| Name | Version | Modules |
|---|---|---|
| Qt | >= 5.5.0 | concurrent, core, gui, network, opengl, svg, widget, xml |
| GCC/MinGW | >= 4.8 | C++11 enabled |
| toxcore | >= 0.2.10 | core, av |
| FFmpeg | >= 2.6.0 | avformat, avdevice, avcodec, avutil, swscale |
| CMake | >= 2.8.11 | |
| OpenAL Soft | >= 1.16.0 | |
| qrencode | >= 3.0.3 | |
| [sqlcipher] | >= 3.2.0 | |
| pkg-config | >= 0.28 | |
| snorenotify | >= 0.7.0 | optional dependency |
They can be disabled/enabled by passing arguments to cmake command when
building qTox.
If they are missing, qTox is built without support for the functionality.
Dependencies needed to run tests / code formatting, etc. Disabled if dependencies are missing.
| Name | Version |
|---|---|
| Check | >= 0.9 |
| Name | Version |
|---|---|
| sonnet | >= 5.45 |
Use -DSPELL_CHECK=OFF to disable it.
Note: Specified version was tested and works well. You can try to use older version, but in this case you may have some errors (including a complete lack of spell check).
| Name | Version |
|---|---|
| libXScrnSaver | >= 1.2 |
| libX11 | >= 1.6.0 |
Disabled if dependencies are missing during compilation.
Disabled by default
| Name | Version |
|---|---|
| snorenotify | >= 0.7.0 |
To enable: -DDESKTOP_NOTIFICATIONS=True
Easy qTox install is provided for variety of distributions:
PKGBUILD is available in the community repo, to install:
pacman -S qtoxqTox is available in the RPM Fusion repo, to install:
dnf install qtoxqTox is available in Gentoo.
To install:
emerge qtoxqTox is available in openSUSE Factory.
To install in openSUSE 15.0 or newer:
zypper in qtoxTo install in openSUSE 42.3:
zypper ar -f https://download.opensuse.org/repositories/server:/messaging/openSUSE_Leap_42.3 server:messaging
zypper in qtoxqTox SlackBuild and all of its dependencies can be found here: http://slackbuilds.org/repository/14.2/network/qTox/
If your distribution is not listed, or you want / need to compile qTox, there are provided instructions.
Most of the dependencies should be available through your package manager. You
may either follow the directions below, or simply run ./simple_make.sh after
cloning this repository, which will attempt to automatically download
dependencies followed by compilation.
In order to clone the qTox repository you need Git.
sudo pacman -S --needed gitsudo apt-get install gitsudo dnf install gitsudo zypper install gitsudo apt-get install gitAfterwards open a new terminal, change to a directory of your choice and clone the repository:
cd /home/$USER/qTox
git clone https://github.com/qTox/qTox.git qToxThe following steps assumes that you cloned the repository at
/home/$USER/qTox. If you decided to choose another location, replace
corresponding parts.
sudo pacman -S --needed base-devel qt5 openal libxss qrencode ffmpeg opus libvpx libsodium sqlciphersudo apt-get install \
automake \
autotools-dev \
build-essential \
check \
checkinstall \
cmake \
ffmpeg \
libavcodec-dev \
libavdevice-dev \
libexif-dev \
libgdk-pixbuf2.0-dev \
libgtk2.0-dev \
libkdeui5 \
libopenal-dev \
libopus-dev \
libqrencode-dev \
libqt5opengl5-dev \
libqt5svg5-dev \
libsodium-dev \
libsqlcipher-dev \
libtool \
libvpx-dev \
libxss-dev \
pkg-config \
qrencode \
qt5-default \
qttools5-dev \
qttools5-dev-tools \
yasmTo install FFmpeg, the RPM Fusion repo is required.
