPLv2 for QLogic Linux qlge NIC Driver -LICENSE.qlcnic - - GPLv2 for QLogic Linux qlcnic NIC Driver -PLIP.txt - - PLIP: The Parallel Line Internet Protocol device driver -README.ipw2100 - - README for the Intel PRO/Wireless 2100 driver. -README.ipw2200 - - README for the Intel PRO/Wireless 2915ABG and 2200BG driver. -README.sb1000 - - info on General Instrument/NextLevel SURFboard1000 cable modem. -altera_tse.txt - - Altera Triple-Speed Ethernet controller. -arcnet-hardware.txt - - tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc. -arcnet.txt - - info on the using the ARCnet driver itself. -atm.txt - - info on where to get ATM programs and support for Linux. -ax25.txt - - info on using AX.25 and NET/ROM code for Linux -baycom.txt - - info on the driver for Baycom style amateur radio modems -bonding.txt - - Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux. -bridge.txt - - where to get user space programs for ethernet bridging with Linux. -cdc_mbim.txt - - 3G/LTE USB modem (Mobile Broadband Interface Model) -checksum-offloads.txt - - Explanation of checksum offloads; LCO, RCO -cops.txt - - info on the COPS LocalTalk Linux driver -cs89x0.txt - - the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver -cxacru.txt - - Conexant AccessRunner USB ADSL Modem -cxacru-cf.py - - Conexant AccessRunner USB ADSL Modem configuration file parser -cxgb.txt - - Release Notes for the Chelsio N210 Linux device driver. -dccp.txt - - the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42). -dctcp.txt - - DataCenter TCP congestion control -de4x5.txt - - the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver -decnet.txt - - info on using the DECnet networking layer in Linux. -dl2k.txt - - README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko). -dm9000.txt - - README for the Simtec DM9000 Network driver. -dmfe.txt - - info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver. -dns_resolver.txt - - The DNS resolver module allows kernel servies to make DNS queries. -driver.txt - - Softnet driver issues. -ena.txt - - info on Amazon's Elastic Network Adapter (ENA) -e100.txt - - info on Intel's EtherExpress PRO/100 line of 10/100 boards -e1000.txt - - info on Intel's E1000 line of gigabit ethernet boards -e1000e.txt - - README for the Intel Gigabit Ethernet Driver (e1000e). -eql.txt - - serial IP load balancing -fib_trie.txt - - Level Compressed Trie (LC-trie) notes: a structure for routing. -filter.txt - - Linux Socket Filtering -fore200e.txt - - FORE Systems PCA-200E/SBA-200E ATM NIC driver info. -framerelay.txt - - info on using Frame Relay/Data Link Connection Identifier (DLCI). -gen_stats.txt - - Generic networking statistics for netlink users. -generic-hdlc.txt - - The generic High Level Data Link Control (HDLC) layer. -generic_netlink.txt - - info on Generic Netlink -gianfar.txt - - Gianfar Ethernet Driver. -i40e.txt - - README for the Intel Ethernet Controller XL710 Driver (i40e). -i40evf.txt - - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function -ieee802154.txt - - Linux IEEE 802.15.4 implementation, API and drivers -igb.txt - - README for the Intel Gigabit Ethernet Driver (igb). -igbvf.txt - - README for the Intel Gigabit Ethernet Driver (igbvf). -ip-sysctl.txt - - /proc/sys/net/ipv4/* variables -ip_dynaddr.txt - - IP dynamic address hack e.g. for auto-dialup links -ipddp.txt - - AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation -iphase.txt - - Interphase PCI ATM (i)Chip IA Linux driver info. -ipsec.txt - - Note on not compressing IPSec payload and resulting failed policy check. -ipv6.txt - - Options to the ipv6 kernel module. -ipvs-sysctl.txt - - Per-inode explanation of the /proc/sys/net/ipv4/vs interface. -irda.txt - - where to get IrDA (infrared) utilities and info for Linux. -ixgb.txt - - README for the Intel 10 Gigabit Ethernet Driver (ixgb). -ixgbe.txt - - README for the Intel 10 Gigabit Ethernet Driver (ixgbe). -ixgbevf.txt - - README for the Intel Virtual Function (VF) Driver (ixgbevf). -l2tp.txt - - User guide to the L2TP tunnel protocol. -lapb-module.txt - - programming information of the LAPB module. -ltpc.txt - - the Apple or Farallon LocalTalk PC card driver -mac80211-auth-assoc-deauth.txt - - authentication and association / deauth-disassoc with max80211 -mac80211-injection.txt - - HOWTO use packet injection with mac80211 -multiqueue.txt - - HOWTO for multiqueue network device support. -netconsole.txt - - The network console module netconsole.ko: configuration and notes. -netdev-features.txt - - Network interface features API description. -netdevices.txt - - info on network device driver functions exported to the kernel. -netif-msg.txt - - Design of the network interface message level setting (NETIF_MSG_*). -netlink_mmap.txt - - memory mapped I/O with netlink -nf_conntrack-sysctl.txt - - list of netfilter-sysctl knobs. -nfc.txt - - The Linux Near Field Communication (NFS) subsystem. -openvswitch.txt - - Open vSwitch developer documentation. -operstates.txt - - Overview of network interface operational states. -packet_mmap.txt - - User guide to memory mapped packet socket rings (PACKET_[RT]X_RING). -phonet.txt - - The Phonet packet protocol used in Nokia cellular modems. -phy.txt - - The PHY abstraction layer. -pktgen.txt - - User guide to the kernel packet generator (pktgen.ko). -policy-routing.txt - - IP policy-based routing -ppp_generic.txt - - Information about the generic PPP driver. -proc_net_tcp.txt - - Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces. -radiotap-headers.txt - - Background on radiotap headers. -ray_cs.txt - - Raylink Wireless LAN card driver info. -rds.txt - - Background on the reliable, ordered datagram delivery method RDS. -regulatory.txt - - Overview of the Linux wireless regulatory infrastructure. -rxrpc.txt - - Guide to the RxRPC protocol. -s2io.txt - - Release notes for Neterion Xframe I/II 10GbE driver. -scaling.txt - - Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS. -sctp.txt - - Notes on the Linux kernel implementation of the SCTP protocol. -secid.txt - - Explanation of the secid member in flow structures. -skfp.txt - - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. -smc9.txt - - the driver for SMC's 9000 series of Ethernet cards -spider_net.txt - - README for the Spidernet Driver (as found in PS3 / Cell BE). -stmmac.txt - - README for the STMicro Synopsys Ethernet driver. -tc-actions-env-rules.txt - - rules for traffic control (tc) actions. -timestamping.txt - - overview of network packet timestamping variants. -tcp.txt - - short blurb on how TCP output takes place. -tcp-thin.txt - - kernel tuning options for low rate 'thin' TCP streams. -team.txt - - pointer to information for ethernet teaming devices. -tlan.txt - - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info. -tproxy.txt - - Transparent proxy support user guide. -tuntap.txt - - TUN/TAP device driver, allowing user space Rx/Tx of packets. -udplite.txt - - UDP-Lite protocol (RFC 3828) introduction. -vortex.txt - - info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards. -vxge.txt - - README for the Neterion X3100 PCIe Server Adapter. -vxlan.txt - - Virtual extensible LAN overview -x25.txt - - general info on X.25 development. -x25-iface.txt - - description of the X.25 Packet Layer to LAPB device interface. -xfrm_device.txt - - description of XFRM offload API -xfrm_proc.txt - - description of the statistics package for XFRM. -xfrm_sync.txt - - sync patches for XFRM enable migration of an SA between hosts. -xfrm_sysctl.txt - - description of the XFRM configuration options. -z8530drv.txt - - info about Linux driver for Z8530 based HDLC cards for AX.25 diff --git a/Documentation/parisc/00-INDEX b/Documentation/parisc/00-INDEX deleted file mode 100644 index cbd060961f434a..00000000000000 --- a/Documentation/parisc/00-INDEX +++ /dev/null @@ -1,6 +0,0 @@ -00-INDEX - - this file. -debugging - - some debugging hints for real-mode code -registers - - current/planned usage of registers diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX deleted file mode 100644 index 7f3c2def2cac22..00000000000000 --- a/Documentation/power/00-INDEX +++ /dev/null @@ -1,44 +0,0 @@ -00-INDEX - - This file -apm-acpi.txt - - basic info about the APM and ACPI support. -basic-pm-debugging.txt - - Debugging suspend and resume -charger-manager.txt - - Battery charger management. -admin-guide/devices.rst - - How drivers interact with system-wide power management -drivers-testing.txt - - Testing suspend and resume support in device drivers -freezing-of-tasks.txt - - How processes and controlled during suspend -interface.txt - - Power management user interface in /sys/power -opp.txt - - Operating Performance Point library -pci.txt - - How the PCI Subsystem Does Power Management -pm_qos_interface.txt - - info on Linux PM Quality of Service interface -power_supply_class.txt - - Tells userspace about battery, UPS, AC or DC power supply properties -runtime_pm.txt - - Power management framework for I/O devices. -s2ram.txt - - How to get suspend to ram working (and debug it when it isn't) -states.txt - - System power management states -suspend-and-cpuhotplug.txt - - Explains the interaction between Suspend-to-RAM (S3) and CPU hotplug -swsusp-and-swap-files.txt - - Using swap files with software suspend (to disk) -swsusp-dmcrypt.txt - - How to use dm-crypt and software suspend (to disk) together -swsusp.txt - - Goals, implementation, and usage of software suspend (ACPI S3) -tricks.txt - - How to trick software suspend (to disk) into working when it isn't -userland-swsusp.txt - - Experimental implementation of software suspend in userspace -video.txt - - Video issues during resume from suspend diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX deleted file mode 100644 index 9dc845cf7d88c7..00000000000000 --- a/Documentation/powerpc/00-INDEX +++ /dev/null @@ -1,34 +0,0 @@ -Index of files in Documentation/powerpc. If you think something about -Linux/PPC needs an entry here, needs correction or you've written one -please mail me. - Cort Dougan (cort@fsmlabs.com) - -00-INDEX - - this file -bootwrapper.txt - - Information on how the powerpc kernel is wrapped for boot on various - different platforms. -cpu_features.txt - - info on how we support a variety of CPUs with minimal compile-time - options. -cxl.txt - - Overview of the CXL driver. -eeh-pci-error-recovery.txt - - info on PCI Bus EEH Error Recovery -firmware-assisted-dump.txt - - Documentation on the firmware assisted dump mechanism "fadump". -hvcs.txt - - IBM "Hypervisor Virtual Console Server" Installation Guide -mpc52xx.txt - - Linux 2.6.x on MPC52xx family -pmu-ebb.txt - - Description of the API for using the PMU with Event Based Branches. -qe_firmware.txt - - describes the layout of firmware binaries for the Freescale QUICC - Engine and the code that parses and uploads the microcode therein. -ptrace.txt - - Information on the ptrace interfaces for hardware debug registers. -transactional_memory.txt - - Overview of the Power8 transactional memory support. -dscr.txt - - Overview DSCR (Data Stream Control Register) support. diff --git a/Documentation/s390/00-INDEX b/Documentation/s390/00-INDEX deleted file mode 100644 index 317f0378ae01ff..00000000000000 --- a/Documentation/s390/00-INDEX +++ /dev/null @@ -1,28 +0,0 @@ -00-INDEX - - this file. -3270.ChangeLog - - ChangeLog for the UTS Global 3270-support patch (outdated). -3270.txt - - how to use the IBM 3270 display system support. -cds.txt - - s390 common device support (common I/O layer). -CommonIO - - common I/O layer command line parameters, procfs and debugfs entries -config3270.sh - - example configuration for 3270 devices. -DASD - - information on the DASD disk device driver. -Debugging390.txt - - hints for debugging on s390 systems. -driver-model.txt - - information on s390 devices and the driver model. -monreader.txt - - information on accessing the z/VM monitor stream from Linux. -qeth.txt - - HiperSockets Bridge Port Support. -s390dbf.txt - - information on using the s390 debug feature. -vfio-ccw.txt - information on the vfio-ccw I/O subchannel driver. -zfcpdump.txt - - information on the s390 SCSI dump tool. diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX deleted file mode 100644 index eccf7ad2e7f96b..00000000000000 --- a/Documentation/scheduler/00-INDEX +++ /dev/null @@ -1,18 +0,0 @@ -00-INDEX - - this file. -sched-arch.txt - - CPU Scheduler implementation hints for architecture specific code. -sched-bwc.txt - - CFS bandwidth control overview. -sched-design-CFS.txt - - goals, design and implementation of the Completely Fair Scheduler. -sched-domains.txt - - information on scheduling domains. -sched-nice-design.txt - - How and why the scheduler's nice levels are implemented. -sched-rt-group.txt - - real-time group scheduling. -sched-deadline.txt - - deadline scheduling. -sched-stats.txt - - information on schedstats (Linux Scheduler Statistics). diff --git a/Documentation/scsi/00-INDEX b/Documentation/scsi/00-INDEX deleted file mode 100644 index bb4a76f823e10a..00000000000000 --- a/Documentation/scsi/00-INDEX +++ /dev/null @@ -1,108 +0,0 @@ -00-INDEX - - this file -53c700.txt - - info on driver for 53c700 based adapters -BusLogic.txt - - info on driver for adapters with BusLogic chips -ChangeLog.1992-1997 - - Changes to scsi files, if not listed elsewhere -ChangeLog.arcmsr - - Changes to driver for ARECA's SATA RAID controller cards -ChangeLog.ips - - IBM ServeRAID driver Changelog -ChangeLog.lpfc - - Changes to lpfc driver -ChangeLog.megaraid - - Changes to LSI megaraid controller. -ChangeLog.megaraid_sas - - Changes to serial attached scsi version of LSI megaraid controller. -ChangeLog.ncr53c8xx - - Changes to ncr53c8xx driver -ChangeLog.sym53c8xx - - Changes to sym53c8xx driver -ChangeLog.sym53c8xx_2 - - Changes to second generation of sym53c8xx driver -FlashPoint.txt - - info on driver for BusLogic FlashPoint adapters -LICENSE.FlashPoint - - Licence of the Flashpoint driver -LICENSE.qla2xxx - - License for QLogic Linux Fibre Channel HBA Driver firmware. -LICENSE.qla4xxx - - License for QLogic Linux iSCSI HBA Driver. -Mylex.txt - - info on driver for Mylex adapters -NinjaSCSI.txt - - info on WorkBiT NinjaSCSI-32/32Bi driver -aacraid.txt - - Driver supporting Adaptec RAID controllers -advansys.txt - - List of Advansys Host Adapters -aha152x.txt - - info on driver for Adaptec AHA152x based adapters -aic79xx.txt - - Adaptec Ultra320 SCSI host adapters -aic7xxx.txt - - info on driver for Adaptec controllers -arcmsr_spec.txt - - ARECA FIRMWARE SPEC (for IOP331 adapter) -bfa.txt - - Brocade FC/FCOE adapter driver. -bnx2fc.txt - - FCoE hardware offload for Broadcom network interfaces. -cxgb3i.txt - - Chelsio iSCSI Linux Driver -dc395x.txt - - README file for the dc395x SCSI driver -dpti.txt - - info on driver for DPT SmartRAID and Adaptec I2O RAID based adapters -dtc3x80.txt - - info on driver for DTC 2x80 based adapters -g_NCR5380.txt - - info on driver for NCR5380 and NCR53c400 based adapters -hpsa.txt - - HP Smart Array Controller SCSI driver. -hptiop.txt - - HIGHPOINT ROCKETRAID 3xxx RAID DRIVER -libsas.txt - - Serial Attached SCSI management layer. -link_power_management_policy.txt - - Link power management options. -lpfc.txt - - LPFC driver release notes -megaraid.txt - - Common Management Module, shared code handling ioctls for LSI drivers -ncr53c8xx.txt - - info on driver for NCR53c8xx based adapters -osd.txt - Object-Based Storage Device, command set introduction. -osst.txt - - info on driver for OnStream SC-x0 SCSI tape -ppa.txt - - info on driver for IOmega zip drive -qlogicfas.txt - - info on driver for QLogic FASxxx based adapters -scsi-changer.txt - - README for the SCSI media changer driver -scsi-generic.txt - - info on the sg driver for generic (non-disk/CD/tape) SCSI devices. -scsi-parameters.txt - - List of SCSI-parameters to pass to the kernel at module load-time. -scsi.txt - - short blurb on using SCSI support as a module. -scsi_mid_low_api.txt - - info on API between SCSI layer and low level drivers -scsi_eh.txt - - info on SCSI midlayer error handling infrastructure -scsi_fc_transport.txt - - SCSI Fiber Channel Tansport -st.txt - - info on scsi tape driver -sym53c500_cs.txt - - info on PCMCIA driver for Symbios Logic 53c500 based adapters -sym53c8xx_2.txt - - info on second generation driver for sym53c8xx based adapters -tmscsim.txt - - info on driver for AM53c974 based adapters -ufs.txt - - info on Universal Flash Storage(UFS) and UFS host controller driver. diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX deleted file mode 100644 index 8021a9f29fc59a..00000000000000 --- a/Documentation/serial/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - this file. -README.cycladesZ - - info on Cyclades-Z firmware loading. -driver - - intro to the low level serial driver. -moxa-smartio - - file with info on installing/using Moxa multiport serial driver. -n_gsm.txt - - GSM 0710 tty multiplexer howto. -rocket.txt - - info on the Comtrol RocketPort multiport serial driver. -serial-rs485.txt - - info about RS485 structures and support in the kernel. -tty.txt - - guide to the locking policies of the tty layer. diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX deleted file mode 100644 index 8e4bb17d70ebbf..00000000000000 --- a/Documentation/spi/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - this file. -butterfly - - AVR Butterfly SPI driver overview and pin configuration. -ep93xx_spi - - Basic EP93xx SPI driver configuration. -pxa2xx - - PXA2xx SPI master controller build by spi_message fifo wq -spidev - - Intro to the userspace API for spi devices -spi-lm70llp - - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. -spi-sc18is602 - - NXP SC18IS602/603 I2C-bus to SPI bridge -spi-summary - - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. diff --git a/Documentation/sysctl/00-INDEX b/Documentation/sysctl/00-INDEX deleted file mode 100644 index 8cf5d493fd03de..00000000000000 --- a/Documentation/sysctl/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - this file. -README - - general information about /proc/sys/ sysctl files. -abi.txt - - documentation for /proc/sys/abi/*. -fs.txt - - documentation for /proc/sys/fs/*. -kernel.txt - - documentation for /proc/sys/kernel/*. -net.txt - - documentation for /proc/sys/net/*. -sunrpc.txt - - documentation for /proc/sys/sunrpc/*. -vm.txt - - documentation for /proc/sys/vm/*. diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX deleted file mode 100644 index 3be05fe0f1f9e5..00000000000000 --- a/Documentation/timers/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - this file -highres.txt - - High resolution timers and dynamic ticks design notes -hpet.txt - - High Precision Event Timer Driver for Linux -hrtimers.txt - - subsystem for high-resolution kernel timers -NO_HZ.txt - - Summary of the different methods for the scheduler clock-interrupts management. -timekeeping.txt - - Clock sources, clock events, sched_clock() and delay timer notes -timers-howto.txt - - how to insert delays in the kernel the right (tm) way. -timer_stats.txt - - timer usage statistics diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX deleted file mode 100644 index af0d23968ee710..00000000000000 --- a/Documentation/virtual/00-INDEX +++ /dev/null @@ -1,11 +0,0 @@ -Virtualization support in the Linux kernel. - -00-INDEX - - this file. - -paravirt_ops.txt - - Describes the Linux kernel pv_ops to support different hypervisors -kvm/ - - Kernel Virtual Machine. See also http://linux-kvm.org -uml/ - - User Mode Linux, builds/runs Linux kernel as a userspace program. diff --git a/Documentation/virtual/kvm/00-INDEX b/Documentation/virtual/kvm/00-INDEX deleted file mode 100644 index 3492458a4ae8b8..00000000000000 --- a/Documentation/virtual/kvm/00-INDEX +++ /dev/null @@ -1,35 +0,0 @@ -00-INDEX - - this file. -amd-memory-encryption.rst - - notes on AMD Secure Encrypted Virtualization feature and SEV firmware - command description -api.txt - - KVM userspace API. -arm - - internal ABI between the kernel and HYP (for arm/arm64) -cpuid.txt - - KVM-specific cpuid leaves (x86). -devices/ - - KVM_CAP_DEVICE_CTRL userspace API. -halt-polling.txt - - notes on halt-polling -hypercalls.txt - - KVM hypercalls. -locking.txt - - notes on KVM locks. -mmu.txt - - the x86 kvm shadow mmu. -msr.txt - - KVM-specific MSRs (x86). -nested-vmx.txt - - notes on nested virtualization for Intel x86 processors. -ppc-pv.txt - - the paravirtualization interface on PowerPC. -review-checklist.txt - - review checklist for KVM patches. -s390-diag.txt - - Diagnose hypercall description (for IBM S/390) -timekeeping.txt - - timekeeping virtualization for x86-based architectures. -vcpu-requests.rst - - internal VCPU request API diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX deleted file mode 100644 index f4a4f3e884cf6d..00000000000000 --- a/Documentation/vm/00-INDEX +++ /dev/null @@ -1,50 +0,0 @@ -00-INDEX - - this file. -active_mm.rst - - An explanation from Linus about tsk->active_mm vs tsk->mm. -balance.rst - - various information on memory balancing. -cleancache.rst - - Intro to cleancache and page-granularity victim cache. -frontswap.rst - - Outline frontswap, part of the transcendent memory frontend. -highmem.rst - - Outline of highmem and common issues. -hmm.rst - - Documentation of heterogeneous memory management -hugetlbfs_reserv.rst - - A brief overview of hugetlbfs reservation design/implementation. -hwpoison.rst - - explains what hwpoison is -ksm.rst - - how to use the Kernel Samepage Merging feature. -mmu_notifier.rst - - a note about clearing pte/pmd and mmu notifications -numa.rst - - information about NUMA specific code in the Linux vm. -overcommit-accounting.rst - - description of the Linux kernels overcommit handling modes. -page_frags.rst - - description of page fragments allocator -page_migration.rst - - description of page migration in NUMA systems. -page_owner.rst - - tracking about who allocated each page -remap_file_pages.rst - - a note about remap_file_pages() system call -slub.rst - - a short users guide for SLUB. -split_page_table_lock.rst - - Separate per-table lock to improve scalability of the old page_table_lock. -swap_numa.rst - - automatic binding of swap device to numa node -transhuge.rst - - Transparent Hugepage Support, alternative way of using hugepages. -unevictable-lru.rst - - Unevictable LRU infrastructure -z3fold.txt - - outline of z3fold allocator for storing compressed pages -zsmalloc.rst - - outline of zsmalloc allocator for storing compressed pages -zswap.rst - - Intro to compressed cache for swap pages diff --git a/Documentation/w1/00-INDEX b/Documentation/w1/00-INDEX deleted file mode 100644 index cb49802745dcb1..00000000000000 --- a/Documentation/w1/00-INDEX +++ /dev/null @@ -1,10 +0,0 @@ -00-INDEX - - This file -slaves/ - - Drivers that provide support for specific family codes. -masters/ - - Individual chips providing 1-wire busses. -w1.generic - - The 1-wire (w1) bus -w1.netlink - - Userspace communication protocol over connector [1]. diff --git a/Documentation/w1/masters/00-INDEX b/Documentation/w1/masters/00-INDEX deleted file mode 100644 index 8330cf9325f0ad..00000000000000 --- a/Documentation/w1/masters/00-INDEX +++ /dev/null @@ -1,12 +0,0 @@ -00-INDEX - - This file -ds2482 - - The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses. -ds2490 - - The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges. -mxc-w1 - - W1 master controller driver found on Freescale MX2/MX3 SoCs -omap-hdq - - HDQ/1-wire module of TI OMAP 2430/3430. -w1-gpio - - GPIO 1-wire bus master driver. diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX deleted file mode 100644 index 68946f83e579f5..00000000000000 --- a/Documentation/w1/slaves/00-INDEX +++ /dev/null @@ -1,14 +0,0 @@ -00-INDEX - - This file -w1_therm - - The Maxim/Dallas Semiconductor ds18*20 temperature sensor. -w1_ds2413 - - The Maxim/Dallas Semiconductor ds2413 dual channel addressable switch. -w1_ds2423 - - The Maxim/Dallas Semiconductor ds2423 counter device. -w1_ds2438 - - The Maxim/Dallas Semiconductor ds2438 smart battery monitor. -w1_ds28e04 - - The Maxim/Dallas Semiconductor ds28e04 eeprom. -w1_ds28e17 - - The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge. diff --git a/Documentation/x86/00-INDEX b/Documentation/x86/00-INDEX deleted file mode 100644 index 3bb2ee3edcd1ad..00000000000000 --- a/Documentation/x86/00-INDEX +++ /dev/null @@ -1,20 +0,0 @@ -00-INDEX - - this file -boot.txt - - List of boot protocol versions -earlyprintk.txt - - Using earlyprintk with a USB2 debug port key. -entry_64.txt - - Describe (some of the) kernel entry points for x86. -exception-tables.txt - - why and how Linux kernel uses exception tables on x86 -microcode.txt - - How to load microcode from an initrd-CPIO archive early to fix CPU issues. -mtrr.txt - - how to use x86 Memory Type Range Registers to increase performance -pat.txt - - Page Attribute Table intro and API -usb-legacy-support.txt - - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard. -zero-page.txt - - layout of the first page of memory. diff --git a/Documentation/x86/x86_64/00-INDEX b/Documentation/x86/x86_64/00-INDEX deleted file mode 100644 index 92fc20ab5f0e36..00000000000000 --- a/Documentation/x86/x86_64/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - This file -boot-options.txt - - AMD64-specific boot options. -cpu-hotplug-spec - - Firmware support for CPU hotplug under Linux/x86-64 -fake-numa-for-cpusets - - Using numa=fake and CPUSets for Resource Management -kernel-stacks - - Context-specific per-processor interrupt stacks. -machinecheck - - Configurable sysfs parameters for the x86-64 machine check code. -mm.txt - - Memory layout of x86-64 (4 level page tables, 46 bits physical). -uefi.txt - - Booting Linux via Unified Extensible Firmware Interface. diff --git a/README b/README index 2c927ccbd97055..669ac7c3229279 100644 --- a/README +++ b/README @@ -12,7 +12,6 @@ In order to build the documentation, use ``make htmldocs`` or There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. -See Documentation/00-INDEX for a list of what is contained in each file. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about diff --git a/scripts/check_00index.sh b/scripts/check_00index.sh deleted file mode 100755 index aa47f5926c8094..00000000000000 --- a/scripts/check_00index.sh +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -cd Documentation/ - -# Check entries that should be removed - -obsolete="" -for i in $(tail -n +12 00-INDEX |grep -E '^[a-zA-Z0-9]+'); do - if [ ! -e $i ]; then - obsolete="$obsolete $i" - fi -done - -# Check directory entries that should be added -search="" -dir="" -for i in $(find . -maxdepth 1 -type d); do - if [ "$i" != "." ]; then - new=$(echo $i|perl -ne 's,./(.*),$1/,; print $_') - search="$search $new" - fi -done - -for i in $search; do - if [ "$(grep -P "^$i" 00-INDEX)" == "" ]; then - dir="$dir $i" - fi -done - -# Check file entries that should be added -search="" -file="" -for i in $(find . -maxdepth 1 -type f); do - if [ "$i" != "./.gitignore" ]; then - new=$(echo $i|perl -ne 's,./(.*),$1,; print $_') - search="$search $new" - fi -done - -for i in $search; do - if [ "$(grep -P "^$i\$" 00-INDEX)" == "" ]; then - file="$file $i" - fi -done - -# Output its findings - -echo -e "Documentation/00-INDEX check results:\n" - -if [ "$obsolete" != "" ]; then - echo -e "- Should remove those entries:\n\t$obsolete\n" -else - echo -e "- No obsolete entries\n" -fi - -if [ "$dir" != "" ]; then - echo -e "- Should document those directories:\n\t$dir\n" -else - echo -e "- No new directories to add\n" -fi - -if [ "$file" != "" ]; then - echo -e "- Should document those files:\n\t$file" -else - echo "- No new files to add" -fi From ad98b6023786647660f438ea6f8fe4e3ce923a2e Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 11 Sep 2018 19:24:11 +0300 Subject: [PATCH 18/41] docs/boot-time-mm: fix kernel-doc directive for including all but DOC: There were several rounds of the patches that enabled "functions" directive with no parameters in kerneldoc.py to allow including all the kernel-doc comments except the DOC: sections. Yet, the boot-time-mm.rst sneaked in with the older version of that directive and was not updated. Update it now. Signed-off-by: Mike Rapoport Tested-by: Randy Dunlap Signed-off-by: Jonathan Corbet --- Documentation/core-api/boot-time-mm.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/core-api/boot-time-mm.rst b/Documentation/core-api/boot-time-mm.rst index 03cb1643f46f53..6e12e89a03e076 100644 --- a/Documentation/core-api/boot-time-mm.rst +++ b/Documentation/core-api/boot-time-mm.rst @@ -76,7 +76,7 @@ These interfaces available only with bootmem, i.e when ``CONFIG_NO_BOOTMEM=n`` .. kernel-doc:: include/linux/bootmem.h .. kernel-doc:: mm/bootmem.c - :nodocs: + :functions: Memblock specific API --------------------- @@ -89,4 +89,4 @@ really happens under the hood. .. kernel-doc:: include/linux/memblock.h .. kernel-doc:: mm/memblock.c - :nodocs: + :functions: From 8ff7e072880ee48592ce0e4ce7488097205e544e Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 14 Sep 2018 12:27:56 +0300 Subject: [PATCH 19/41] docs: core-api/gfp_mask-from-fs-io: add a label for cross-referencing Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- Documentation/core-api/gfp_mask-from-fs-io.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/core-api/gfp_mask-from-fs-io.rst b/Documentation/core-api/gfp_mask-from-fs-io.rst index e0df8f4165826a..e7c32a8de126a5 100644 --- a/Documentation/core-api/gfp_mask-from-fs-io.rst +++ b/Documentation/core-api/gfp_mask-from-fs-io.rst @@ -1,3 +1,5 @@ +.. _gfp_mask_from_fs_io: + ================================= GFP masks used from FS/IO context ================================= From 09700f8a503ac8e76733387e2bab1a199b44236a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 14 Sep 2018 12:27:57 +0300 Subject: [PATCH 20/41] docs: core-api/mm-api: add a lable for GFP flags section Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- Documentation/core-api/mm-api.rst | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst index 46ae3537fb1278..5ce1ec1dd0663f 100644 --- a/Documentation/core-api/mm-api.rst +++ b/Documentation/core-api/mm-api.rst @@ -14,6 +14,8 @@ User Space Memory Access .. kernel-doc:: mm/util.c :functions: get_user_pages_fast +.. _mm-api-gfp-flags: + Memory Allocation Controls ========================== From 52272c923af09bdeaf94392d9856f07c30b032e5 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 14 Sep 2018 12:27:58 +0300 Subject: [PATCH 21/41] docs: core-api: add memory allocation guide Signed-off-by: Mike Rapoport Acked-by: Michal Hocko Acked-by: Randy Dunlap Signed-off-by: Jonathan Corbet --- Documentation/core-api/index.rst | 1 + Documentation/core-api/memory-allocation.rst | 122 +++++++++++++++++++ 2 files changed, 123 insertions(+) create mode 100644 Documentation/core-api/memory-allocation.rst diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 26b735cefb932f..165d76886d73dd 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -27,6 +27,7 @@ Core utilities errseq printk-formats circular-buffers + memory-allocation mm-api gfp_mask-from-fs-io timekeeping diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst new file mode 100644 index 00000000000000..f8bb9aa120c427 --- /dev/null +++ b/Documentation/core-api/memory-allocation.rst @@ -0,0 +1,122 @@ +======================= +Memory Allocation Guide +======================= + +Linux provides a variety of APIs for memory allocation. You can +allocate small chunks using `kmalloc` or `kmem_cache_alloc` families, +large virtually contiguous areas using `vmalloc` and its derivatives, +or you can directly request pages from the page allocator with +`alloc_pages`. It is also possible to use more specialized allocators, +for instance `cma_alloc` or `zs_malloc`. + +Most of the memory allocation APIs use GFP flags to express how that +memory should be allocated. The GFP acronym stands for "get free +pages", the underlying memory allocation function. + +Diversity of the allocation APIs combined with the numerous GFP flags +makes the question "How should I allocate memory?" not that easy to +answer, although very likely you should use + +:: + + kzalloc(, GFP_KERNEL); + +Of course there are cases when other allocation APIs and different GFP +flags must be used. + +Get Free Page flags +=================== + +The GFP flags control the allocators behavior. They tell what memory +zones can be used, how hard the allocator should try to find free +memory, whether the memory can be accessed by the userspace etc. The +:ref:`Documentation/core-api/mm-api.rst ` provides +reference documentation for the GFP flags and their combinations and +here we briefly outline their recommended usage: + + * Most of the time ``GFP_KERNEL`` is what you need. Memory for the + kernel data structures, DMAable memory, inode cache, all these and + many other allocations types can use ``GFP_KERNEL``. Note, that + using ``GFP_KERNEL`` implies ``GFP_RECLAIM``, which means that + direct reclaim may be triggered under memory pressure; the calling + context must be allowed to sleep. + * If the allocation is performed from an atomic context, e.g interrupt + handler, use ``GFP_NOWAIT``. This flag prevents direct reclaim and + IO or filesystem operations. Consequently, under memory pressure + ``GFP_NOWAIT`` allocation is likely to fail. Allocations which + have a reasonable fallback should be using ``GFP_NOWARN``. + * If you think that accessing memory reserves is justified and the kernel + will be stressed unless allocation succeeds, you may use ``GFP_ATOMIC``. + * Untrusted allocations triggered from userspace should be a subject + of kmem accounting and must have ``__GFP_ACCOUNT`` bit set. There + is the handy ``GFP_KERNEL_ACCOUNT`` shortcut for ``GFP_KERNEL`` + allocations that should be accounted. + * Userspace allocations should use either of the ``GFP_USER``, + ``GFP_HIGHUSER`` or ``GFP_HIGHUSER_MOVABLE`` flags. The longer + the flag name the less restrictive it is. + + ``GFP_HIGHUSER_MOVABLE`` does not require that allocated memory + will be directly accessible by the kernel and implies that the + data is movable. + + ``GFP_HIGHUSER`` means that the allocated memory is not movable, + but it is not required to be directly accessible by the kernel. An + example may be a hardware allocation that maps data directly into + userspace but has no addressing limitations. + + ``GFP_USER`` means that the allocated memory is not movable and it + must be directly accessible by the kernel. + +You may notice that quite a few allocations in the existing code +specify ``GFP_NOIO`` or ``GFP_NOFS``. Historically, they were used to +prevent recursion deadlocks caused by direct memory reclaim calling +back into the FS or IO paths and blocking on already held +resources. Since 4.12 the preferred way to address this issue is to +use new scope APIs described in +:ref:`Documentation/core-api/gfp_mask-from-fs-io.rst `. + +Other legacy GFP flags are ``GFP_DMA`` and ``GFP_DMA32``. They are +used to ensure that the allocated memory is accessible by hardware +with limited addressing capabilities. So unless you are writing a +driver for a device with such restrictions, avoid using these flags. +And even with hardware with restrictions it is