MockRequests

Mocks network requests with desired static and dynamic responses automatically so you never have to change your source code to use mocks ever again.

Backed and Used by:

Features

This library was made for the purpose of allowing developers to be able to continue to write code as normal even when their APIs are down, haven't been developed by back-end teams yet, or don't have internet at all. It provides a quick, single point of entry that can be called once and will work throughout your entire app.

In particular, most other network-mocking libraries are not user friendly in that they either:

Force users to re-write their source code to use mocks and then change it back later in order to use real network requests, or
Involve complex setup using local servers and proxies, usually in ways that are app-specific and aren't easily transferable to other projects.

This library differs from the others in that it allows you to continue writing code as normal while still using mock network activity.

Specific benefits provided by this library that aren't offered in others:

You never have to change your source code. This means no more replacing fetch() with Promise.resolve(mockResponse), and no changing URLs from website.com/api to third-party-mocks.com/api.
No painful configuration of complex node servers, proxies, or anything else to host mock data. This also means no need to change URLs from website.com/api to localhost/api.
Full support for use along with third-party libraries, including Axios and jest, so they function as normal while still giving you the mocks you want.
Dynamically update mock responses based on request payloads, previous mock responses, and query parameters in order to mimic back-end alterations of data.
Query parameter parsing so you can mock all URLs with the same pathname using the same dynamic response function.
Customizable mock response delays to mimic natural network resolution times.
Mix mocks with real API calls so you can use both functional and non-functional endpoints simultaneously.
Simple configuration to split mock code from production code and/or activate mocks via terminal (e.g. MOCK=true npm start).
No confusing interfaces or multi-step procedures to getting started. Simply configure it once and you're good to go. This becomes extremely useful if you want to switch app-wide mocks between different logins when developing.
Greatly simplify API testing. Just define fetch and/or XMLHttpRequest in a test setup file and configure MockRequests with the responses you expect. It will handle all the heavy-lifting of mocking network responses for you so you don't have to repetitively use e.g. fetch = jest.fn(). See an example of the one-and-done configuration and testing in the demo.
Compatible with all JavaScript environments, including back-end Node scripts, as long as either fetch or XMLHttpRequest are defined and used in that environment (natively or by polyfill).

Installation

Using npm (see the npm package):

npm install --save-dev mock-requests
Using git:
- Via npm:
  
  npm install --save-dev https://github.com/D-Pow/mock-requests.git
- With locally installed repo:
  
  git clone https://github.com/D-Pow/mock-requests.git
  
  package.json:
  
  "mock-requests": "file:<pathToCloneLocation>/mock-requests

Usage

API docs can be viewed in the JSDoc along with a live demo.

This library wraps XMLHttpRequest and fetch such that any network request to a configured URL will return the specified mock response instead of actually making the network requests. Otherwise, if a URL hasn't been configured with a mock response, the standard async request is made.

MockRequests was designed to be used in such a way that wherever you configure it, the entire app experiences the effects. This means you could configure it in one file and then all other files that make network requests to the configured URLs will receive the mock responses instead, even without importing MockRequests. This makes it very easy to work on the front-end even if some APIs are down, haven't been developed yet, or if you have no internet access at all.

Quick note about usage in back-end or NodeJS scripts

TL;DR: It is highly recommended to use isomorphic-fetch for any back-end/NodeJS scripts since it "just works" throughout your entire app just like MockRequests does.

Network requests in general

MockRequests generally works with any third-party library because it doesn't alter the library itself, it only changes how fetch/XMLHttpRequest work. As such, jest, axios, etc. aren't affected since they only provide wrappers around the above without changing how they work.

However, MockRequests relies on those network functions being defined globally before being imported. So, if using a library that modifies those functions/objects, like node-fetch does, you must heed their warnings to add fetch, Headers, etc. as global variables before importing/require-ing MockRequests. In fact, this is exactly what isomorphic-fetch does - it imports node-fetch and then sets all the global variables for you (just like node-fetch itself recommends) so you don't have to.