sudo dnf group install "Development Tools" "C Development Tools and Libraries"
# (can also use):
# sudo dnf install @"Development Tools" @"C Development Tools and Libraries"
sudo dnf install \
autoconf \
automake \
check \
check-devel \
ffmpeg-devel \
gtk2-devel \
kf5-sonnet \
libexif-devel \
libsodium-devel \
libtool \
libvpx-devel \
libXScrnSaver-devel \
openal-soft-devel \
openssl-devel \
opus-devel \
qrencode-devel \
qt5-devel \
qt5-linguist \
qt5-qtsvg \
qt5-qtsvg-devel \
qt-creator \
qt-doc \
qtsingleapplication-qt5 \
sqlcipher \
sqlcipher-develsudo zypper install \
libexif-devel \
libffmpeg-devel \
libopus-devel \
libQt5Concurrent-devel \
libqt5-linguist \
libQt5Network-devel \
libQt5OpenGL-devel \
libqt5-qtbase-common-devel \
libqt5-qtsvg-devel \
libQt5Xml-devel \
libsodium-devel \
libvpx-devel \
libXScrnSaver-devel \
openal-soft-devel \
patterns-openSUSE-devel_basis \
qrencode-devel \
sqlcipher-devel \
sonnet-devel \
qt5-linguist-devel \
libQt5Test-devel \
ffmpeg-4-libavcodec-devel \
ffmpeg-4-libavdevice-develList of all the toxcore dependencies and their SlackBuilds can be found here: http://slackbuilds.org/repository/14.2/network/toxcore/
List of all the qTox dependencies and their SlackBuilds can be found here: http://slackbuilds.org/repository/14.2/network/qTox/
sudo apt-get install \
build-essential \
cmake \
libavcodec-dev \
libavdevice-dev \
libavfilter-dev \
libavutil-dev \
libexif-dev \
libgdk-pixbuf2.0-dev \
libglib2.0-dev \
libgtk2.0-dev \
libkdeui5 \
libopenal-dev \
libopus-dev \
libqrencode-dev \
libqt5opengl5-dev \
libqt5svg5-dev \
libsodium-dev \
libsqlcipher-dev \
libswresample-dev \
libswscale-dev \
libvpx-dev \
libxss-dev \
qrencode \
qt5-default \
qttools5-dev-tools \
qttools5-devNormally you don't want to do that, bootstrap.sh will do it for you.
Provided that you have all required dependencies installed, you can simply run:
git clone https://github.com/toktok/c-toxcore.git toxcore
cd toxcore
git checkout v0.2.11
cmake . -DBOOTSTRAP_DAEMON=OFF
make -j$(nproc)
sudo make install
# we don't know what whether user runs 64 or 32 bits, and on some distros
# (Fedora, openSUSE) lib/ doesn't link to lib64/, so add both
echo '/usr/local/lib64/' | sudo tee -a /etc/ld.so.conf.d/locallib.conf
echo '/usr/local/lib/' | sudo tee -a /etc/ld.so.conf.d/locallib.conf
sudo ldconfigMake sure that all the dependencies are installed. If you experience problems with compiling, it's most likely due to missing dependencies, so please make sure that you did install all of them.
If you are compiling on Fedora 25, you must add libtoxcore to the
PKG_CONFIG_PATH environment variable manually:
# we don't know what whether user runs 64 or 32 bits, and on some distros
# (Fedora, openSUSE) lib/ doesn't link to lib64/, so add both
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib64/pkgconfig"
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig"
Run in qTox directory to compile:
cmake .
make -j$(nproc)Now you can start compiled qTox with ./qtox
Congratulations, you've compiled qTox :)
If the compiling process stops with a missing dependency like:
... libswscale/swscale.h missing try:
apt-file search libswscale/swscale.hAnd install the package that provides the missing file.
Start make again. Repeat if necessary until all dependencies are installed. If
you can, please note down all additional dependencies you had to install that
aren't listed here, and let us know what is missing ;)
Alternately, qTox now has the experimental and probably-dodgy ability to package
itself (in .deb form natively, and .rpm form with
alien).
After installing the required dependencies, run bootstrap.sh and then run the
buildPackages.sh script, found in the tools folder. It will automatically get
the packages necessary for building .debs, so be prepared to type your
password for sudo.
See AppArmor to enable confinement for increased security.
qTox is available as a binary package. To install the qTox package:
pkg install qToxThe qTox port is also available at net-im/qTox. To build and install qTox
from sources using the port:
cd /usr/ports/net-im/qTox
make install cleanSupported OS X versions: >=10.8. (NOTE: only 10.13 is tested during CI)
Compiling qTox on OS X for development requires 2 tools: Xcode and homebrew.
You can now set up your OS X system to compile qTox automatically thanks to the
script in: ./osx/qTox-Mac-Deployer-ULTIMATE.sh
This script can be run independently of the qTox repo and is all that's needed to build from scratch on OS X.
To use this script you must launch terminal which can be found:
Applications > Utilities > Terminal.app
If you wish to lean more you can run ./qTox-Mac-Deployer-ULTIMATE.sh -h
Note that the script will revert any non-committed changes to qTox repository
during the update phase.
If you are running the script for the first time you will want to make sure your
system is ready. To do this simply run ./qTox-Mac-Deployer-ULTIMATE.sh -i to
run you through the automated install set up.
After running the installation setup you are now ready to build qTox from
source, to do this simply run: ./qTox-Mac-Deployer-ULTIMATE.sh -b
If there aren't any errors then you'll find a locally working qTox application
in your home folder under ~/qTox-Mac_Build
If you want to update your application for testing purposes or you want to run a
nightly build setup then run: ./qTox-Mac-Deployer-ULTIMATE.sh -u and follow
the prompts. (NOTE: If you know you updated the repos before running this hit Y)
followed by ./qTox-Mac-Deployer-ULTIMATE.sh -b to build the application once
more. (NOTE: This will delete your previous build.)
