There are many ways to debug ANGLE using generic or platform-dependent tools. Here is a list of tips on how to use them.
Apitrace captures traces of OpenGL commands for later analysis,
allowing us to see how ANGLE translates OpenGL ES commands. In order to capture the trace, it
inserts a driver shim using LD_PRELOAD that records the command and then forwards it to the OpenGL
driver.
The problem with ANGLE is that it exposes the same symbols as the OpenGL driver so apitrace captures the entry point calls intended for ANGLE and reroutes them to the OpenGL driver. In order to avoid this problem, use the following:
- Link your application against the static ANGLE libraries (libGLESv2_static and libEGL_static) so they don't get shadowed by apitrace's shim.
- Ask apitrace to explicitly load the driver instead of using a dlsym on the current module.
Otherwise apitrace will use ANGLE's symbols as the OpenGL driver entrypoint (causing infinite
recursion). To do this you must point an environment variable to your GL driver. For example:
export TRACE_LIBGL=/usr/lib/libGL.so.1. You can find your libGL withldconfig -p | grep libGL. - Link ANGLE against libGL instead of dlsyming the symbols at runtime; otherwise ANGLE won't use
the replaced driver entry points. This is done with the gn arg
angle_link_glx = true.
If you follow these steps, apitrace will work correctly aside from a few minor bugs like not being able to figure out what the default framebuffer size is if there is no glViewport command.
For example, to trace a run of hello_triangle, assuming the apitrace executables are in $PATH:
gn args out/Debug # add "angle_link_glx = true"
# edit samples/BUILD.gn and append "_static" to "angle_util", "libEGL", "libGLESv2"
ninja -C out/Debug
export TRACE_LIBGL="/usr/lib/libGL.so.1" # may require a different path
apitrace trace -o mytrace ./out/Debug/hello_triangle
qapitrace mytrace
Normally, ANGLE only logs errors and warnings (e.g. to Android logcat). General logging, or additional levels of "trace" messages will be logged when the following GN arg is set:
angle_enable_trace = true
To log all GLES and EGL commands submitted by an application, including the following flag:
angle_enable_trace_events = true
If you want to enable INFO-level logs (and up) without incuring the log spam
of angle_enable_trace, you can instead use the following flag:
angle_always_log_info = true
Android is built as an Android APK, which makes it more difficult to debug an APK that is using ANGLE. The following information can allow you to debug ANGLE with LLDB.
- You need to build ANGLE with debug symbols enabled. Assume your build variant is called Debug. Make sure you have these lines in out/Debug/args.gn
is_component_build = false
is_debug = true
is_official_build = false
symbol_level = 2
strip_debug_info = false
ignore_elf32_limitations = true
angle_extract_native_libs = true
The following local patch may also be necessary:
diff --git a/build/config/compiler/compiler.gni b/build/config/compiler/compiler.gni
index 96a18d91a3f6..ca7971fdfd48 100644
--- a/build/config/compiler/compiler.gni
+++ b/build/config/compiler/compiler.gni
@@ -86,7 +86,8 @@ declare_args() {
# Whether an error should be raised on attempts to make debug builds with
# is_component_build=false. Very large debug symbols can have unwanted side
# effects so this is enforced by default for chromium.
- forbid_non_component_debug_builds = build_with_chromium
+ forbid_non_component_debug_builds = false
Build/install/enable ANGLE apk for your application following other instructions.
- Modify gdbclient.py script to let it find the ANGLE symbols.