preferable to use +`dma_alloc*` APIs. + +Selecting memory allocator +========================== + +The most straightforward way to allocate memory is to use a function +from the :c:func:`kmalloc` family. And, to be on the safe size it's +best to use routines that set memory to zero, like +:c:func:`kzalloc`. If you need to allocate memory for an array, there +are :c:func:`kmalloc_array` and :c:func:`kcalloc` helpers. + +The maximal size of a chunk that can be allocated with `kmalloc` is +limited. The actual limit depends on the hardware and the kernel +configuration, but it is a good practice to use `kmalloc` for objects +smaller than page size. + +For large allocations you can use :c:func:`vmalloc` and +:c:func:`vzalloc`, or directly request pages from the page +allocator. The memory allocated by `vmalloc` and related functions is +not physically contiguous. + +If you are not sure whether the allocation size is too large for +`kmalloc`, it is possible to use :c:func:`kvmalloc` and its +derivatives. It will try to allocate memory with `kmalloc` and if the +allocation fails it will be retried with `vmalloc`. There are +restrictions on which GFP flags can be used with `kvmalloc`; please +see :c:func:`kvmalloc_node` reference documentation. Note that +`kvmalloc` may return memory that is not physically contiguous. + +If you need to allocate many identical objects you can use the slab +cache allocator. The cache should be set up with +:c:func:`kmem_cache_create` before it can be used. Afterwards +:c:func:`kmem_cache_alloc` and its convenience wrappers can allocate +memory from that cache. + +When the allocated memory is no longer needed it must be freed. You +can use :c:func:`kvfree` for the memory allocated with `kmalloc`, +`vmalloc` and `kvmalloc`. The slab caches should be freed with +:c:func:`kmem_cache_free`. And don't forget to destroy the cache with +:c:func:`kmem_cache_destroy`. From 9d723b4ccbd2248a388f37200a931b68dab28ada Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 20 Sep 2018 14:14:26 +0100 Subject: [PATCH 22/41] iommu: Fix passthrough option documentation Document that the default for "iommu.passthrough" is now configurable. Fixes: 58d1131777a4 ("iommu: Add config option to set passthrough as default") Signed-off-by: Robin Murphy Signed-off-by: Jonathan Corbet --- Documentation/admin-guide/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 9871e649ffeffe..8c5a956f3d9c25 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1754,7 +1754,7 @@ Format: { "0" | "1" } 0 - Use IOMMU translation for DMA. 1 - Bypass the IOMMU for DMA. - unset - Use IOMMU translation for DMA. + unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH. io7= [HW] IO7 for Marvel based alpha systems See comment before marvel_specify_io7 in From c03e2fa753020c18f9c0b4017be3f12816039841 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 17 Sep 2018 15:02:34 -0400 Subject: [PATCH 23/41] docs: fix some broken documentation references Some documentation files received recent changes and are pointing to wrong places. Those references can easily fixed with the help of a script: $ ./scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Jan Kara Reviewed-by: Darrick J. Wong Signed-off-by: Jonathan Corbet --- Documentation/filesystems/dax.txt | 2 +- Documentation/filesystems/ext2.txt | 2 +- MAINTAINERS | 4 ++-- net/bridge/Kconfig | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt index 70cb68bed2e88e..bc393e0a22b82b 100644 --- a/Documentation/filesystems/dax.txt +++ b/Documentation/filesystems/dax.txt @@ -75,7 +75,7 @@ exposure of uninitialized data through mmap. These filesystems may be used for inspiration: - ext2: see Documentation/filesystems/ext2.txt -- ext4: see Documentation/filesystems/ext4.txt +- ext4: see Documentation/filesystems/ext4/ext4.rst - xfs: see Documentation/filesystems/xfs.txt diff --git a/Documentation/filesystems/ext2.txt b/Documentation/filesystems/ext2.txt index 81c0becab22505..a45c9fc0747b1c 100644 --- a/Documentation/filesystems/ext2.txt +++ b/Documentation/filesystems/ext2.txt @@ -358,7 +358,7 @@ and are copied into the filesystem. If a transaction is incomplete at the time of the crash, then there is no guarantee of consistency for the blocks in that transaction so they are discarded (which means any filesystem changes they represent are also lost). -Check Documentation/filesystems/ext4.txt if you want to read more about +Check Documentation/filesystems/ext4/ext4.rst if you want to read more about ext4 and journaling. References diff --git a/MAINTAINERS b/MAINTAINERS index a0bc1f2ea72122..8db248fd793c1e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -840,7 +840,7 @@ ANALOG DEVICES INC ADGS1408 DRIVER M: Mircea Caprioru S: Supported F: drivers/mux/adgs1408.c -F: Documentation/devicetree/bindings/mux/adgs1408.txt +F: Documentation/devicetree/bindings/mux/adi,adgs1408.txt ANALOG DEVICES INC ADP5061 DRIVER M: Stefan Popa @@ -5514,7 +5514,7 @@ W: http://ext4.wiki.kernel.org Q: http://patchwork.ozlabs.org/project/linux-ext4/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git S: Maintained -F: Documentation/filesystems/ext4.txt +F: Documentation/filesystems/ext4/ext4.rst F: fs/ext4/ Extended Verification Module (EVM) diff --git a/net/bridge/Kconfig b/net/bridge/Kconfig index aa0d3b2f1bb7f1..3625d6ade45c29 100644 --- a/net/bridge/Kconfig +++ b/net/bridge/Kconfig @@ -17,7 +17,7 @@ config BRIDGE other third party bridge products. In order to use the Ethernet bridge, you'll need the bridge - configuration tools; see + configuration tools; see for location. Please read the Bridge mini-HOWTO for more information. From ff348763775e9ed39ca8f354b67f9ba62ec27f2c Mon Sep 17 00:00:00 2001 From: Felix Eckhofer Date: Mon, 17 Sep 2018 11:34:48 +0200 Subject: [PATCH 24/41] doc: Fix acronym "FEKEK" in ecryptfs "FEFEK" was incorrectly used as acronym for "File Encryption Key Encryption Key". This replaces all occurences with "FEKEK". Signed-off-by: Felix Eckhofer Signed-off-by: Jonathan Corbet --- Documentation/security/keys/ecryptfs.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/security/keys/ecryptfs.rst b/Documentation/security/keys/ecryptfs.rst index 4920f3a8ea7571..0e2be0a6bb6abf 100644 --- a/Documentation/security/keys/ecryptfs.rst +++ b/Documentation/security/keys/ecryptfs.rst @@ -5,10 +5,10 @@ Encrypted keys for the eCryptfs filesystem ECryptfs is a stacked filesystem which transparently encrypts and decrypts each file using a randomly generated File Encryption Key (FEK). -Each FEK is in turn encrypted with a File Encryption Key Encryption Key (FEFEK) +Each FEK is in turn encrypted with a File Encryption Key Encryption Key (FEKEK) either in kernel space or in user space with a daemon called 'ecryptfsd'. In the former case the operation is performed directly by the kernel CryptoAPI -using a key, the FEFEK, derived from a user prompted passphrase; in the latter +using a key, the FEKEK, derived from a user prompted passphrase; in the latter the FEK is encrypted by 'ecryptfsd' with the help of external libraries in order to support other mechanisms like public key cryptography, PKCS#11 and TPM based operations. @@ -22,12 +22,12 @@ by the userspace utility 'mount.ecryptfs' shipped with the package The 'encrypted' key type has been extended with the introduction of the new format 'ecryptfs' in order to be used in conjunction with the eCryptfs filesystem. Encrypted keys of the newly introduced format store an -authentication token in its payload with a FEFEK randomly generated by the +authentication token in its payload with a FEKEK randomly generated by the kernel and protected by the parent master key. In order to avoid known-plaintext attacks, the datablob obtained through commands 'keyctl print' or 'keyctl pipe' does not contain the overall -authentication token, which content is well known, but only the FEFEK in +authentication token, which content is well known, but only the FEKEK in encrypted form. The eCryptfs filesystem may really benefit from using encrypted keys in that the From 6bf53999a3a269d5d27bb636602f6788e1bb4dd0 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 5 Oct 2018 01:11:00 +0300 Subject: [PATCH 25/41] docs: move memory hotplug description into admin-guide/mm The memory hotplug description in Documentation/memory-hotplug.txt is already formatted as ReST and can be easily added to admin-guide/mm section. While on it, slightly update formatting to make it consistent with the doc-guide. Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- Documentation/admin-guide/mm/index.rst | 1 + .../mm/memory-hotplug.rst} | 73 ++++++++++--------- 2 files changed, 38 insertions(+), 36 deletions(-) rename Documentation/{memory-hotplug.txt => admin-guide/mm/memory-hotplug.rst} (92%) diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index ceead68c2df744..8edb35f1131763 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -29,6 +29,7 @@ the Linux memory management. hugetlbpage idle_page_tracking ksm + memory-hotplug numa_memory_policy pagemap soft-dirty diff --git a/Documentation/memory-hotplug.txt b/Documentation/admin-guide/mm/memory-hotplug.rst similarity index 92% rename from Documentation/memory-hotplug.txt rename to Documentation/admin-guide/mm/memory-hotplug.rst index 7f49ebf3ddb23f..a33090c179d66e 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/admin-guide/mm/memory-hotplug.rst @@ -1,3 +1,5 @@ +.. _admin_guide_memory_hotplug: + ============== Memory Hotplug ============== @@ -9,10 +11,12 @@ This document is about memory hotplug including how-to-use and current status. Because Memory Hotplug is still under development, contents of this text will be changed often. +.. contents:: :local: + .. CONTENTS 1. Introduction - 1.1 purpose of memory hotplug + 1.1 Purpose of memory hotplug 1.2. Phases of memory hotplug 1.3. Unit of Memory online/offline operation 2. Kernel Configuration @@ -35,13 +39,13 @@ be changed often. (1) x86_64's has special implementation for memory hotplug. This text does not describe it. - (2) This text assumes that sysfs is mounted at /sys. + (2) This text assumes that sysfs is mounted at ``/sys``. Introduction ============ -purpose of memory hotplug +Purpose of memory hotplug ------------------------- Memory Hotplug allows users to increase/decrease the amount of memory. @@ -57,7 +61,6 @@ hardware which supports memory power management. Linux memory hotplug is designed for both purpose. - Phases of memory hotplug ------------------------ @@ -92,7 +95,6 @@ phase by hand. (However, if you writes udev's hotplug scripts for memory hotplug, these phases can be execute in seamless way.) - Unit of Memory online/offline operation --------------------------------------- @@ -107,10 +109,9 @@ unit upon which memory online/offline operations are to be performed. The default size of a memory block is the same as memory section size unless an architecture specifies otherwise. (see :ref:`memory_hotplug_sysfs_files`.) -To determine the size (in bytes) of a memory block please read this file: - -/sys/devices/system/memory/block_size_bytes +To determine the size (in bytes) of a memory block please read this file:: + /sys/devices/system/memory/block_size_bytes Kernel Configuration ==================== @@ -119,22 +120,22 @@ To use memory hotplug feature, kernel must be compiled with following config options. - For all memory hotplug: - - Memory model -> Sparse Memory (CONFIG_SPARSEMEM) - - Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG) + - Memory model -> Sparse Memory (``CONFIG_SPARSEMEM``) + - Allow for memory hot-add (``CONFIG_MEMORY_HOTPLUG``) - To enable memory removal, the following are also necessary: - - Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE) - - Page Migration (CONFIG_MIGRATION) + - Allow for memory hot remove (``CONFIG_MEMORY_HOTREMOVE``) + - Page Migration (``CONFIG_MIGRATION``) - For ACPI memory hotplug, the following are also necessary: - - Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY) + - Memory hotplug (under ACPI Support menu) (``CONFIG_ACPI_HOTPLUG_MEMORY``) - This option can be kernel module. - As a related configuration, if your box has a feature of NUMA-node hotplug via ACPI, then this option is necessary too. - ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu) - (CONFIG_ACPI_CONTAINER). + (``CONFIG_ACPI_CONTAINER``). This option can be kernel module too. @@ -145,10 +146,11 @@ sysfs files for memory hotplug ============================== All memory blocks have their device information in sysfs. Each memory block -is described under /sys/devices/system/memory as: +is described under ``/sys/devices/system/memory`` as:: /sys/devices/system/memory/memoryXXX - (XXX is the memory block id.) + +where XXX is the memory block id. For the memory block covered by the sysfs directory. It is expected that all memory sections in this range are present and no memory holes exist in the @@ -157,7 +159,7 @@ the existence of one should not affect the hotplug capabilities of the memory block. For example, assume 1GiB memory block size. A device for a memory starting at -0x100000000 is /sys/device/system/memory/memory4:: +0x100000000 is ``/sys/device/system/memory/memory4``:: (0x100000000 / 1Gib = 4) @@ -165,11 +167,11 @@ This device covers address range [0x100000000 ... 