OS X requires an extra step to make the qTox.app file shareable on a system
that doesn't have the required libraries installed already.
If you want to share the build you've made with your other friends who use OS X
then simply run: ./qTox-Mac-Deployer-ULTIMATE.sh -d
Install homebrew if you don't have it:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"First, let's install the dependencies available via brew.
brew install git ffmpeg qrencode libtool automake autoconf check qt5 libvpx \
opus sqlcipher libsodiumNext, install toxcore
Then, clone qTox:
git clone https://github.com/qTox/qToxFinally, copy all required files. Whenever you update your brew packages, you may skip all of the above steps and simply run the following commands:
cd ./git/qTox
sudo bash bootstrap-osx.shYou can build qTox with Qt Creator seperate download or manually with cmake
With that; in your terminal you can compile qTox in the git dir:
cmake .
makeOr a cleaner method would be to:
cd ./git/dir/qTox
mkdir ./build
cd build
cmake ..If you compiled qTox properly you can now deploy the qTox.app that's created
where you built qTox so you can distribute the package.
Using your qt5 homebrew installation from the build directory:
/usr/local/Cellar/qt5/5.5.1_2/bin/macdeployqt ./qTox.appYou've got 2 choices, either click on the qTox app that suddenly exists, or do the following:
qtox.app/Contents/MacOS/qtoxEnjoy the snazzy CLI output as your friends and family congratulate you on becoming a hacker
Download the Qt online installer for Windows from
qt.io. While installation you have
to assemble your Qt toolchain. Take the most recent version of Qt compiled with
MinGW. Although the installer provides its own bundled MinGW compiler toolchain
its recommend installing it separately because Qt is missing MSYS which is
needed to compile and install OpenAL. Thus you can - if needed - deselect the
tab Tools. The following steps assume that Qt is installed at C:\Qt. If you
decided to choose another location, replace corresponding parts.
Download the MinGW installer for Windows from
sourceforge.net. Make
sure to install MSYS (a set of Unix tools for Windows). The following steps
assume that MinGW is installed at C:\MinGW. If you decided to choose another
location, replace corresponding parts. Select mingw-developer-toolkit,
mingw32-base, mingw32-gcc-g++, msys-base and mingw32-pthreads-w32
packages using MinGW Installation Manager (mingw-get.exe). Check that the
version of MinGW, corresponds to the version of the QT component!
Download the Wget installer for Windows from
http://gnuwin32.sourceforge.net/packages/wget.htm. Install them. The following
steps assume that Wget is installed at C:\Program Files (x86)\GnuWin32\. If you
decided to choose another location, replace corresponding parts.
Download the UnZip installer for Windows from
http://gnuwin32.sourceforge.net/packages/unzip.htm. Install it. The following
steps assume that UnZip is installed at C:\Program Files (x86)\GnuWin32\. If you
decided to choose another location, replace corresponding parts.
Add MinGW/MSYS/CMake binaries to the system path to make them globally
accessible. Open Control Panel -> System and Security -> System ->
Advanced system settings -> Environment Variables... (or run sysdm.cpl
select tab Advanced system settings -> button Environment Variables). In the
second box search for the PATH variable and press Edit.... The input box
Variable value: should already contain some directories. Each directory is
separated with a semicolon. Extend the input box by adding
;C:\MinGW\bin;C:\MinGW\msys\1.0\bin;C:\Program Files (x86)\CMake 2.8\bin;C:\Program Files (x86)\GnuWin32\bin.
The very first semicolon must only be added if it is missing. CMake may be added
by installer automatically. Make sure that paths containing alternative sh,
bash implementations such as C:\Program Files\OpenSSH\bin are at the end of
PATH or build may fail.
Clone the repository (https://github.com/qTox/qTox.git) with your preferred Git
client. SmartGit or
TorteiseGit are both very nice for this task
(you may need to add git.exe to your PATH system variable). The
following steps assume that you cloned the repository at C:\qTox. If you
decided to choose another location, replace corresponding parts.
Run bootstrap.bat in the previously cloned C:\qTox repository. The script will
download the other necessary dependencies, compile them and put them into their
appropriate directories.
Note that there have been detections of false positives by some anti virus software in the past within some of the libraries used. Please refer to the wiki page problematic antiviruses for more information if you run into troubles on that front.
They are passed as an argument to cmake command. E.g. with a switch SWITCH
that has value YES it would be passed to cmake in a following manner:
cmake -DSWITCH=yesSwitches:
SMILEYS, values:- if not defined or an unsupported value is passed, all emoticon packs are included
DISABLED– don't include any emoticon packs, custom ones are still loadedMIN– minimal support for emoticons, only a single emoticon pack is included