|
4 | 4 | @brief Support for the nRF52 DK |
5 | 5 |
|
6 | 6 | ## Overview: |
7 | | -There are some nameless simple development Boards with an nRF52832 available. |
8 | | -These boards providing access to most SoC ports. There are two buttons (RST, |
9 | | -KEY), two LED’s (Pin 30, 31), a voltage regulator and a current measurement shunt |
10 | | -on board. A serial connection and flashing must be provided by external |
11 | | -Hardware. |
12 | 7 |
|
13 | | -The nRF52832 is a SoC with a 32-bit ARM® Cortex™-M4F CPU with 512KiB Flash and |
14 | | -64KiB RAM. The embedded 2.4GHz transceiver supports Bluetooth low energy, ANT and |
15 | | -proprietary 2.4 GHz protocol stack. It is on air compatible with the nRF51 |
16 | | -Series, nRF24L and nRF24AP Series products from Nordic Semiconductor. |
| 8 | +The |
| 9 | +[nRF52 DK](https://www.nordicsemi.com/Products/Development-hardware/nRF52-DK) |
| 10 | +is a development board featuring the nRF52832 MCU with Arduino compatible |
| 11 | +pin headers and an integrated J-Link programmer, debugger and UART adapter. |
17 | 12 |
|
18 | 13 | ## Hardware: |
19 | | - |
21 | 14 |
|
22 | | -| MCU | NRF52832 | |
23 | | -|:----------------- |:------------------------------------------------------------------------------------- | |
24 | | -| Family | ARM Cortex-M4F | |
25 | | -| Vendor | Nordic Semiconductor | |
26 | | -| RAM | 64KiB | |
27 | | -| Flash | 512KiB | |
28 | | -| Frequency | 64MHz | |
29 | | -| FPU | yes | |
30 | | -| Timers | 5 (32-bit) | |
31 | | -| RTC | 3 | |
32 | | -| ADCs | 1x 12-bit (8 channels) | |
33 | | -| UARTs | 1 | |
34 | | -| SPIs | 3 | |
35 | | -| I2Cs | 2 | |
36 | | -| I2S | 1 | |
37 | | -| PWM | 3*4 Channels | |
38 | | -| Radio | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity | |
39 | | -| Vcc | 1.7V - 3.6V | |
40 | | -| Datasheet | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832) | |
41 | | -| Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf) | |
42 | | - |
43 | | -##Pin layout |
44 | | - |
45 | | -|MCU pin|Board pin|Function| |
46 | | -|:-----------|:-----------|:----------| |
47 | | -|P0.0| n.c. | | |
48 | | -|P0.1| n.c. | | |
49 | | -|P0.2| D07 | | |
50 | | -|P0.3| D08 | | |
51 | | -|P0.4| D09 | KEY | |
52 | | -|P0.5| D10 | | |
53 | | -|P0.6| D13 | | |
54 | | -|P0.7| D14 | | |
55 | | -|P0.8| D15 | | |
56 | | -|P0.9| n.c. | | |
57 | | -|P0.10| n.c. | NFC antenna 2 (unusable) | |
58 | | -|P0.11| D18 | RXD (software defined) | |
59 | | -|P0.12| D19 | TXD (software defined) | |
60 | | -|P0.13| D20 | | |
61 | | -|P0.14| D21 | | |
62 | | -|P0.15| D22 | | |
63 | | -|P0.16| D23 | | |
64 | | -|P0.17| D24 | | |
65 | | -|P0.18| D25 | | |
66 | | -|P0.19| D26 | | |
67 | | -|P0.20| D27 | | |
68 | | -|P0.21| RST | RESET | |
69 | | -|P0.22| D28 | near Radio! -> Low drive, low frequency I/O only. | |
70 | | -|P0.23| D29 | near Radio! -> Low drive, low frequency I/O only. | |
71 | | -|P0.24| D30 | near Radio! -> Low drive, low frequency I/O only. | |
72 | | -|P0.25| D00 | near Radio! -> Low drive, low frequency I/O only. | |
73 | | -|P0.26| D01 | near Radio! -> Low drive, low frequency I/O only. | |
74 | | -|P0.27| D02 | near Radio! -> Low drive, low frequency I/O only. | |
75 | | -|P0.28| D03 | near Radio! -> Low drive, low frequency I/O only. | |
76 | | -|P0.29| D04 | near Radio! -> Low drive, low frequency I/O only. | |
77 | | -|P0.30| D05 | LED0, near Radio! -> Low drive, low frequency I/O only. | |
78 | | -|P0.31| D06 | LED1, near Radio! -> Low drive, low frequency I/O only. | |
79 | | -| | V33 | 3.3V for MCU | |
80 | | -| | D16 | ? | |
81 | | -| | D17 | ? | |
82 | | -| | VBUS | 5V input | |
83 | | -| | GND | | |
84 | | -| | RXD | n.c. | |
85 | | -| | TXD | n.c. | |
86 | | -| | TD0 | n.c. | |
87 | | -| | TD1 | n.c. | |
88 | | -| SWDIO | TMS | | |
89 | | -| SWCLK | TCK | | |
90 | | - |
91 | | -**Caution**: NFC is not usable with this board. |
| 15 | + |
| 16 | + |
| 17 | +| MCU | NRF52832 | |
| 18 | +|:--------------------- |:------------------------------------------------------------------------------------- | |
| 19 | +| Family | ARM Cortex-M4F | |
| 20 | +| Vendor | Nordic Semiconductor | |
| 21 | +| RAM | 64 KiB | |
| 22 | +| Flash | 512 KiB | |
| 23 | +| Frequency | 64 MHz | |
| 24 | +| FPU | yes | |
| 25 | +| Timers | 5 (32-bit) | |
| 26 | +| RTC | 3 | |
| 27 | +| ADCs | 1x 12-bit (8 channels) | |
| 28 | +| UARTs | 1 | |
| 29 | +| SPIs | 3 | |
| 30 | +| I2Cs | 2 | |
| 31 | +| I2S | 1 | |
| 32 | +| PWM | 3*4 Channels | |
| 33 | +| Radio | 2.4GHz BLE compatiple, -20 dBm to +4 dBm output, -96 dBm RX sensitivity | |
| 34 | +| Vcc | 1.7V - 3.6V | |
| 35 | +| MCU Datasheet | [Datasheet](https://www.nordicsemi.com/eng/Products/Bluetooth-low-energy/nRF52832) | |
| 36 | +| MCU Reference Manual | [Reference Manual](https://infocenter.nordicsemi.com/pdf/nRF52832_PS_v1.4.pdf) | |
| 37 | +| Board Datasheet | [User Guide](https://infocenter.nordicsemi.com/pdf/nRF52_DK_User_Guide_v1.3.1.pdf) | |
92 | 38 |
|
93 | 39 | ### RESET pin configuration |
94 | 40 |
|
|
0 commit comments