diff --git a/scripts/gdbclient.py b/scripts/gdbclient.py
index 61fac4000..1f43f4f64 100755
--- a/scripts/gdbclient.py
+++ b/scripts/gdbclient.py
@@ -395,6 +395,8 @@ def generate_setup_script(debugger_path, sysroot, linker_search_dir, binary_file
vendor_paths = ["", "hw", "egl"]
solib_search_path += [os.path.join(symbols_dir, x) for x in symbols_paths]
solib_search_path += [os.path.join(vendor_dir, x) for x in vendor_paths]
+ solib_search_path += ["/your_path_to_chromium_src/out/Debug/lib.unstripped/"]
if linker_search_dir is not None:
solib_search_path += [linker_search_dir]
- Start your lldbclient.py from
/your_path_to_chromium_src/out/Debugfolder. This adds the ANGLE source-file paths to what is visible to LLDB, which allows LLDB to show ANGLE's source files. Refer to https://source.android.com/devices/tech/debug/gdb for how to attach the app for debugging. - If you are debugging angle_perftests, you can use
--shard-timeout 100000000to disable the timeout so that the test won't get killed while you are debugging. If the test runs too fast that you don't have time to attach, use--delay-test-start=60to give you extra time to attach.
ANGLE can emit debug-utils markers for every GLES API command that are visible to both Android GPU Inspector (AGI) and RenderDoc. This support requires enabling general logging as well as setting the following additional GN arg:
angle_enable_annotator_run_time_checks = true
In addition, if the following GN arg is set, the API calls will output to Android's logcat:
angle_enable_trace_android_logcat = true
Once compiled, the markers need to be turned on.
On Android, debug markers are turned on and off with an Android debug property that is automatically deleted at the next reboot:
adb shell setprop debug.angle.markers 1
- 0: Turned off/disabled (default)
- 1: Turned on/enabled
On desktop, debug markers are turned on and off with the ANGLE_ENABLE_DEBUG_MARKERS environment variable (set in OS-specific manner):
- 0: Turned off/disabled (default)
- 1: Turned on/enabled
ANGLE can output Vulkan API call information including detailed parameter info and state. Vulkan call logging is available for ANGLE debug builds, builds with asserts enabled, or can be made available on any build by setting the following GN arg:
angle_enable_vulkan_api_dump_layer = true
By default Vulkan call logging goes to stdout, or logcat on Android. Vulkan call logging can be used with trace event and debug marker output as shown in enabling general logging and enabling Debug-Utils markers
To log Vulkan calls on desktop set the environment variable ANGLE_ENABLE_VULKAN_API_DUMP_LAYER to 1.
For Vulkan call logging output to a file, set
the environment variable VK_APIDUMP_LOG_FILENAME to the correct location.
To show only Vulkan api calls without verbose parameter details set the environment variable
VK_APIDUMP_DETAILED to false
Activate Vulkan call logging on Android by setting this Android debug property that is automatically deleted at the next reboot:
adb shell setprop debug.angle.enable_vulkan_api_dump_layer 1
For Vulkan call logging to a file on Android, specify the filename with an Android debug property that is automatically deleted at the next reboot:
adb shell setprop debug.apidump.log_filename /data/data/[PACKAGE_NAME, i.e., com.android.angle.test for angle_trace_tests]/api_dump.txt
Similarly, detailed parameter output can be controlled by the following Android debug properties:
adb shell setprop debug.apidump.detailed false
GAPID can be used to capture trace of Vulkan commands on Linux.
When capturing traces of gtest based tests built inside Chromium checkout, make sure to run the
tests with --single-process-tests argument.
GAPID can be used to capture a trace of the Vulkan or OpenGL ES command stream on Android. For it to work, ANGLE's libraries must have different names from the system OpenGL libraries. This is done with the gn arg:
angle_libs_suffix = "_ANGLE_DEV"
All
AngleNativeTest
based tests share the same activity name, com.android.angle.test.AngleUnitTestActivity.
Thus, prior to capturing your test trace, the specific test APK must be installed on the device.
When you build the test, a test launcher is generated, for example,
./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run this test
launcher once.
