Skip to content

Latest commit

 

History

History
executable file
·
16 lines (14 loc) · 882 Bytes

quickStart.md

File metadata and controls

executable file
·
16 lines (14 loc) · 882 Bytes
Raw

Quick Start

Burn Tina Firmware

Get the firmware in releases. Extract the tarball and you will get a card image. It could be burned to a SD using dd command:

dd if=fw.bin of=${card} bs=512

where ${card} is the path to the device file (under /dev/) to your card.

Access The Shell via ADB

The firmware is preconfigured so that it works as an ADB USB gadget after booted up. Connect the board via the otg port and if your computer has installed ADB and corresponding drivers, the shell should be prompted after entering

adb shell

Debugging via Serial

The serial prints boot log and kernel messages in addition to the shell prompt. The default debug serial is UART0 at PE3 and PE2. It can be easily connected with a pinheader at the bottom right of the board.