In other words, this is the easiest way to make (and mock) network requests:

// [any].mjs
import 'isomorphic-fetch'; // Automatically mocks `fetch()` globally for all files!
import MockRequests from 'mock-requests';

MockRequests.configure({
    [apiUrl]: { myKey: 'myVal' },
});

fetch(apiUrl); // Mocked easily and automatically!

as opposed to being forced to call global.fetch() instead of fetch():

// app.mjs
import * as NodeFetch from 'node-fetch';
// Don't import `fetch`/`Headers` individually to avoid polluting the script's namespace.
// Otherwise, you'd have to use `global.fetch(url, options)` so `global.fetch` is used
// rather than the local `fetch` function.
global.fetch = NodeFetch.default;
global.Headers = NodeFetch.Headers;

// Force `global[field] = field` to be set before importing MockRequests
const MockRequests = (await import('mock-requests')).default;

fetch(apiUrl); // Mocked, but cumbersome to setup. Same regardless of MJS or CJS.



// app.cjs equivalent

/* node-fetch@>=3 */
const NodeFetch = await import('node-fetch');
// Same concept as in MJS: Don't pollute the namespace to use `global.fetch` by default
global.fetch = NodeFetch.default;
global.Headers = NodeFetch.Headers;

const MockRequests = require('mock-requests');
// ... mock configuration/network calls

/* node-fetch@<=2 */
global.fetch = require('node-fetch');
global.Headers = fetch.Headers;

const MockRequests = require('mock-requests');
// ... mock configuration/network calls

or, alternatively, being forced to extract the polyfills to a separate file:

// NetworkPolyfill.mjs
import fetch, { Headers } from 'node-fetch';

global.fetch = fetch;
global.Headers = Headers;


// app.mjs
import './NetworkPolyfill.js'; // Must be imported before MockRequests
import MockRequests from 'mock-requests';

MockRequests.configureDynamicResponses(...);

fetch(apiUrl); // Mocked, but requires splitting of network-setup logic to a separate file.

Network requests using Axios in NodeJS

Currently, MockRequests only mocks fetch and XMLHttpRequest. When used in NodeJS scripts, Axios attempts using XHR first and falls back to using the NodeJS http/https modules if it doesn't exist (source code ref). Thus, an XHR polyfill must be added to use Axios in the live NodeJS code (but not Jest tests, as described in Features).

Furthermore, there is a bug in the NodeJS xmlhttprequest package caused by them not following the correct WHATWG standard. Until MockRequests adds native support for the NodeJS http/https modules, an XHR polyfill library (like the one mentioned here) will have to be used in order to use Axios in back-end source code. In order to do so, write your code in a similar fashion to that described above:

/* app.mjs */
// Don't pollute namespace by using dynamic imports
global.XMLHttpRequest = (await import('xmlhttprequest')).XMLHttpRequest;
// Force global fields to be defined before defining MockRequests and Axios
const MockRequests = (await import('mock-requests')).default;
const axios = (await import('axios')).default;
// ... your logic


/* app.js */
// First, the polyfill
global.XMLHttpRequest = require('xmlhttprequest').XMLHttpRequest;
// Next, MockRequests
const MockRequests = require('mock-requests');
// Finally, Axios
const axios = require('axios');
// ... your logic

Examples

Note how in the below examples, the production-bound code doesn't change between mocking and using network calls.

Static responses

Basic configuration

To configure global app usage of MockRequests, simply call configure() with an object containing URL-responseObject mappings.

// This is the only code you need to add to use this library
// Add in the MockConfig.js file described in the "Separating
// mocks from source code" section
import MockRequests from 'mock-requests';
import {
    myApiUrl,   // 'https://example.com/api/vx/someApi'
    anotherUrl  // '192.168.0.1'
} from '../src/services/Urls.js';

const myApiMockResponse = { someJson: 'responseObject' };
const anotherUrlMockResponse = '<html>some other type of response</html>';

MockRequests.configure({
    [myApiUrl]: myApiMockResponse,
    [anotherUrl]: anotherUrlMockResponse
});