In GAPID's "Capture Trace" dialog, "Package / Action:" should be:
android.intent.action.MAIN:com.android.angle.test/com.android.angle.test.AngleUnitTestActivity
The mandatory extra intent
argument for starting the
activity is org.chromium.native_test.NativeTest.StdoutFile. Without it the test APK crashes. Test
filters can be specified via either the org.chromium.native_test.NativeTest.CommandLineFlags or
the org.chromium.native_test.NativeTest.GtestFilter argument. Example "Intent Arguments:" values in
GAPID's "Capture Trace" dialog:
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"
or
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt --e org.chromium.native_test.NativeTest.GtestFilter RendererTest.SimpleOperation/ES2_VULKAN:SimpleOperationTest.DrawWithTexture/ES2_VULKAN
An application running through ANGLE can confuse RenderDoc, as RenderDoc hooks to EGL and ends up tracing the calls the application makes, instead of the calls ANGLE makes to its backend. As ANGLE is a special case, there's little support for it by RenderDoc, though there are workarounds.
On Windows, RenderDoc supports setting the environment variable RENDERDOC_HOOK_EGL to 0 to avoid
this issue.
On Linux, there is no supported workaround by RenderDoc. See this issue. To capture Vulkan traces, the workaround is to build RenderDoc without GL(ES) support.
Building RenderDoc is straightforward. However, here are a few instructions to keep in mind.
# Install dependencies based on RenderDoc document. Here are some packages that are unlikely to be already installed:
$ sudo apt install libxcb-keysyms1-dev python3-dev qt5-qmake libqt5svg5-dev libqt5x11extras5-dev
# Inside the RenderDoc directory:
$ cmake -DCMAKE_BUILD_TYPE=Release -Bbuild -H. -DENABLE_GLES=OFF -DENABLE_GL=OFF
# QT_SELECT=5 is necessary if your distribution doesn't default to Qt5
$ QT_SELECT=5 make -j -C build
# Run RenderDoc from the build directory:
$ ./build/bin/qrenderdoc
If your distribution does not provide a recent Vulkan SDK package, you would need to manually install that. This script tries to perform this installation as safely as possible. It would overwrite the system package's files, so follow at your own risk. Place this script just above the extracted SDK directory.
#! /bin/bash
if [ $# -lt 1 ]; then
echo "Usage: $0 <version>"
exit 1
fi
ver=$1
if [ ! -d "$ver" ]; then
echo "$ver is not a directory"
fi
# Verify everything first
echo "Verifying files..."
echo "$ver"/x86_64/bin/vulkaninfo
test -f "$ver"/x86_64/bin/vulkaninfo || exit 1
echo "$ver"/x86_64/etc/explicit_layer.d/
test -d "$ver"/x86_64/etc/explicit_layer.d || exit 1
echo "$ver"/x86_64/lib/
test -d "$ver"/x86_64/lib || exit 1
echo "Verified. Performing copy..."
echo sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo
sudo cp "$ver"/x86_64/bin/vulkaninfo /usr/bin/vulkaninfo
echo sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/
sudo cp "$ver"/x86_64/etc/explicit_layer.d/* /etc/explicit_layer.d/
echo sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so*
sudo rm /usr/lib/x86_64-linux-gnu/libvulkan.so*
echo sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/
sudo cp -P "$ver"/x86_64/lib/lib* /usr/lib/x86_64-linux-gnu/
echo "Done."
If you are on Linux, make sure not to use the build done in the previous section. The GL renderer disabled in the previous section is actually needed in this section.
# Inside the RenderDoc directory:
# First delete the Cmake Cache in build/ directory
rm build/CMakeCache.txt
# Then build RenderDoc with cmake:
cmake -DCMAKE_BUILD_TYPE=Release -Bbuild -H.
QT_SELECT=5 make -j -C build
Follow Android Dependencies on Linux to download dependency files.
Define the following environment variables, for example in .bashrc (values are examples):
export JAVA_HOME=<path_to_jdk_root>
export ANDROID_SDK=<path_to_sdk_root>
export ANDROID_NDK=<path_to_ndk_root>
export ANDROID_NDK_HOME=<path_to_ndk_root>
In the renderdoc directory, create Android builds of RenderDoc:
mkdir build-android-arm32
cd build-android-arm32/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=armeabi-v7a ..
make -j
cd ../
mkdir build-android-arm64
cd build-android-arm64/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=arm64-v8a ..
make -j
cd ../
Note that you need both arm32 and arm64 builds even if working with an arm64 device. See RenderDoc's documentation for more information.
