Most likely you're reading this because you intend to submit a GitHub pull request ("PR") targeting one of the stable branches ("nautilus", etc.) at https://github.com/ceph/ceph.
Before you open that PR, please read this entire document or, at the very least, the following two sections: General principles and Cherry-picking rules.
Contents
To help the people who will review your backport, please state either in the
backport PR, or in the backport tracker issue, or in the main branch tracker issue:
- what bug is fixed
- why this fix is the minimal way to do it
- why does this need to be fixed in <release>
The above should be followed especially in cases when the backport could be seen as introducing, into a stable branch, code that is not related to a particular bug or issue.
Rationale: every modification of a stable branch carries a certain risk of introducing a regression. To minimize this risk, backports should be as straightforward and narrowly-targeted as possible. As a stable release series ages, the importance of following these general principles rises.
The following rules, which have been codified from "best practices" developed over years of backporting, apply to the actual backport implementation:
- all fixes should land in
mainfirst - commits to stable branches should be cherry-picked from
main - before starting to cherry-pick a set of commits from
main, grep themaingit history for the SHA1 of eachmaincommit (usinggit log --grep) to check for follow-up fixes. Include any follow-up fixes found in the set of commits to be cherry-picked. - when backporting a
mainPR to a stable branch, double-check that the backport PR contains cherry-picks of all of themainPR's commits. If any commit needs to be omitted, declare and explain this in the PR. - cherry-picks must be done using
git cherry-pick -x - if a cherry-pick from
mainis not feasible and a direct fix is being undertaken, this must be explained - the commit message generated by
git cherry-pick -xmust not be modified, except to add a "Conflicts" section below the "cherry picked from commit ..." line added by git - the "Conflicts" section must mention all files where changes had to be made manually (not just conflicts flagged by git)
- the "Conflicts" section should also describe the manual changes that were made
- if a change is to be backported to multiple stable branches, a tracker issue is needed, so the backports can be tracked (if a change is only to be backported to the most recent stable branch, a tracker issue is not strictly required)
For more information on tracker issues, see Tracker workflow.
For more information on conflict resolution and writing the "Conflicts" section, see Conflict resolution.
Adhering to these rules will make your backport easier for reviewers to understand. Not adhering to these rules creates additional work for reviewers and may cause your backport PR to be rejected.
What does "all fixes should land in main first" mean? What if I just need to
fix the issue in <release>?
As the person fixing the issue, you are required to first check whether the
issue exists in main. If it does, then the proper course of action is to
create a main branch tracker (see Tracker workflow) and fix the issue in main,
first, and only then cherry-pick the fix to the stable branches that have the
issue.
If the issue exists in the stable branch, but not in main, there are several
possibilities:
- it's a regression introduced into the stable branch by a bad backport
- the issue was fixed in
mainby some massive refactoring that cannot be backported - the issue was already fixed in
mainby a cherry-pickable commit
In cases 1 and 2, it's permissible to fix the issue directly in the most recent
stable branch, subject to the rule "if a commit could not be cherry-picked from
main, the commit message must explain why that was not possible". Once the
fix has landed in the most recent stable branch, it can be cherry-picked to
older stable branches from there.
In case 3, the issue should be handled like any other backport - read on.
Any change that is to be backported to multiple stable branches should have an associated tracker issue at https://tracker.ceph.com.
For fixes already merged to main, this may have already been done - see the
Fixes: line in the main PR. If the main PR has already been merged and
there is no associated main branch tracker issue, you can create a main branch tracker
issue and fill in the fields as described below.
This main branch tracker issue should be in the "Bug" or "Feature"
trackers of the relevant subproject under the "Ceph" parent project (or
in the "Ceph" project itself if none of the subprojects are a good fit).
The stable branches to which the main changes are to be cherry-picked should
be listed in the "Backport" field. For example:
Backport: mimic, nautilus
Once the PR targeting main is open, add the PR number assigned by GitHub to
the tracker issue. For example, if the PR number is 99999:
Pull request ID: 99999
Once the main PR has been merged, after checking that the change really needs
to be backported and the Backport field has been populated, change the main
branch tracker issue's Status field to "Pending Backport".
