Skip to content

Latest commit

 

History

History
240 lines (202 loc) · 9.59 KB

config.md

File metadata and controls

240 lines (202 loc) · 9.59 KB
Raw

Advanced Graph Node configuration

This feature is considered experimental. In particular, the format of the configuration file might still change in backwards-incompatible ways

A TOML configuration file can be used to set more complex configurations than those exposed in the CLI. The location of the file is passed with the --config command line switch. When using a configuration file, it is not possible to use the options --postgres-url, --postgres-secondary-hosts, and --postgres-host-weights.

The TOML file consists of four sections:

  • [chains] sets the endpoints to blockchain clients.
  • [store] describes the available databases.
  • [ingestor] sets the name of the node responsible for block ingestion.
  • [deployment] describes how to place newly deployed subgraphs.

Configuring Multiple Databases

For most use cases, a single Postgres database is sufficient to support a graph-node instance. When a graph-node instance outgrows a single Postgres database, it is possible to split the storage of graph-node's data across multiple Postgres databases. All databases together form the store of the graph-node instance. Each individual database is called a shard.

The [store] section must always have a primary shard configured, which must be called primary. Each shard can have additional read replicas that are used for responding to queries. Only queries are processed by read replicas. Indexing and block ingestion will always use the main database.

Any number of additional shards, with their own read replicas, can also be configured. When read replicas are used, query traffic is split between the main database and the replicas according to their weights. In the example below, for the primary shard, no queries will be sent to the main database, and the replicas will receive 50% of the traffic each. In the vip shard, 50% of the traffic goes to the main database, and 50% to the replica.

[store]
[store.primary]
connection = "postgresql://graph:${PGPASSWORD}@primary/graph"
weight = 0
pool_size = 10
[store.primary.replicas.repl1]
connection = "postgresql://graph:${PGPASSWORD}@primary-repl1/graph"
weight = 1
[store.primary.replicas.repl2]
connection = "postgresql://graph:${PGPASSWORD}@primary-repl2/graph"
weight = 1

[store.vip]
connection = "postgresql://graph:${PGPASSWORD}@${VIP_MAIN}/graph"
weight = 1
pool_size = 10
[store.vip.replicas.repl1]
connection = "postgresql://graph:${PGPASSWORD}@${VIP_REPL1}/graph"
weight = 1

The connection string must be a valid libpq connection string. Before passing the connection string to Postgres, environment variables embedded in the string are expanded.

Setting the pool_size

Each shard must indicate how many database connections each graph-node instance should keep in its connection pool for that database. For replicas, the pool size defaults to the pool size of the main database, but can also be set explicitly. Such a setting replaces the setting from the main database.

The pool_size can either be a number like in the example above, in which case any graph-node instance will use a connection pool of that size, or a set of rules that uses different sizes for different graph-node instances, keyed off the node_id set on the command line. When using rules, the pool_size is set like this:

pool_size = [
  { node = "index_node_general_.*", size = 20 },
  { node = "index_node_special_.*", size = 30 },
  { node = "query_node_.*", size = 80 }
]

Each rule consists of a regular expression node and the size that should be used if the current instance's node_id matches that regular expression. You can use the command graphman config pools to check how many connections each graph-node instance will use, and how many database connections will be opened by all graph-node instance. The rules are checked in the order in which they are written, and the first one that matches is used. It is an error if no rule matches.

It is highly recommended to run graphman config pools $all_nodes every time the configuration is changed to make sure that the connection pools are what is expected. Here, $all_nodes should be a list of all the node names that will use this configuration file.

Configuring Ethereum Providers

The [chains] section controls the ethereum providers that graph-node connects to, and where blocks and other metadata for each chain are stored. The section consists of the name of the node doing block ingestion (currently not used), and a list of chains. The configuration for a chain name is specified in the section [chains.<name>], and consists of the shard where chain data is stored and a list of providers for that chain. For each provider, the following information must be given:

  • label: a label that is used when logging information about that provider (not implemented yet)
  • transport: one of rpc, ws, and ipc. Defaults to rpc.
  • url: the URL for the provider
  • features: an array of features that the provider supports, either empty or any combination of traces and archive
  • headers: HTTP headers to be added on every request. Defaults to none.