When you run RenderDoc, choose the "Replay Context" from the bottom-left part of the UI (defaults to Local). When selecting the device, you should see the RenderDoc application running.
In ANGLE itself, make sure you add a suffix for its names to be different from the system's. Add this to gn args:
angle_libs_suffix = "_ANGLE_DEV"
Next, you need to install an ANGLE test APK. When you build the test, a test launcher is generated,
for example, ./out/Release/bin/run_angle_end2end_tests. The best way to install the APK is to run
this test launcher once.
In RenderDoc, use com.android.angle.test/com.android.angle.test.AngleUnitTestActivity as the
Executable Path, and provide the following arguments:
-e org.chromium.native_test.NativeTest.StdoutFile /sdcard/chromium_tests_root/out.txt -e org.chromium.native_test.NativeTest.CommandLineFlags "--gtest_filter=*ES2_VULKAN"
Note that in the above, only a single command line argument is supported with RenderDoc. If testing
dEQP on a non-default platform, the easiest way would be to modify GetDefaultAPIName() in
src/tests/deqp_support/angle_deqp_gtest.cpp (and avoid --use-angle=X).
You should be able to download the latest RenderDoc on Windows and follow the RenderDoc Official Documentation for instructions on how to use RenderDoc on Android. If you would like to build RenderDoc for Android on Windows yourself, you can follow the RenderDoc Officual Documentation. We listed more detailed instructions below on how to set up the build on Windows.
On windows, we need to install dependencies to build android, as described in RenderDoc Official Documentation
-
Install Android SDK.
Add a new system variable:
Variable: ANDROID_SDK
Value: path_to_sdk_directory (e.g. C:\Users\test\Appdata\Local\Android\Sdk)
-
Install Android NDK.
Add a new system variable:
Variable: ANDROID_NDK
Value: path_to_ndk_directory (e.g. C:\Users\test\Appdata\Local\Android\Sdk\ndk\23.1.7779620)
-
Install Java 8.
Add a new system variable:
Variable: JAVA_HOME
Value: path_to_jdk1.8_directory (e.g. C:\Program Files\Java\jdk1.8.0_311)
-
Install Android Debug Bridge.
Append android_sdk_platform-tools_directory to the Path system variable.
e.g. C:\Users\Test\AppData\Local\Android\Sdk\platform-tools
- Install a bash shell. Git Bash comes with Git installation on Windows should work.
- Install make. Add the path to bin folder of GnuWin32 to the Path system variable.
If you are using the Git Bash that comes with MinGW generator, you can run below commands to build Android APK
mkdir build-android-arm32
cd build-android-arm32/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=armeabi-v7a -G "MinGW Makefiles" ..
make -j
cd ../
mkdir build-android-arm64
cd build-android-arm64/
cmake -DBUILD_ANDROID=On -DANDROID_ABI=arm64-v8a -G "MinGW Makefiles" ..
make -j
cd ../
If the generator type of the bash shell you are using is different from MinGW, replace the "MinGW" in the above cmake command with the generator type you are using, as described in RenderDoc Official Documentation.
- cmake command errors
Error: Failed to run MSBuild command:
C:/Program Files (x86)/Microsoft Visual Studio/2019/Professional/MSBuild/Current/Bin/MSBuild.exe to get the value of
VCTargetsPath:
error : The BaseOutputPath/OutputPath property is not set for project 'VCTargetsPath.vcxproj'.
Please check to make sure that you have specified a valid combination of Configuration and Platform for this project.
Configuration='Debug' Platform='x64'.
This is due to the cmake command is using Visual Studio as the generator type. Run the cmake command with the generator type "MinGW Makefiles" or "MSYS Makefiles".
Error: Does not match the generator used previously
Delete the CMakeCache file in build directories build-android-arm64/ or build-android-arm32/.
- make command errors
-Djava.ext.dirs is not supported.
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Downgrade Java JDK version to Java 8.