0x140000000) Under each memory block, you can see 5 files: -- /sys/devices/system/memory/memoryXXX/phys_index -- /sys/devices/system/memory/memoryXXX/phys_device -- /sys/devices/system/memory/memoryXXX/state -- /sys/devices/system/memory/memoryXXX/removable -- /sys/devices/system/memory/memoryXXX/valid_zones +- ``/sys/devices/system/memory/memoryXXX/phys_index`` +- ``/sys/devices/system/memory/memoryXXX/phys_device`` +- ``/sys/devices/system/memory/memoryXXX/state`` +- ``/sys/devices/system/memory/memoryXXX/removable`` +- ``/sys/devices/system/memory/memoryXXX/valid_zones`` =================== ============================================================ ``phys_index`` read-only and contains memory block id, same as XXX. @@ -207,13 +209,15 @@ Under each memory block, you can see 5 files: These directories/files appear after physical memory hotplug phase. If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed -via symbolic links located in the /sys/devices/system/node/node* directories. +via symbolic links located in the ``/sys/devices/system/node/node*`` directories. + +For example:: -For example: -/sys/devices/system/node/node0/memory9 -> ../../memory/memory9 + /sys/devices/system/node/node0/memory9 -> ../../memory/memory9 -A backlink will also be created: -/sys/devices/system/memory/memory9/node0 -> ../../node/node0 +A backlink will also be created:: + + /sys/devices/system/memory/memory9/node0 -> ../../node/node0 .. _memory_hotplug_physical_mem: @@ -240,7 +244,6 @@ If firmware supports NUMA-node hotplug, and defines an object _HID "ACPI0004", calls hotplug code for all of objects which are defined in it. If memory device is found, memory hotplug code will be called. - Notify memory hot-add event by hand ----------------------------------- @@ -251,8 +254,9 @@ CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86 if hotplug is supported, although for x86 this should be handled by ACPI notification. -Probe interface is located at -/sys/devices/system/memory/probe +Probe interface is located at:: + + /sys/devices/system/memory/probe You can tell the physical address of new memory to the kernel by:: @@ -263,7 +267,6 @@ memory_block_size] memory range is hot-added. In this case, hotplug script is not called (in current implementation). You'll have to online memory by yourself. Please see :ref:`memory_hotplug_how_to_online_memory`. - Logical Memory hot-add phase ============================ @@ -301,7 +304,7 @@ This sets a global policy and impacts all memory blocks that will subsequently be hotplugged. Currently offline blocks keep their state. It is possible, under certain circumstances, that some memory blocks will be added but will fail to online. User space tools can check their "state" files -(/sys/devices/system/memory/memoryXXX/state) and try to online them manually. +(``/sys/devices/system/memory/memoryXXX/state``) and try to online them manually. If the automatic onlining wasn't requested, failed, or some memory block was offlined it is possible to change the individual block's state by writing to the @@ -334,8 +337,6 @@ available memory will be increased. This may be changed in future. - - Logical memory remove ===================== @@ -418,7 +419,7 @@ Memory hotplug event notifier Hotplugging events are sent to a notification queue. -There are six types of notification defined in include/linux/memory.h: +There are six types of notification defined in ``include/linux/memory.h``: MEM_GOING_ONLINE Generated before new memory becomes available in order to be able to @@ -485,7 +486,7 @@ The third argument (arg) passes a pointer of struct memory_notify:: The callback routine shall return one of the values NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP -defined in include/linux/notifier.h +defined in ``include/linux/notifier.h`` NOTIFY_DONE and NOTIFY_OK have no effect on the further processing. From 98cee6742c80e35274bab06c5fa1141fe0abd910 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Fri, 5 Oct 2018 01:11:01 +0300 Subject: [PATCH 26/41] docs/vm: split memory hotplug notifier description to Documentation/core-api The memory hotplug notifier description is about kernel internals rather than admin/user visible API. Place it appropriately. Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- .../admin-guide/mm/memory-hotplug.rst | 83 ------------------ Documentation/core-api/index.rst | 2 + .../core-api/memory-hotplug-notifier.rst | 84 +++++++++++++++++++ 3 files changed, 86 insertions(+), 83 deletions(-) create mode 100644 Documentation/core-api/memory-hotplug-notifier.rst diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst index a33090c179d66e..0b9c83effaa479 100644 --- a/Documentation/admin-guide/mm/memory-hotplug.rst +++ b/Documentation/admin-guide/mm/memory-hotplug.rst @@ -31,7 +31,6 @@ be changed often. 6.1 Memory offline and ZONE_MOVABLE 6.2. How to offline memory 7. Physical memory remove - 8. Memory hotplug event notifier 9. Future Work List @@ -414,88 +413,6 @@ Need more implementation yet.... - Notification completion of remove works by OS to firmware. - Guard from remove if not yet. -Memory hotplug event notifier -============================= - -Hotplugging events are sent to a notification queue. - -There are six types of notification defined in ``include/linux/memory.h``: - -MEM_GOING_ONLINE - Generated before new memory becomes available in order to be able to - prepare subsystems to handle memory. The page allocator is still unable - to allocate from the new memory. - -MEM_CANCEL_ONLINE - Generated if MEMORY_GOING_ONLINE fails. - -MEM_ONLINE - Generated when memory has successfully brought online. The callback may - allocate pages from the new memory. - -MEM_GOING_OFFLINE - Generated to begin the process of offlining memory. Allocations are no - longer possible from the memory but some of the memory to be offlined - is still in use. The callback can be used to free memory known to a - subsystem from the indicated memory block. - -MEM_CANCEL_OFFLINE - Generated if MEMORY_GOING_OFFLINE fails. Memory is available again from - the memory block that we attempted to offline. - -MEM_OFFLINE - Generated after offlining memory is complete. - -A callback routine can be registered by calling:: - - hotplug_memory_notifier(callback_func, priority) - -Callback functions with higher values of priority are called before callback -functions with lower values. - -A callback function must have the following prototype:: - - int callback_func( - struct notifier_block *self, unsigned long action, void *arg); - -The first argument of the callback function (self) is a pointer to the block -of the notifier chain that points to the callback function itself. -The second argument (action) is one of the event types described above. -The third argument (arg) passes a pointer of struct memory_notify:: - - struct memory_notify { - unsigned long start_pfn; - unsigned long nr_pages; - int status_change_nid_normal; - int status_change_nid_high; - int status_change_nid; - } - -- start_pfn is start_pfn of online/offline memory. -- nr_pages is # of pages of online/offline memory. -- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask - is (will be) set/clear, if this is -1, then nodemask status is not changed. -- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask - is (will be) set/clear, if this is -1, then nodemask status is not changed. -- status_change_nid is set node id when N_MEMORY of nodemask is (will be) - set/clear. It means a new(memoryless) node gets new memory by online and a - node loses all memory. If this is -1, then nodemask status is not changed. - - If status_changed_nid* >= 0, callback should create/discard structures for the - node if necessary. - -The callback routine shall return one of the values -NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP -defined in ``include/linux/notifier.h`` - -NOTIFY_DONE and NOTIFY_OK have no effect on the further processing. - -NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE, -MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops -further processing of the notification queue. - -NOTIFY_STOP stops further processing of the notification queue. - Future Work =========== diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 165d76886d73dd..4f8a4266eb7ce0 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -32,6 +32,8 @@ Core utilities gfp_mask-from-fs-io timekeeping boot-time-mm + memory-hotplug-notifier + Interfaces for kernel debugging =============================== diff --git a/Documentation/core-api/memory-hotplug-notifier.rst b/Documentation/core-api/memory-hotplug-notifier.rst new file mode 100644 index 00000000000000..35347cc3a43aa2 --- /dev/null +++ b/Documentation/core-api/memory-hotplug-notifier.rst @@ -0,0 +1,84 @@ +.. _memory_hotplug_notifier: + +============================= +Memory hotplug event notifier +============================= + +Hotplugging events are sent to a notification queue. + +There are six types of notification defined in ``include/linux/memory.h``: + +MEM_GOING_ONLINE + Generated before new memory becomes available in order to be able to + prepare subsystems to handle memory. The page allocator is still unable + to allocate from the new memory. + +MEM_CANCEL_ONLINE + Generated if MEM_GOING_ONLINE fails. + +MEM_ONLINE + Generated when memory has successfully brought online. The callback may + allocate pages from the new memory. + +MEM_GOING_OFFLINE + Generated to begin the process of offlining memory. Allocations are no + longer possible from the memory but some of the memory to be offlined + is still in use. The callback can be used to free memory known to a + subsystem from the indicated memory block. + +MEM_CANCEL_OFFLINE + Generated if MEM_GOING_OFFLINE fails. Memory is available again from + the memory block that we attempted to offline. + +MEM_OFFLINE + Generated after offlining memory is complete. + +A callback routine can be registered by calling:: + + hotplug_memory_notifier(callback_func, priority) + +Callback functions with higher values of priority are called before callback +functions with lower values. + +A callback function must have the following prototype:: + + int callback_func( + struct notifier_block *self, unsigned long action, void *arg); + +The first argument of the callback function (self) is a