diff --git a/README.md b/README.md
index 47f1fbfe..8e07fc03 100644
--- a/README.md
+++ b/README.md
@@ -422,7 +422,7 @@ specific to the sensor you are using.
By default, scos-sensor will use `configs/default_calibration.json` as the sensor
calibration file. However, if`configs/sensor_calibration.json` or
`configs/sigan_calibration.json` exist they will be used instead of the default
-calibration file. Sensor calibration files allow scos-sensor to pply a gain based
+calibration file. Sensor calibration files allow scos-sensor to apply a gain based
on a laboratory calibration of the sensor and may also contain other useful
metadata that characterizes the sensor performance. For additional
information on the calibration data, see the
@@ -507,181 +507,13 @@ per second at several frequencies with a signal analyzer reference level setting
}
}
}
- },
- "3575000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:16.211Z",
- "gain": 30.73297444891243,
- "noise_figure": 4.090843866619065,
- "temperature": 15.6
- }
- }
- }
- },
- "3585000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:20.725Z",
- "gain": 30.884253019974623,
- "noise_figure": 3.934553150614483,
- "temperature": 15.6
- }
- }
- }
- },
- "3595000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:24.606Z",
- "gain": 31.002780356672476,
- "noise_figure": 3.940238988552726,
- "temperature": 15.6
- }
- }
- }
- },
- "3605000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:29.724Z",
- "gain": 31.035560147646778,
- "noise_figure": 3.9290832485193989,
- "temperature": 15.6
- }
- }
- }
- },
- "3615000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:33.614Z",
- "gain": 30.935970273145274,
- "noise_figure": 4.006672278350428,
- "temperature": 15.6
- }
- }
- }
- },
- "3625000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:37.592Z",
- "gain": 30.682403307202095,
- "noise_figure": 4.064067195729546,
- "temperature": 15.6
- }
- }
- }
- },
- "3635000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:41.889Z",
- "gain": 30.980340383458626,
- "noise_figure": 3.8826926914916726,
- "temperature": 15.6
- }
- }
- }
- },
- "3645000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:46.450Z",
- "gain": 30.948486357958318,
- "noise_figure": 3.917520438472101,
- "temperature": 15.6
- }
- }
- }
- },
- "3655000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:51.575Z",
- "gain": 30.96859101287636,
- "noise_figure": 3.926017393059535,
- "temperature": 15.6
- }
- }
- }
- },
- "3665000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:55.571Z",
- "gain": 30.618851884796429,
- "noise_figure": 4.225928655860898,
- "temperature": 15.6
- }
- }
- }
- },
- "3675000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:38:59.585Z",
- "gain": 30.552247661443276,
- "noise_figure": 4.171389553033189,
- "temperature": 15.6
- }
- }
- }
- },
- "3685000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:39:03.921Z",
- "gain": 30.413415948237785,
- "noise_figure": 4.42128294424517,
- "temperature": 15.6
- }
- }
- }
- },
- "3695000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:39:09.115Z",
- "gain": 30.112285957420995,
- "noise_figure": 4.576464590847393,
- "temperature": 15.6
- }
- }
- }
- },
- "3705000000.0": {
- "-25": {
- "true": {
- "0": {
- "datetime": "2023-10-23T14:39:13.682Z",
- "gain": 29.120051306906164,
- "noise_figure": 5.2261432005125709,
- "temperature": 15.7
- }
- }
- }
}
}
}
}
```
-When an action is run with the above calibration, scos will expect the action to have
+When an action is run with the above calibration, SCOS will expect the action to have
a sample_rate, frequency, and reference_level specified in the action config. The values
specified for these parameters will then be used to retrieve the calibration data.