// ...source code

// Using your async requests in source code
// This stays the same regardless of if you're using mocks or the actual endpoint
const jsonResponse = await fetch(myApiUrl).then(res => res.json());
const htmlResponse = await fetch(anotherUrl).then(res => res.text());

useResponseContentAsNormal(jsonResponse);
useResponseContentAsNormal(htmlResponse);

Alternatively, you could configure URL-response content individually:

// same URLs and mock responses from above
import MockRequests from 'mock-requests';

MockRequests.setMockUrlResponse(myApiUrl, myApiMockResponse);
MockRequests.setMockUrlResponse(anotherUrl, anotherUrlMockResponse);

Mixing mocks with actual API calls

In the event that some APIs are not functioning correctly but others are, you can configure the broken APIs using MockRequests and then leave the other APIs as-is for normal responses:

import MockRequests from 'mock-requests';
import { nonfunctionalApi } from '../src/services/Urls.js';

MockRequests.setMockUrlResponse(nonfunctionalApi, /* mock response */);

// ...source code

// Will receive mock
const mockedResponse = await fetch(nonfunctionalApi).then(res => res.json());
// Will receive actual API response
const realApiResponse = await fetch(functionalApi).then(res => res.json());

useResponseContent(mockedResponse);
useResponseContent(realApiResponse);

Dynamic responses

Modifying responses by payload

This library also supports dynamically updating your mocked APIs' responses, so as to mimic actual back-end systems. To utilize this feature, you'll need to call the dynamic counterparts of configure/setMockUrlResponse (configureDynamicResponses/setDynamicMockUrlResponse) along with a slightly modified config object that has response and dynamicResponseModFn fields:

import MockRequests from 'mock-requests';
import { myApiUrl } from '../src/services/Urls.js';

const initialMockResponse = {
    data: ['a', 'b', 'c', 'd', 'e'],
    value: 7
};
const dynamicConfig1 = {
    [myApiUrl]: {
        // The desired response is now nested inside the `response` property.
        // This will be the initial default value of the `response` parameter
        // in the function below, but won't be used after that.
        response: initialMockResponse,
        // The dynamicResponseModFn takes in the request and previous
        // response as arguments to produce the new response.
        // The new response **must** be returned from this function.
        // Feel free to modify `response` as it will be deep-copied later.
        dynamicResponseModFn: (request, response) => {
            // Mix both request and response data to generate new response
            response.data = response.data.concat(request.addLettersArray);
            response.value += request.valueModification;

            return response; // is actually now the new response
        }
    }
};

MockRequests.configureDynamicResponses(dynamicConfig1);

// ...source code

const payload = {
    addLettersArray: ['f', 'g'],
    valueModification: 5
};
const myDynamicallyModifiedResponse = await fetch(myApiUrl, {
    body: JSON.stringify(payload)
}).then(res => res.json());

console.log(myDynamicallyModifiedResponse)

/* Will output:
{
    data: ['a', 'b', 'c', 'd', 'e', 'f', 'g'],
    value: 12
}
*/

Modifying responses by query parameters

Additionally, the dynamicResponseModFn will receive an object containing query parameters from the request URL, which means you also have the option to generate dynamic responses based on those.

If you want to mock all URLs with the same pathname but different query parameters, simply add usePathnameForAllQueries: true to your dynamic mock configuration.

Regardless of if you set usePathnameForAllQueries or not, dynamicResponseModFn will still receive the queryParamMap.

import {
    searchApiPathname  // 'https://example.com/search'  e.g. search?q=weather
} from '../src/services/Urls.js';

MockRequests.setDynamicMockUrlResponse(searchApiPathname, {
    // `response` field not needed because we don't need an initial `response` value
    dynamicResponseModFn: (request, response, queryParamMap) => {
        const searchQuery = decodeURIComponent(queryParamMap.q);
        return `You searched for ${searchQuery}`;
    },
    usePathnameForAllQueries: true
});

// ...source code

const searchQuery = getSearchFromTextInput(); // let's assume this is `weather`
const searchUrl = `${searchApiPathname}?q=${encodeURIComponent(searchQuery)}`;
const response = await fetch(searchUrl).then(res => res.text());

console.log(response);

/* Will output:
'You searched for weather'
*/

Delaying resolution time

There is also a delay option you can use if you want to mimic network delays:

// or configureDynamicResponses({ [myApiUrl]: {...} })
MockRequests.setDynamicMockUrlResponse(myApiUrl, {
    response: myMockResponse,
    dynamicResponseModFn: (req, res, queries) => {/* ... */},
    delay: 1500   // will make fetch take 1.5 seconds to resolve myApiUrl
});

Customizing response properties

By default, MockRequests mocks XMLHttpRequest and fetch such that the response is always valid, setting the corresponding attributes' values as seen below. If you want to change any of these, use the responseProperties field of the configureDynamicResponses()/setDynamicMockUrlResponse() config objects.

For example, set responseProperties.headers to an object of HTTP header key/value pairs to change the response headers for both XMLHttpRequest and fetch, e.g. to change the status code from 200 to 400.

Note: The status(Text) properties are separate from the status HTTP header and need to be changed separately.

For XMLHttpRequest:

xhr.readyState = 4;
xhr.response = mockedResponse;
xhr.responseText = stringVersionOf(mockedResponse); // e.g. JSON.stringify(mockedResponse)
xhr.responseUrl = urlPassedInXhrOpenMethod;
xhr.status = 200;
xhr.statusText = 'OK';
xhr.timeout = 0;

For fetch().then(response => ...):

response.status = 200;
response.statusText = '';
response.ok = true;
response.headers = new Headers({ status: '200' });
response.redirected = false;
response.type = 'basic';

Mocks based on different logins

Finally, because the configure/setMockUrlResponse functions take in a simple URL-response mapping, using different mocks at different times becomes incredibly user-friendly. For example, if your data changes based on which user is logged in, then the MockRequests API is particularly easy to work with. In this case, after defining each user's mock responses, you could nest them in a single loginMocks object and simply choose which login to use:

const bobMocks = {
    [homepageUrl]: bobHomepageMock,
    [friendsUrl]: bobFriendsMock
};
const aliceMocks = {
    [homepageUrl]: aliceHomepageMock,
    [friendsUrl]: aliceFriendsMock
};
const loginMocks = {
    bob: bobMocks,
    alice: aliceMocks
};

// Today, I want to be Alice
MockRequests.configure(loginMocks.alice);
// no, wait, I'll be Bob instead
MockRequests.configure(loginMocks.bob);

Other utility functions

For convenience, a mapStaticConfigToDynamic() function has been included to make converting the above static version of loginMocks to the dynamic counterpart easier:

// Example 1
// Convert a static URL-response mock to dynamic and add delay to home page
const dynamicBobMocks = MockRequests.mapStaticConfigToDynamic(bobMocks);
dynamicBobMocks[homepageUrl].delay = 1500;
MockRequests.configureDynamicResponses(dynamicBobMocks);

// Example 2
// Convert all loginMocks entries to dynamic counterparts
const dynamicLoginMocks = Object.keys(loginMocks).reduce((dynamicConfigs, user) => {
    dynamicConfigs[user] = MockRequests.mapStaticConfigToDynamic(loginMocks[user]);
    return dynamicConfigs;
}, {});
MockRequests.configureDynamicResponses(dynamicLoginMocks.bob);

// Example 3
// Merge user-agnostic dynamic mocks with static loginMocks
const dynamicMocks = {
    [searchApiPathname]: {
        dynamicResponseModFn: (req, res, queries) => {
            /* ... same as search query above */
        }
    }
};
const staticDynamicMerged = Object.keys(loginMocks).reduce((dynamicConfigs, user) => {
    dynamicConfigs[user] = {
        ...MockRequests.mapStaticConfigToDynamic(loginMocks[user]),
        ...dynamicMocks
    };
    return dynamicConfigs;
}, {});
MockRequests.configureDynamicResponses(staticDynamicMerged.bob);

Separating mocks from source code

Bare-bones instructions

In the simplest, bare-bones example, you could just import MockRequests into one of your entry JavaScript files (src/index.js, src/App.js, or similar) and configure your mocks there. As long as MockRequests was installed as a devDependency and you don't commit this code, it will never enter production.