The following example configures two chains, mainnet and kovan, where blocks for mainnet are stored in the vip shard and blocks for kovan are stored in the primary shard. The mainnet chain can use two different providers, whereas kovan only has one provider.

[chains]
ingestor = "block_ingestor_node"
[chains.mainnet]
shard = "vip"
provider = [
  { label = "mainnet1", url = "http://..", features = [], headers = { Authorization = "Bearer foo" } },
  { label = "mainnet2", url = "http://..", features = [ "archive", "traces" ] }
]
[chains.kovan]
shard = "primary"
provider = [ { label = "kovan", url = "http://..", features = [] } ]

Controlling Deployment

When graph-node receives a request to deploy a new subgraph deployment, it needs to decide in which shard to store the data for the deployment, and which of any number of nodes connected to the store should index the deployment. That decision is based on a number of rules defined in the [deployment] section. Deployment rules can match on the subgraph name and the network that the deployment is indexing.

Rules are evaluated in order, and the first rule that matches determines where the deployment is placed. The match element of a rule can have a name, a regular expression that is matched against the subgraph name for the deployment, and a network name that is compared to the network that the new deployment indexes. The network name can either be a string, or a list of strings.

The last rule must not have a match statement to make sure that there is always some shard and some indexer that will work on a deployment.

The rule indicates the name of the shard where the data for the deployment should be stored, which defaults to primary, and a list of indexers. For the matching rule, one indexer is chosen from the indexers list so that deployments are spread evenly across all the nodes mentioned in indexers. The names for the indexers must be the same names that are passed with --node-id when those index nodes are started.

Instead of a fixed shard, it is also possible to use a list of shards; in that case, the system uses the shard from the given list with the fewest active deployments in it.

[deployment]
[[deployment.rule]]
match = { name = "(vip|important)/.*" }
shard = "vip"
indexers = [ "index_node_vip_0", "index_node_vip_1" ]
[[deployment.rule]]
match = { network = "kovan" }
# No shard, so we use the default shard called 'primary'
indexers = [ "index_node_kovan_0" ]
[[deployment.rule]]
match = { network = [ "xdai", "poa-core" ] }
indexers = [ "index_node_other_0" ]
[[deployment.rule]]
# There's no 'match', so any subgraph matches
shards = [ "sharda", "shardb" ]
indexers = [
    "index_node_community_0",
    "index_node_community_1",
    "index_node_community_2",
    "index_node_community_3",
    "index_node_community_4",
    "index_node_community_5"
  ]

Query nodes

Nodes can be configured to explicitly be query nodes by including the following in the configuration file:

[general]
query = "<regular expression>"

Any node whose --node-id matches the regular expression will be set up to only respond to queries. For now, that only means that the node will not try to connect to any of the configured Ethereum providers.

Basic Setup

The following file is equivalent to using the --postgres-url command line option:

[store]
[store.primary]
connection="<.. postgres-url argument ..>"
[deployment]
[[deployment.rule]]
indexers = [ "<.. list of all indexing nodes ..>" ]

Validating configuration files

A configuration file can be checked for validity by passing the --check-config flag to graph-node. The command

graph-node --config $CONFIG_FILE --check-config

will read the configuration file and print information about syntax errors or, for valid files, a JSON representation of the configuration.

Simulating deployment placement

Given a configuration file, placement of newly deployed subgraphs can be simulated with

graphman --config $CONFIG_FILE config place some/subgraph mainnet

The command will not make any changes, but simply print where that subgraph would be placed. The output will indicate the database shard that will hold the subgraph's data, and a list of indexing nodes that could be used for indexing that subgraph. During deployment, graph-node chooses the indexing nodes with the fewest subgraphs currently assigned from that list.