pointer to the block +of the notifier chain that points to the callback function itself. +The second argument (action) is one of the event types described above. +The third argument (arg) passes a pointer of struct memory_notify:: + + struct memory_notify { + unsigned long start_pfn; + unsigned long nr_pages; + int status_change_nid_normal; + int status_change_nid_high; + int status_change_nid; + } + +- start_pfn is start_pfn of online/offline memory. +- nr_pages is # of pages of online/offline memory. +- status_change_nid_normal is set node id when N_NORMAL_MEMORY of nodemask + is (will be) set/clear, if this is -1, then nodemask status is not changed. +- status_change_nid_high is set node id when N_HIGH_MEMORY of nodemask + is (will be) set/clear, if this is -1, then nodemask status is not changed. +- status_change_nid is set node id when N_MEMORY of nodemask is (will be) + set/clear. It means a new(memoryless) node gets new memory by online and a + node loses all memory. If this is -1, then nodemask status is not changed. + + If status_changed_nid* >= 0, callback should create/discard structures for the + node if necessary. + +The callback routine shall return one of the values +NOTIFY_DONE, NOTIFY_OK, NOTIFY_BAD, NOTIFY_STOP +defined in ``include/linux/notifier.h`` + +NOTIFY_DONE and NOTIFY_OK have no effect on the further processing. + +NOTIFY_BAD is used as response to the MEM_GOING_ONLINE, MEM_GOING_OFFLINE, +MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops +further processing of the notification queue. + +NOTIFY_STOP stops further processing of the notification queue. From 31527da5d673ed16255869b6d0f209285b8b0981 Mon Sep 17 00:00:00 2001 From: Yves-Alexis Perez Date: Tue, 2 Oct 2018 22:47:23 +0200 Subject: [PATCH 27/41] yama: clarify ptrace_scope=2 in Yama documentation Current phrasing is ambiguous since it's unclear if attaching to a children through PTRACE_TRACEME requires CAP_SYS_PTRACE. Rephrase the sentence to make that clear. Signed-off-by: Yves-Alexis Perez Acked-by: Kees Cook Signed-off-by: Jonathan Corbet --- Documentation/admin-guide/LSM/Yama.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/admin-guide/LSM/Yama.rst b/Documentation/admin-guide/LSM/Yama.rst index 13468ea696b716..d0a060de397399 100644 --- a/Documentation/admin-guide/LSM/Yama.rst +++ b/Documentation/admin-guide/LSM/Yama.rst @@ -64,8 +64,8 @@ The sysctl settings (writable only with ``CAP_SYS_PTRACE``) are: Using ``PTRACE_TRACEME`` is unchanged. 2 - admin-only attach: - only processes with ``CAP_SYS_PTRACE`` may use ptrace - with ``PTRACE_ATTACH``, or through children calling ``PTRACE_TRACEME``. + only processes with ``CAP_SYS_PTRACE`` may use ptrace, either with + ``PTRACE_ATTACH`` or through children calling ``PTRACE_TRACEME``. 3 - no attach: no processes may use ptrace with ``PTRACE_ATTACH`` nor via From 44ba0bb4f2ad96246cb1f20c041f4d062cf6c4c2 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Thu, 4 Oct 2018 18:06:03 -0700 Subject: [PATCH 28/41] docs: improve readability for people with poorer eyesight My eyesight is not in good shape, which means that I have difficulty reading the online Linux documentation. Specifically, body text is oddly small compared to list items and the contrast of various text elements is too low for me to be able to see easily. Therefore, alter the HTML theme overrides to make the text larger and increase the contrast for better visibility, and trust the typeface choices of the reader's browser. For the PDF output, increase the text size, use a sans-serif typeface for sans-serif text, and use a serif typeface for "roman" serif text. Signed-off-by: Darrick J. Wong Acked-by: Dave Chinner Signed-off-by: Jonathan Corbet --- Documentation/conf.py | 6 +-- .../sphinx-static/theme_overrides.css | 38 +++++++++++++++++++ 2 files changed, 41 insertions(+), 3 deletions(-) diff --git a/Documentation/conf.py b/Documentation/conf.py index b691af4831fadc..89946361e5455d 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -259,7 +259,7 @@ 'papersize': 'a4paper', # The font size ('10pt', '11pt' or '12pt'). -'pointsize': '8pt', +'pointsize': '11pt', # Latex figure (float) alignment #'figure_align': 'htbp', @@ -272,8 +272,8 @@ 'preamble': ''' % Use some font with UTF-8 support with XeLaTeX \\usepackage{fontspec} - \\setsansfont{DejaVu Serif} - \\setromanfont{DejaVu Sans} + \\setsansfont{DejaVu Sans} + \\setromanfont{DejaVu Serif} \\setmonofont{DejaVu Sans Mono} ''' diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css index 522b6d4c49d4cf..e21e36cd676179 100644 --- a/Documentation/sphinx-static/theme_overrides.css +++ b/Documentation/sphinx-static/theme_overrides.css @@ -4,6 +4,44 @@ * */ +/* Improve contrast and increase size for easier reading. */ + +body { + font-family: serif; + color: black; + font-size: 100%; +} + +h1, h2, .rst-content .toctree-wrapper p.caption, h3, h4, h5, h6, legend { + font-family: sans-serif; +} + +.wy-menu-vertical li.current a { + color: #505050; +} + +.wy-menu-vertical li.on a, .wy-menu-vertical li.current > a { + color: #303030; +} + +div[class^="highlight"] pre { + font-family: monospace; + color: black; + font-size: 100%; +} + +.wy-menu-vertical { + font-family: sans-serif; +} + +.c { + font-style: normal; +} + +p { + font-size: 100%; +} + /* Interim: Code-blocks with line nos - lines and line numbers don't line up. * see: https://github.com/rtfd/sphinx_rtd_theme/issues/419 */ From 52d7e21fd5677829353f7490723adf5f61999d84 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 11 Oct 2018 07:58:16 +0300 Subject: [PATCH 29/41] docs/core-api: rename memory-hotplug-notifier to memory-hotplug to allow additions of new documentation about memory hotplug under the same roof. Signed-off-by: Mike Rapoport Reviewed-by: David Hildenbrand Signed-off-by: Jonathan Corbet --- Documentation/core-api/index.rst | 2 +- .../{memory-hotplug-notifier.rst => memory-hotplug.rst} | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) rename Documentation/core-api/{memory-hotplug-notifier.rst => memory-hotplug.rst} (97%) diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 4f8a4266eb7ce0..29c790f571a5e5 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -32,7 +32,7 @@ Core utilities gfp_mask-from-fs-io timekeeping boot-time-mm - memory-hotplug-notifier + memory-hotplug Interfaces for kernel debugging diff --git a/Documentation/core-api/memory-hotplug-notifier.rst b/Documentation/core-api/memory-hotplug.rst similarity index 97% rename from Documentation/core-api/memory-hotplug-notifier.rst rename to Documentation/core-api/memory-hotplug.rst index 35347cc3a43aa2..a99f2f26472504 100644 --- a/Documentation/core-api/memory-hotplug-notifier.rst +++ b/Documentation/core-api/memory-hotplug.rst @@ -1,6 +1,9 @@ -.. _memory_hotplug_notifier: +.. _memory_hotplug: + +============== +Memory hotplug +============== -============================= Memory hotplug event notifier ============================= From 3a7452c5a72bd8098f6d4b37341e25a8725d790b Mon Sep 17 00:00:00 2001 From: David Hildenbrand Date: Thu, 11 Oct 2018 07:58:17 +0300 Subject: [PATCH 30/41] docs/core-api: memory-hotplug: add some details about locking internals Let's document the magic a bit, especially why device_hotplug_lock is required when adding/removing memory and how it all play together with requests to online/offline memory from user space. [ rppt: moved the text to Documentation/core-api/memory-hotplug.rst ] Link: http://lkml.kernel.org/r/20180925091457.28651-7-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Pavel Tatashin Reviewed-by: Rashmica Gupta Cc: Jonathan Corbet Cc: Michal Hocko Cc: Balbir Singh Cc: Benjamin Herrenschmidt Cc: Boris Ostrovsky Cc: Dan Williams Cc: Greg Kroah-Hartman Cc: Haiyang Zhang Cc: Heiko Carstens Cc: John Allen Cc: Joonsoo Kim Cc: Juergen Gross Cc: Kate Stewart Cc: "K. Y. Srinivasan" Cc: Len Brown Cc: Martin Schwidefsky Cc: Mathieu Malaterre Cc: Michael Ellerman Cc: Michael Neuling Cc: Nathan Fontenot Cc: Oscar Salvador Cc: Paul Mackerras Cc: Philippe Ombredanne Cc: Rafael J. Wysocki Cc: "Rafael J. Wysocki" Cc: Stephen Hemminger Cc: Thomas Gleixner Cc: Vlastimil Babka Cc: YASUAKI ISHIMATSU Signed-off-by: Andrew Morton Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- Documentation/core-api/memory-hotplug.rst | 38 +++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/Documentation/core-api/memory-hotplug.rst b/Documentation/core-api/memory-hotplug.rst index a99f2f26472504..de7467e480672a 100644 --- a/Documentation/core-api/memory-hotplug.rst +++ b/Documentation/core-api/memory-hotplug.rst @@ -85,3 +85,41 @@ MEM_ONLINE, or MEM_OFFLINE action to cancel hotplugging. It stops further processing of the notification queue. NOTIFY_STOP stops further processing of the notification queue. + +Locking Internals +================= + +When adding/removing memory that uses memory block devices (i.e. ordinary RAM), +the device_hotplug_lock should be held to: + +- synchronize against online/offline requests (e.g. via sysfs). This way, memory + block devices can only be accessed (.online/.state attributes) by user + space once memory has been fully added. And when removing memory, we + know nobody is in critical sections. +- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC) + +Especially, there is a possible lock inversion that is avoided using +device_hotplug_lock when adding memory and user space tries to online that +memory faster than expected: + +- device_online() will first take the device_lock(), followed by + mem_hotplug_lock +- add_memory_resource() will first take the mem_hotplug_lock, followed by + the device_lock() (while creating the devices, during bus_add_device()). + +As the device is visible to user space before taking the device_lock(), this +can result in a lock inversion. + +onlining/offlining of memory should be done via device_online()/ +device_offline() - to make sure it is properly synchronized to actions +via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type) + +When adding/removing/onlining/offlining memory or adding/removing +heterogeneous/device memory, we should always hold the mem_hotplug_lock in +write mode to serialise memory hotplug (e.g. access to global/zone +variables). + +In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read +mode allows for a quite efficient get_online_mems/put_online_mems +implementation, so code accessing memory can protect from that memory +vanishing. From 8639a0c790add196bdd457c98437fec299cde60e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Oct 2018 22:15:08 +0200 Subject: [PATCH 31/41] LICENSES: Add note to CDDL-1.0 license that it should not be used The only reason we have the CDDL-1.0 license text around is for some dual-licensed files from virtualbox. New code should not use this license. Add a note about this and change the example tag to be dual-licensed. Signed-off-by: Hans de Goede Signed-off-by: Jonathan Corbet --- LICENSES/other/CDDL-1.0 | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/LICENSES/other/CDDL-1.0 b/LICENSES/other/CDDL-1.0 index 195a1687930a7f..25f614276ddde1 100644 --- a/LICENSES/other/CDDL-1.0 +++ b/LICENSES/other/CDDL-1.0 @@ -1,10 +1,14 @@ Valid-License-Identifier: CDDL-1.0 SPDX-URL: https://spdx.org/licenses/CDDL-1.0.html Usage-Guide: + Do NOT use. The CDDL-1.0 is not GPL compatible. It may only be used for + dual-licensed files where the other license is GPL compatible. + If you end up using this it MUST be used together with a GPL2 compatible + license using "OR". To use the Common Development and Distribution License 1.0 put the following SPDX tag/value pair into a comment according to the placement guidelines in the licensing rules documentation: - SPDX-License-Identifier: CDDL-1.0 + SPDX-License-Identifier: ($GPL-COMPATIBLE-ID OR CDDL-1.0) License-Text: From 