// src/index.js for React project
import React from 'react';
import ReactDOM from 'react-dom';
import App from '/components/App';

import MockRequests from 'mock-requests';

MockRequests.configure(/* ... */);

ReactDOM.render(<App />, document.getElementById('root'));

However, for larger apps with many network calls or for sharing mocks with other team members, typing and removing mocks can get quite cumbersome. To simplify this, you could simply move mock-related code to a separate mocks/ folder and only import them when needed. This way, you can commit the mock code to your repo but, just like test code, it doesn't get deployed into production since it isn't in the src/ folder. For example, if we have the setup:

MyApp
├─── src/
|   ├─── (... source code)
├─── mocks/
|   ├─── MockConfig.js
|   ├─── StaticResponses.js
|   ├─── DynamicResponseConfigs.js
|   ├─── (... other mock files imported by MockConfig.js)

where MockConfig.js does all the mock-requests configuration, e.g.

// mocks/MockConfig.js

import MockRequests from 'mock-requests';
import { myStaticApiUrl, myDynamicApiUrl } from '../src/services/Urls.js';
import { myStaticApiResponse } from './StaticResponses'; // Other files in mocks/
import { myDynamicApiConfig } from './DynamicResponseConfigs';

MockRequests.setMockUrlResponse(myStaticApiUrl, myStaticApiResponse);
MockRequests.setDynamicMockUrlResponse(myDynamicApiUrl, myDynamicApiConfig);

then in your src/index.js file, just import the MockConfig.js file to activate all mocks, and don't commit that code change to keep all of it out of production:

import React from 'react';
import ReactDOM from 'react-dom';
import App from '/components/App';

import '../mocks/MockConfig';

ReactDOM.render(<App />, document.getElementById('root'));

Webpack Plugin/Activating via CLI

To avoid having to change your source code to activate/deactivate mocks (e.g. src/index.js above), MockRequests comes with a built-in plugin for projects using webpack. As such, assuming you have a separate directory of mocks and a single mock entry file (see above example), you can simply import the MockRequestsWebpackPlugin and use via:

// webpack.config.js
const MockRequestsWebpackPlugin = require('mock-requests/bin/MockRequestsWebpackPlugin');

module.exports = {
    // ...
    plugins: [
        // ...
         new MockRequestsWebpackPlugin(
            'mocks', // Holds all mock-related files imported by the entry file.
                     // Relative to the webpack "context"/project root (more on this below).
            'MockConfig.js', // Mock entry file, nested inside `mocks/`.
            process.env.MOCK === 'true' // Whether or not mocks should be activated.
        ),
        // ...
    ]
};

and run using MOCK=true npm start.

Use of this plugin will automatically transpile your code (according to your webpack config's JS/TS rules) and activate mocks based on the boolean of whether or not mocks should be activated. This means you never have to change anything in src/ or in webpack.config.js outside of this plugin.

If the boolean condition resolves to false, then nothing will be added to your build output, keeping mock files out of the final production code. In this example, our toggle is via CLI env variable, but it can be anything else of your choosing.

Plugin options

The webpack plugin comes with a few configuration options to accommodate all types of webpack configurations:

new MockRequestsWebpackPlugin(
    'mocks',
    'MockConfig.js',
    process.env.NODE_ENV === 'development',
    {
        pathsAreAbsolute,  // defaults to `false`
        transpileMocksDir // defaults to `true`
    }
),

If you prefer using absolute paths instead of relative, then change both the mocksDir and mockEntryFile arguments to be absolute, and set pathsAreAbsolute: true.

If you prefer to nest your mocks/ directory inside src/ or other directory that's already configured to be transpiled, then set transpileMocksDir: false for added simplicity in webpack processing.

Further customization

If your project doesn't use webpack or if you prefer to have more control over the file-processing, then you could instead use the resolve-mocks.js script to generate the paths to the mock directory/entry-file manually.

