Skip to content

Latest commit

 

History

History
67 lines (56 loc) · 2.05 KB

README.md

File metadata and controls

67 lines (56 loc) · 2.05 KB

Hello_World_RadioLib_Heltec-V3_SX1262

Hello World example code for the new Heltec WiFi LoRa 32 (V3) board with LoRa SX1262 chip

Setup

I use, as metioned, the Heltec WiFi LoRa 32 (V3) and vsc with the platformio plugin. My PlatformIO Configuration looks like this and can be found her.

[env:esp32dev]
platform = espressif32
board = esp32-s3-devkitc-1
framework = arduino
lib_deps = 
	olikraus/U8g2@^2.34.13
	jgromes/RadioLib@^5.6.0

Note: i don't use a heltec board, as you can see here (board = esp32-s3-devkitc-1) and, because of that i didn't rely on the pins_arduino.hin platformio\packages\framework-arduinoespressif32\variants\heltec_WIFI_LoRa_32_V3.

Pins for LoRa Chip and OLED on Heltec WiFi LoRa 32 (V3)

According to the schematic Diagram (WORKS)

LoRa sx1262

lora_nss: 8 //same as cs
lora_rst: 12 //same as nrst
dio1: 14 //same as irq, first interrupt/GPIO
lora_busy: 13 //same as gpio Pin, second interrupt/GPIO
lora_sck: 9
lora_miso: 11
lora_mosi: 10

OLED

oled_scl: 18
oled_sda: 17
oled_rst: 21

// new u8g2 library
U8G2_SSD1306_128X64_NONAME_1_SW_I2C u8g2(U8G2_R0, /* clock=*/18, /* data=*/17, /* reset=*/21);

// old u8x8 library
U8X8_SSD1306_128X64_NONAME_SW_I2C u8x8(scl, sda, rstOlcd);

According to scan and pins_arduino.h (WRONG)

MOSI: 11
MISO: 13
SCK: 12
SS: 10

Pins from the RadioLib Example

SX1262 has the following connections:
NSS pin:   10 (cs Pin)
DIO1 pin:  2 (irq Pin)
NRST pin:  3 (rst pin) 
BUSY pin:  9 (gpio Pin)
SX1262 radio = new Module(10, 2, 3, 9);
Module(cs, irq, rst, gpio)

hmu if you have any questions, maybe i can help (::