Status: Pending Backport
If you do not have sufficient permissions to modify any field of the tracker issue, just add a comment describing what changes you would like to make. Someone with permissions will make the necessary modifications on your behalf.
Authors of pull requests are responsible for creating associated backport pull requests. As long as you have sufficient permissions at https://tracker.ceph.com, you can create Backport tracker issues and stage backports yourself. Read these linked sections to learn how to create backport tracker issues and how to stage backports:
To track backporting efforts, "backport tracker issues" can be created from
a parent "main branch tracker issue". The main branch tracker issue is described in the
previous section, Tracker workflow. This section focuses the backport tracker
issue.
Once the entire Tracker workflow has been completed for the main branch tracker issue,
issues can be created in the backport tracker issue for tracking the backporting work.
Under ordinary circumstances, the developer who merges the main PR will flag
the main branch tracker issue for backport by changing the Status to "Pending
Backport".
You might be tempted to forge ahead and create the backport issues yourself. Please don't do that - it is difficult (bordering on impossible) to get all the fields correct when creating backport issues manually, and why even try when there is a script that gets it right every time? Setting up the script requires a small up-front time investment. Once that is done, creating backport issues becomes trivial.
The script used to create backport issues is located at
src/script/backport-create-issue in the main branch. Though there might be
an older version of this script in a stable branch, do not use it. Only use the
most recent version from main.
Once you have the script somewhere in your PATH, you can proceed to install the dependencies.
The dependencies are:
- python3
- python-redmine
Python 3 should already be present on any recent Linux installation. The second dependency, python-redmine, can be obtained from PyPi:
pip3 install --user python-redmine
Then, try to run the script:
backport-create-issue --help
This should produce a usage message.
Finally, run the script to actually create the Backport issues. For example, if the tracker issue number is 55555:
backport-create-issue --user <tracker_username> --password <tracker_password> 55555
The script needs to know your https://tracker.ceph.com credentials in order to
authenticate to Redmine. In lieu of providing your literal username and password
on the command line, you could also obtain a REST API key ("My account" -> "API
access key"), put it in ~/.redmine_key and run the script like so:
backport-create-issue 55555
Once the Tracker workflow is completed and the backport tracker issue has been created, it's time to open a backport PR. One possibility is to do this manually, while taking care to follow the cherry-picking rules. However, this can result in a backport that is not properly staged. For example, the PR description might not contain a link to the backport tracker issue (a common oversight). You might even forget to update the backport tracker issue.
In the past, much time was lost, and much frustration caused, by the necessity of staging backports manually. Now, fortunately, there is a script available which automates the process and takes away most of the guesswork.
Similar to the case of creating backport tracker issues, staging the actual backport PR and updating the Backport tracker issue is difficult - if not impossible - to get right if you're doing it manually, and quickly becomes tedious if you do it more than once in a long while.
The ceph-backport.sh script automates the entire process of cherry-picking
the commits from the main PR, opening the GitHub backport PR, and
cross-linking the GitHub backport PR with the correct Backport tracker issue.
The script can also be used to good effect if you have already manually prepared
the backport branch with the cherry-picks in it.
The script is located at src/script/ceph-backport.sh in the main
branch. Though there might be an older version of this script in a stable
branch, do not use it. Only use the most recent version from the main branch.
To do this from anywhere and from any branch use the following
alias that will use the most recent script in upstream/main of your
local ceph clone on every call:
alias ceph-backport.sh="bash <(git --git-dir=$pathToCephClone/.git --no-pager show upstream/main:src/script/ceph-backport.sh)"
ceph-backport.sh is just a bash script, so the only dependency is bash
itself, but it does need to be run in the top level of a local clone of
ceph/ceph.git. A small up-front time investment is required to get the
script working in your environment. This is because the script needs to
authenticate itself (i.e., as you) in order to use the GitHub and Redmine REST
API services.
The script is self-documenting. Just run the script and proceed from there.