All you have to do is pass in the same fields from the MockRequestsWebpackPlugin into the resolveMocks() function, and spread the resulting entry/include arrays where you want them processed. For example:

// webpack.config.js

// Returns an object containing arrays to spread in webpack's `include` and `entry` fields.
// resolveMocks(mockDirectory, mockEntryFile, activateMocksBoolean)
const resolveMocks = require('mock-requests/bin/resolve-mocks');
const resolvedMocks = resolveMocks('mocks', 'mocks/MockConfig.js', process.env.MOCK === 'true');

module.exports = {
    module: {
        rules: [
            {
                test: /\.jsx?$/,
                // adds mocks/ directory to loaders for transpilation
                include: [ /src/, ...resolvedMocks.include ],
                exclude: [ /node_modules/ ],
                loader: 'babel-loader'
            }
        ]
    },
    // adds mocks/MockConfig.js entry file to build output
    entry: [ '@babel/polyfill', './src/index.js', ...resolvedMocks.entry ]
}

and run using MOCK=true npm start.

Doing so will result in the same outcome of the webpack plugin: transpilation of the mocks/ directory so you can write your mocks with the latest JS features, as well as adding the mock entry file to your build/run output dynamically -- all while still being toggled by the CLI. Like the plugin, the mocks won't be added to your build output unless the boolean condition resolves to true.

MockRequests API

In order to make mocking your network calls simpler, config functions have been added to allow for setting, getting, and deleting mock responses for your network calls.

These are described at length in the JSDoc.

configure(staticUrlResponseConfigObject, overwritePreviousConfig = true)
configureDynamicResponses(dynamicUrlResponseConfigObject, overwritePreviousConfig = true)
setMockUrlResponse(url, staticMockResponseObject)
setDynamicMockUrlResponse(url, dynamicMockResponseObject)
getResponse(url)
deleteMockUrlResponse(urlNotMeantToBeMocked)
clearAllMocks()
mapStaticConfigToDynamic(staticConfig)
OriginalXHR()
originalFetch()

Note that OriginalXHR and originalFetch will use the original XMLHttpRequest and fetch respectively, regardless of if you've set the mock URL responses in MockRequests.configure() or MockRequests.setMockUrlResponse(...). It will also use XMLHttpRequest and fetch regardless of if the browser supports them or not (will be undefined in cases where the browser doesn't support them).

Implementation notes

This library also works with other members of the Fetch API, so you can alternatively use an instance of the Request class in your fetch() calls (e.g. fetch(new Request(url, options))) or read from the Headers instance of response.headers.
You may import either the MockRequests default export or any of its individual fields, e.g.
import MockRequests, { setMockUrlResponse } from 'mock-requests';
This works with any environment that uses either fetch or XMLHttpRequest, regardless of if said environment is a browser, web/service worker, or a NodeJS script. As long as fetch and/or XMLHttpRequest are defined globally (whether natively or by polyfill), any network request to a URL configured by MockRequests will be mocked appropriately. For example:
```
// my-script.js - called via `node my-script.js`
require('isomorphic-fetch');

const MockRequests = require('mock-requests');

// ... use fetch and MockRequests as normal
```

License

MIT

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ReadMe.md

ReadMe.md

MockRequests

Backed and Used by:

Contents

Features

Installation

Usage

Quick note about usage in back-end or NodeJS scripts

Examples

Static responses

Basic configuration

Mixing mocks with actual API calls

Dynamic responses

Modifying responses by payload

Modifying responses by query parameters

Delaying resolution time

Customizing response properties

Mocks based on different logins

Other utility functions

Separating mocks from source code

Bare-bones instructions

Webpack Plugin/Activating via CLI

Plugin options

Further customization

MockRequests API

Implementation notes

License

Files

ReadMe.md

Latest commit

History

ReadMe.md

File metadata and controls

MockRequests

Backed and Used by:

Contents

Features

Installation

Usage

Quick note about usage in back-end or NodeJS scripts

Examples

Static responses

Basic configuration

Mixing mocks with actual API calls

Dynamic responses

Modifying responses by payload

Modifying responses by query parameters

Delaying resolution time

Customizing response properties

Mocks based on different logins

Other utility functions

Separating mocks from source code

Bare-bones instructions

Webpack Plugin/Activating via CLI

Plugin options

Further customization

MockRequests API

Implementation notes

License