9dc84ee6e5361e65de37b459c80ee4800d2cf87d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 10 Oct 2018 22:15:09 +0200 Subject: [PATCH 32/41] LICENSES: Add ISC license text Add the full text of the ISC license to the kernel tree. It was copied directly from: https://spdx.org/licenses/ISC.html With the mention of "ISC" in the warranty disclaimer replaced with "THE AUTHOR" as done in the ISC license headers used in the ath10k and brcmfmac wifi drivers. Cc: Kalle Valo Signed-off-by: Hans de Goede Signed-off-by: Jonathan Corbet --- LICENSES/other/ISC | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 LICENSES/other/ISC diff --git a/LICENSES/other/ISC b/LICENSES/other/ISC new file mode 100644 index 00000000000000..8953c3142079ca --- /dev/null +++ b/LICENSES/other/ISC @@ -0,0 +1,24 @@ +Valid-License-Identifier: ISC +SPDX-URL: https://spdx.org/licenses/ISC.html +Usage-Guide: + To use the ISC License put the following SPDX tag/value pair into a + comment according to the placement guidelines in the licensing rules + documentation: + SPDX-License-Identifier: ISC +License-Text: + +ISC License + +Copyright (c) + +Permission to use, copy, modify, and/or distribute this software for any +purpose with or without fee is hereby granted, provided that the above +copyright notice and this permission notice appear in all copies. + +THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. From bc0e5262d3a06cd48a5aed90a817623ec16dc5c4 Mon Sep 17 00:00:00 2001 From: John Garry Date: Wed, 10 Oct 2018 22:56:32 +0800 Subject: [PATCH 33/41] docs/completion.txt: Fix a couple of punctuation nits This patch fixes a couple of punctuation nits which can make the document more correct and readable. Also missing "()" are added to some function references for consistency. Signed-off-by: John Garry Acked-by: Randy Dunlap Signed-off-by: Jonathan Corbet --- Documentation/scheduler/completion.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/scheduler/completion.txt b/Documentation/scheduler/completion.txt index 656cf803c00620..108bd0f264b3ba 100644 --- a/Documentation/scheduler/completion.txt +++ b/Documentation/scheduler/completion.txt @@ -116,7 +116,7 @@ A typical usage scenario is: This is not implying any temporal order on wait_for_completion() and the call to complete() - if the call to complete() happened before the call to wait_for_completion() then the waiting side simply will continue -immediately as all dependencies are satisfied if not it will block until +immediately as all dependencies are satisfied; if not, it will block until completion is signaled by complete(). Note that wait_for_completion() is calling spin_lock_irq()/spin_unlock_irq(), @@ -131,7 +131,7 @@ wait_for_completion(): The default behavior is to wait without a timeout and to mark the task as uninterruptible. wait_for_completion() and its variants are only safe in process context (as they can sleep) but not in atomic context, -interrupt context, with disabled irqs. or preemption is disabled - see also +interrupt context, with disabled irqs, or preemption is disabled - see also try_wait_for_completion() below for handling completion in atomic/interrupt context. @@ -224,7 +224,7 @@ queue spinlock. Any such concurrent calls to complete() or complete_all() probably are a design bug. Signaling completion from hard-irq context is fine as it will appropriately -lock with spin_lock_irqsave/spin_unlock_irqrestore and it will never sleep. +lock with spin_lock_irqsave()/spin_unlock_irqrestore() and it will never sleep. try_wait_for_completion()/completion_done(): From 0c6c987f3706fedff42eee5384c7ede8a910c4ed Mon Sep 17 00:00:00 2001 From: Nikolay Borisov Date: Tue, 9 Oct 2018 11:31:31 +0300 Subject: [PATCH 34/41] dm flakey: Document "error_writes" feature Commit ef548c551e72 ("dm flakey: introduce "error_writes" feature") added the ability to dm flakey to error out writes in contrast to silently dropping it with 'drop_writes'. Unfortunately this feature is not currently documented and one has to be either familiar with the source code of dm flakey or check out xfstests sources to know of this parameter. So document it. Signed-off-by: Nikolay Borisov Signed-off-by: Jonathan Corbet --- Documentation/device-mapper/dm-flakey.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/device-mapper/dm-flakey.txt b/Documentation/device-mapper/dm-flakey.txt index c43030718cef4a..9f0e247d087739 100644 --- a/Documentation/device-mapper/dm-flakey.txt +++ b/Documentation/device-mapper/dm-flakey.txt @@ -33,6 +33,10 @@ Optional feature parameters: All write I/O is silently ignored. Read I/O is handled correctly. + error_writes: + All write I/O is failed with an error signalled. + Read I/O is handled correctly. + corrupt_bio_byte : During , replace of the data of each matching bio with . From 44280690ced5dacd3004d4966ef9b15f940f34e0 Mon Sep 17 00:00:00 2001 From: Andrew Murray Date: Mon, 8 Oct 2018 14:15:15 +0100 Subject: [PATCH 35/41] Documentation: preempt-locking: Use better example The existing wording implies that the use of spin_unlock whilst irqs are disabled might trigger a reschedule. However the preemptible() test in preempt_schedule will prevent a reschedule if irqs are disabled. Lets improve the clarity of this wording to change the example from spin_unlock to cond_resched() and cond_resched_lock() as these are functions that will trigger a reschedule if the preempt count is 0 without testing that irqs are disabled. Also remove the 'Last Updated' line as this is not up to date and better tracked via GIT. Signed-off-by: Andrew Murray Signed-off-by: Jonathan Corbet --- Documentation/preempt-locking.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/preempt-locking.txt b/Documentation/preempt-locking.txt index c945062be66c21..509f5a422d5711 100644 --- a/Documentation/preempt-locking.txt +++ b/Documentation/preempt-locking.txt @@ -3,7 +3,6 @@ Proper Locking Under a Preemptible Kernel: Keeping Kernel Code Preempt-Safe =========================================================================== :Author: Robert Love -:Last Updated: 28 Aug 2002 Introduction @@ -92,11 +91,12 @@ any locks or interrupts are disabled, since preemption is implicitly disabled in those cases. But keep in mind that 'irqs disabled' is a fundamentally unsafe way of -disabling preemption - any spin_unlock() decreasing the preemption count -to 0 might trigger a reschedule. A simple printk() might trigger a reschedule. -So use this implicit preemption-disabling property only if you know that the -affected codepath does not do any of this. Best policy is to use this only for -small, atomic code that you wrote and which calls no complex functions. +disabling preemption - any cond_resched() or cond_resched_lock() might trigger +a reschedule if the preempt count is 0. A simple printk() might trigger a +reschedule. So use this implicit preemption-disabling property only if you +know that the affected codepath does not do any of this. Best policy is to use +this only for small, atomic code that you wrote and which calls no complex +functions. Example:: From 94ac8f2074b22465f75e93ecbb98060d7960f4b6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 8 Oct 2018 13:08:48 +0200 Subject: [PATCH 36/41] doc: printk-formats: Remove bogus kobject references for device nodes When converting from text to rst, the kobjects section and its sole subsection about device tree nodes were coalesced into a single section, yielding an inconsistent result. Remove all references to kobjects, as 1. Device tree object pointers are not compatible to kobject pointers (the former may embed the latter, though), and 2. there are no printk formats defined for kobject types. Update the vsprintf() source code comments to match the above. Fixes: b3ed23213eab1e08 ("doc: convert printk-formats.txt to rst") Signed-off-by: Geert Uytterhoeven Signed-off-by: Jonathan Corbet --- Documentation/core-api/printk-formats.rst | 6 +++--- lib/vsprintf.c | 20 +++++++++----------- 2 files changed, 12 insertions(+), 14 deletions(-) diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 25dc591cb11087..86023c33906f09 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -376,15 +376,15 @@ correctness of the format string and va_list arguments. Passed by reference. -kobjects --------- +Device tree nodes +----------------- :: %pOF[fnpPcCF] -For printing kobject based structs (device nodes). Default behaviour is +For printing device tree node structures. Default behaviour is equivalent to %pOFf. - f - device node full_name diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d5b3a3f95c01c8..c8005105e2d6cc 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -1833,17 +1833,15 @@ static char *ptr_to_id(char *buf, char *end, void *ptr, struct printf_spec spec) * p page flags (see struct page) given as pointer to unsigned long * g gfp flags (GFP_* and __GFP_*) given as pointer to gfp_t * v vma flags (VM_*) given as pointer to unsigned long - * - 'O' For a kobject based struct. Must be one of the following: - * - 'OF[fnpPcCF]' For a device tree object - * Without any optional arguments prints the full_name - * f device node full_name - * n device node name - * p device node phandle - * P device node path spec (name + @unit) - * F device node flags - * c major compatible string - * C full compatible string - * + * - 'OF[fnpPcCF]' For a device tree object + * Without any optional arguments prints the full_name + * f device node full_name + * n device node name + * p device node phandle + * P device node path spec (name + @unit) + * F device node flags + * c major compatible string + * C full compatible string * - 'x' For printing the address. Equivalent to "%lx". * * ** When making changes please also update: From 63625899c6eba697fdbefcdcdc2cb27549df9e43 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sun, 7 Oct 2018 19:32:44 +0300 Subject: [PATCH 37/41] docs/admin-guide: memory-hotplug: remove table of contents Remove "manual" table of contents and leave only the ReST tag so that Sphinx will take care of TOC generation. Signed-off-by: Mike Rapoport Signed-off-by: Jonathan Corbet --- .../admin-guide/mm/memory-hotplug.rst | 21 ------------------- 1 file changed, 21 deletions(-) diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst index 0b9c83effaa479..25157aec5b3190 100644 --- a/Documentation/admin-guide/mm/memory-hotplug.rst +++ b/Documentation/admin-guide/mm/memory-hotplug.rst @@ -13,27 +13,6 @@ be changed often. .. contents:: :local: -.. CONTENTS - - 1. Introduction - 1.1 Purpose of memory hotplug - 1.2. Phases of memory hotplug - 1.3. Unit of Memory online/offline operation - 2. Kernel Configuration - 3. sysfs files for memory hotplug - 4. Physical memory hot-add phase - 4.1 Hardware(Firmware) Support - 4.2 Notify memory hot-add event by hand - 5. Logical Memory hot-add phase - 5.1. State of memory - 5.2. How to online memory - 6. Logical memory remove - 6.1 Memory offline and ZONE_MOVABLE - 6.2. How to offline memory - 7. Physical memory remove - 9. Future Work List - - .. note:: (1) x86_64's has special implementation for memory hotplug. From 418ca3de75cd5e4130a6f2d5bd76ccb8e3f6e461 Mon Sep 17 00:00:00 2001 From: Guillaume Dore Date: Thu, 18 Oct 2018 17:47:50 +0200 Subject: [PATCH 38/41] doc: fix a typo in adding-syscalls.rst There was a typo in adding-syscalls.rst that could mislead developers to add a C filename in a makefile instead of an object filename. This error, while not keeping developers from contributing could slow the development process down by introducing build errors. Signed-off-by: Guillaume Dore Signed-off-by: Jonathan Corbet --- Documentation/process/adding-syscalls.