-
Build arm32 and arm64 android packages. See instructions in the above section.
-
Uninstall the renderdoc package.
This step is required if you have installed / used RenderDoc on the same Android device before. RenderDoc only pushes the renderdoccmd APK to the Android device if it finds the version of the existing APK on the device is different from the version of the APK we are going to install, and the version is dictated by the git hash it was built from. Therefore any local modifications in the RenderDoc codebase would not get picked up if we don't uninstall the old APK first.
adb uninstall org.renderdoc.renderdoccmd.arm64
adb uninstall org.renderdoc.renderdoccmd.arm32
- Build renderdoc on windows desktop by clicking "build solution" in visual studio.
- Launch renderdoc from visual studio, and push the android packages to android device by selecting the connected device at the bottom left corner.
RenderDoc allows us to add and configure customized shader processing tools: https://renderdoc.org/docs/window/settings_window.html#shader-processing-tools-config.
To configure RenderDoc to display shader source code in GLSL, instead of spirv, follow the below steps:
- Get the SPIRV-Cross tool:
Clone the SPIRV-Cross git repo: https://github.com/KhronosGroup/SPIRV-Cross:
git clone https://github.com/KhronosGroup/SPIRV-Cross.git
Compile the SPIRV-Cross:
# inside SPIRV-Cross directory
make
- Open Shader Viewer Settings window: RenderDoc -> Tools -> Settings, and select Shader Viewer on the left.
- Click Add on the bottom to add a new tool, and fill the new tool details:
| Item | Value |
|---|---|
| Name | SPIRV-CROSS |
| Tool Type | SPIRV-Cross |
| Executable | /spirv-cross |
- Restart RenderDoc.
Many of ANGLE's OpenGL ES entry points are exposed in Chromium as WebGL 1.0 and WebGL 2.0 APIs that are available via JavaScript. For testing purposes, custom ANGLE builds may be injected in Chrome Canary.
- Download and install Google Chrome Canary.
- Build ANGLE x64, Release.
- Run
python scripts\update_chrome_angle.pyto replace Canary's ANGLE with your custom ANGLE (note: Canary must be closed).
- Install Google Chrome Dev (via apt, or otherwise). Expected installation directory is
/opt/google/chrome-unstable. - Build ANGLE for the running platform.
is_component_build = falseis suggested in the GN args. - Run
python scripts/update_chrome_angle.pyto replace Dev's ANGLE with your custom ANGLE - Add ANGLE's build path to the
LD_LIBRARY_PATHenvironment variable.
- Download and install Google Chrome Canary.
- Build ANGLE for the running platform; GN args should contain
is_debug = false. - Run
./scripts/update_chrome_angle.pyto replace Canary's ANGLE with your custom ANGLE.
Run Chrome:
- On Windows:
%LOCALAPPDATA%\Google\Chrome SxS\chrome.exe - On Linux:
/opt/google/chrome-unstable/google-chrome-unstable - On macOS:
./Google\ Chrome\ Canary.app/Contents/MacOS/Google\ Chrome\ Canary
With the following command-line options:
--use-cmd-decoder=passthrough --use-gl=angleand one of--use-angle=d3d9(Direct3D 9 renderer, Windows only)--use-angle=d3d11(Direct3D 11 renderer, Windows only)--use-angle=d3d11on12(Direct3D 11on12 renderer, Windows only)--use-angle=gl(OpenGL renderer)--use-angle=gles(OpenGL ES renderer)--use-angle=vulkan(Vulkan renderer)--use-angle=swiftshader(SwiftShader renderer)--use-angle=metal(Metal renderer, macOS only)
Additional useful options:
--enable-logging: To see logs--disable-gpu-watchdog: To disable Chromium's watchdog, killing the GPU process when slow (due to a debug build for example)--disable-gpu-sandbox: To disable Chromium's sandboxing features, if it's getting in the way of testing.--disable-gpu-compositing: To make sure only the WebGL test being debugged is run through ANGLE, not the entirety of Chromium.