Once the script has been set up properly, you can validate the setup like so:
ceph-backport.sh --setup
Once you have this saying "Overall setup is OK", you have two options for staging the backport: either leave everything to the script, or prepare the backport branch yourself and use the script only for creating the PR and updating the Backport tracker issue.
If you prefer to leave everything to the script, just provide the Backport tracker issue number to the script:
ceph-backport.sh 55555
The script will start by creating the backport branch in your local git clone. The script always uses the following format for naming the branch:
wip-<backport_issue_number>-<name_of_stable_branch>
For example, if the Backport tracker issue number is 55555 and it's targeting the stable branch "nautilus", the backport branch would be named:
wip-55555-nautilus
If you prefer to create the backport branch yourself, just do that. Be sure to name the backport branch as described above. (It's a good idea to use this branch naming convention for all your backporting work.) Then, run the script:
ceph-backport.sh 55555
The script will see that the backport branch already exists, and use it.
Once the script hits the first cherry-pick conflict, it will no longer provide any cherry-picking assistance, so in that case it's up to you to resolve the conflict(s) (as described in Conflict resolution) and finish cherry-picking all of the remaining commits. Once you are satisfied that the backport is complete in your local branch, ceph-backport.sh can finish the job of creating the pull request and updating the backport tracker issue. To make that happen, just re-run the script exactly as you did before:
ceph-backport.sh $BACKPORT_TRACKER_ID
The script will detect that it is running from a branch with the same name as the one it would normally create on the first run and continues after the cherry-picking phase.
For a quick reference on CLI, that contains above information, you can run:
ceph-backport.sh --usage
If git reports conflicts, the script will abort to allow you to resolve the conflicts manually.
Once the conflicts are resolved, complete the cherry-pick
git cherry-pick --continue
Git will present a draft commit message with a "Conflicts" section.
Unfortunately, in recent versions of git, the Conflicts section is commented out. Since the Conflicts section is mandatory for Ceph backports that do not apply cleanly, you will need to uncomment the entire "Conflicts" section of the commit message before committing the cherry-pick. You can also include commentary on what the conflicts were and how you resolved them. For example:
Conflicts:
src/foo/bar.cc
- mimic does not have blatz; use batlo instead
When editing the cherry-pick commit message, leave everything before the "cherry picked from" line unchanged. Any edits you make should be in the part following that line. Here is an example:
osd: check batlo before setting blatz Setting blatz requires special precautions. Check batlo first. Fixes: https://tracker.ceph.com/issues/99999 Signed-off-by: Random J Developer <[email protected]> (cherry picked from commit 01d73020da12f40ccd95ea1e49cfcf663f1a3a75) Conflicts: src/osd/batlo.cc - add_batlo_check has an extra arg in newer code
Naturally, the Fixes line points to the main issue. You might be tempted
to modify it so it points to the backport issue, but - please - don't do that.
First, the main issue points to all the backport issues, and second, any
editing of the original commit message calls the entire backport into doubt,
simply because there is no good reason for such editing.
The part below the (cherry picked from commit ...) line is fair game for
editing. If you need to add additional information to the cherry-pick commit
message, append that information below this line. Once again: do not modify the
original commit message.
If you use ceph-backport.sh for your backport creation (which is recommended), read up at the end of The ceph-backport.sh script on how to continue from here.
Once the backport PR is open, the first order of business is to set the Milestone tag to the stable release the backport PR is targeting. For example, if the PR is targeting "nautilus", set the Milestone tag to "nautilus".
Next, check which component label was applied to the main PR corresponding to
this backport, and double-check that that label is applied to the backport PR as
well. For example, if the main PR carries the component label "core", the
backport PR should also get that label.
Once your backport PR is open, it will be reviewed and tested. When the PR has been reviewed and tested, it will be merged.
If you would like to facilitate this process, you can solicit reviews and run integration tests on the PR. In this case, add comments to the PR describing the tests you ran and their results.
Once the PR has been reviewed and deemed to have undergone sufficient testing, it will be merged. Even if you have sufficient GitHub permissions to merge the PR, please do not merge it yourself. (Uncontrolled merging to stable branches unnecessarily complicates the release preparation process, which is done by volunteers.)