Led information display using hub75 64x64 panel and Raspberry Pi Zero W to control it. Scripts included polls and displays data from different sources.
Display is custom build using 64x64 P2.5 HUB75e display module. It is connected to raspberry pi using https://github.com/hzeller/rpi-rgb-led-matrix library, which includes information about hardware connections. Display case includes DC/DC converter and temperature, pressure, and light sensors.
/boot/config.txt and /boo/cmdline.txt for RPi are included as these have important performance optimizations enabled. Following services are removed
sudo systemctl disable keyboard-setup.service
sudo systemctl disable apt-daily.service
sudo systemctl disable hciuart.service
sudo systemctl disable triggerhappy.service
sudo systemctl disable bluetooth.service
sudo systemctl disable [email protected]
sudo apt-get purge bluez -yes
sudo nano /etc/modprobe.d/raspi-blacklist.conf
blacklist snd_bcm2835
Following python packets are needed:
sudo pip3 install adafruit-circuitpython-bmp280
sudo pip3 install adafruit-circuitpython-busdevice
sudo pip3 install adafruit-gpio
git clone https://github.com/THP-JOE/Python_SI1145
git clone https://github.com/hzeller/rpi-rgb-led-matrix
This is main display program. It handles all data sources and graphics.