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst index 0d4f29bc798bdc..88a7d5c8bb2fa4 100644 --- a/Documentation/process/adding-syscalls.rst +++ b/Documentation/process/adding-syscalls.rst @@ -232,7 +232,7 @@ normally be optional, so add a ``CONFIG`` option (typically to by the option. - Make the option depend on EXPERT if it should be hidden from normal users. - Make any new source files implementing the function dependent on the CONFIG - option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.c``). + option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.o``). - Double check that the kernel still builds with the new CONFIG option turned off. From cf419d542f1d3de80034ebb0462d9ed9b1ae9277 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 17 Oct 2018 21:07:27 -0700 Subject: [PATCH 39/41] kernel-doc: fix declaration type determination Make declaration type determination more robust. When scripts/kernel-doc is deciding if some kernel-doc notation contains an enum, a struct, a union, a typedef, or a function, it does a pattern match on the beginning of the string, looking for a match with one of "struct", "union", "enum", or "typedef", and otherwise defaults to a function declaration type. However, if a function or a function-like macro has a name that begins with "struct" (e.g., struct_size()), then kernel-doc incorrectly decides that this is a struct declaration. Fix this by looking for the declaration type keywords having an ending word boundary (\b), so that "struct_size" will not match a struct declaration. I compared lots of html before/after output from core-api, driver-api, and networking. There were no differences in any of the files that I checked. Signed-off-by: Randy Dunlap Acked-by: Jani Nikula Tested-by: Kees Cook Signed-off-by: Jonathan Corbet --- scripts/kernel-doc | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/scripts/kernel-doc b/scripts/kernel-doc index 8f0f508a78e9be..ffbe901a37b512 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -1904,13 +1904,13 @@ sub process_name($$) { ++$warnings; } - if ($identifier =~ m/^struct/) { + if ($identifier =~ m/^struct\b/) { $decl_type = 'struct'; - } elsif ($identifier =~ m/^union/) { + } elsif ($identifier =~ m/^union\b/) { $decl_type = 'union'; - } elsif ($identifier =~ m/^enum/) { + } elsif ($identifier =~ m/^enum\b/) { $decl_type = 'enum'; - } elsif ($identifier =~ m/^typedef/) { + } elsif ($identifier =~ m/^typedef\b/) { $decl_type = 'typedef'; } else { $decl_type = 'function'; From 84253c8be37d5f0b54d624be1bd1b90bbbfe14b3 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 17 Oct 2018 16:45:32 -0700 Subject: [PATCH 40/41] docs: Introduce deprecated APIs list As discussed in the "API replacement/deprecation" thread[1], this makes an effort to document what things shouldn't get (re)added to the kernel, by introducing Documentation/process/deprecated.rst. [1] https://lists.linuxfoundation.org/pipermail/ksummit-discuss/2018-September/005282.html Signed-off-by: Kees Cook Signed-off-by: Jonathan Corbet --- Documentation/driver-api/basics.rst | 3 + Documentation/process/deprecated.rst | 119 +++++++++++++++++++++++++++ Documentation/process/index.rst | 1 + 3 files changed, 123 insertions(+) create mode 100644 Documentation/process/deprecated.rst diff --git a/Documentation/driver-api/basics.rst b/Documentation/driver-api/basics.rst index 826e85d50a16b9..e970fadf4d1a58 100644 --- a/Documentation/driver-api/basics.rst +++ b/Documentation/driver-api/basics.rst @@ -121,6 +121,9 @@ Kernel utility functions .. kernel-doc:: kernel/rcu/update.c :export: +.. kernel-doc:: include/linux/overflow.h + :internal: + Device Resource Management -------------------------- diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst new file mode 100644 index 00000000000000..0ef5a63c06badb --- /dev/null +++ b/Documentation/process/deprecated.rst @@ -0,0 +1,119 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================================================== +Deprecated Interfaces, Language Features, Attributes, and Conventions +===================================================================== + +In a perfect world, it would be possible to convert all instances of +some deprecated API into the new API and entirely remove the old API in +a single development cycle. However, due to the size of the kernel, the +maintainership hierarchy, and timing, it's not always feasible to do these +kinds of conversions at once. This means that new instances may sneak into +the kernel while old ones are being removed, only making the amount of +work to remove the API grow. In order to educate developers about what +has been deprecated and why, this list has been created as a place to +point when uses of deprecated things are proposed for inclusion in the +kernel. + +__deprecated +------------ +While this attribute does visually mark an interface as deprecated, +it `does not produce warnings during builds any more +`_ +because one of the standing goals of the kernel is to build without +warnings and no one was actually doing anything to remove these deprecated +interfaces. While using `__deprecated` is nice to note an old API in +a header file, it isn't the full solution. Such interfaces must either +be fully removed from the kernel, or added to this file to discourage +others from using them in the future. + +open-coded arithmetic in allocator arguments +-------------------------------------------- +Dynamic size calculations (especially multiplication) should not be +performed in memory allocator (or similar) function arguments due to the +risk of them overflowing. This could lead to values wrapping around and a +smaller allocation being made than the caller was expecting. Using those +allocations could lead to linear overflows of heap memory and other +misbehaviors. (One exception to this is literal values where the compiler +can warn if they might overflow. Though using literals for arguments as +suggested below is also harmless.) + +For example, do not use ``count * size`` as an argument, as in:: + + foo = kmalloc(count * size, GFP_KERNEL); + +Instead, the 2-factor form of the allocator should be used:: + + foo = kmalloc_array(count, size, GFP_KERNEL); + +If no 2-factor form is available, the saturate-on-overflow helpers should +be used:: + + bar = vmalloc(array_size(count, size)); + +Another common case to avoid is calculating the size of a structure with +a trailing array of others structures, as in:: + + header = kzalloc(sizeof(*header) + count * sizeof(*header->item), + GFP_KERNEL); + +Instead, use the helper:: + + header = kzalloc(struct_size(header, item, count), GFP_KERNEL); + +See :c:func:`array_size`, :c:func:`array3_size`, and :c:func:`struct_size`, +for more details as well as the related :c:func:`check_add_overflow` and +:c:func:`check_mul_overflow` family of functions. + +simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull() +---------------------------------------------------------------------- +The :c:func:`simple_strtol`, :c:func:`simple_strtoll`, +:c:func:`simple_strtoul`, and :c:func:`simple_strtoull` functions +explicitly ignore overflows, which may lead to unexpected results +in callers. The respective :c:func:`kstrtol`, :c:func:`kstrtoll`, +:c:func:`kstrtoul`, and :c:func:`kstrtoull` functions tend to be the +correct replacements, though note that those require the string to be +NUL or newline terminated. + +strcpy() +-------- +:c:func:`strcpy` performs no bounds checking on the destination +buffer. This could result in linear overflows beyond the +end of the buffer, leading to all kinds of misbehaviors. While +`CONFIG_FORTIFY_SOURCE=y` and various compiler flags help reduce the +risk of using this function, there is no good reason to add new uses of +this function. The safe replacement is :c:func:`strscpy`. + +strncpy() on NUL-terminated strings +----------------------------------- +Use of :c:func:`strncpy` does not guarantee that the destination buffer +will be NUL terminated. This can lead to various linear read overflows +and other misbehavior due to the missing termination. It also NUL-pads the +destination buffer if the source contents are shorter than the destination +buffer size, which may be a needless performance penalty for callers using +only NUL-terminated strings. The safe replacement is :c:func:`strscpy`. +(Users of :c:func:`strscpy` still needing NUL-padding will need an +explicit :c:func:`memset` added.) + +If a caller is using non-NUL-terminated strings, :c:func:`strncpy()` can +still be used, but destinations should be marked with the `__nonstring +`_ +attribute to avoid future compiler warnings. + +strlcpy() +--------- +:c:func:`strlcpy` reads the entire source buffer first, possibly exceeding +the given limit of bytes to copy. This is inefficient and can lead to +linear read overflows if a source string is not NUL-terminated. The +safe replacement is :c:func:`strscpy`. + +Variable Length Arrays (VLAs) +----------------------------- +Using stack VLAs produces much worse machine code than statically +sized stack arrays. While these non-trivial `performance issues +`_ are reason enough to +eliminate VLAs, they are also a security risk. Dynamic growth of a stack +array may exceed the remaining memory in the stack segment. This could +lead to a crash, possible overwriting sensitive contents at the end of the +stack (when built without `CONFIG_THREAD_INFO_IN_TASK=y`), or overwriting +memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`) diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index c0b3bd25dbae57..1ddde440f333d8 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -42,6 +42,7 @@ Other guides to the community that are of interest to most developers are: stable-kernel-rules submit-checklist kernel-docs + deprecated These are some overall technical guides that have been put here for now for lack of a better place. From aea74de4b216cdacda797d54220b8ac19daa1bf7 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sat, 13 Oct 2018 10:30:57 +0900 Subject: [PATCH 41/41] docs: Fix typos in histogram.rst This patch fixes some spelling typos. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Acked-by: Steven Rostedt (VMware) Signed-off-by: Jonathan Corbet --- Documentation/trace/histogram.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst index 5ac724baea7d93..7dda76503127b7 100644 --- a/Documentation/trace/histogram.rst +++ b/Documentation/trace/histogram.rst @@ -1765,7 +1765,7 @@ For example, here's how a latency can be calculated:: # echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger -In the first line above, the event's timetamp is saved into the +In the first line above, the event's timestamp is saved into the variable ts0. In the next line, ts0 is subtracted from the second event's timestamp to produce the latency, which is then assigned into yet another variable, 'wakeup_lat'. The hist trigger below in turn @@ -1811,7 +1811,7 @@ the command that defined it with a '!':: /sys/kernel/debug/tracing/synthetic_events At this point, there isn't yet an actual 'wakeup_latency' event -instantiated in the event subsytem - for this to happen, a 'hist +instantiated in the event subsystem - for this to happen, a 'hist trigger action' needs to be instantiated and bound to actual fields and variables defined on other events (see Section 2.2.3 below on how that is done using hist trigger 'onmatch' action). Once that is @@ -1837,7 +1837,7 @@ output can be displayed by reading the event's 'hist' file. A hist trigger 'action' is a function that's executed whenever a histogram entry is added or updated. -The default 'action' if no special function is explicity specified is +The default 'action' if no special function is explicitly specified is as it always has been, to simply update the set of values associated with an entry. Some applications, however, may want to perform additional actions at that point, such as generate another event, or